Class: Net::SFTP::Session

Inherits:
Object
  • Object
show all
Includes:
Constants::PacketTypes, Net::SSH::Loggable
Defined in:
lib/net/sftp/session.rb

Overview

The Session class encapsulates a single SFTP channel on a Net::SSH connection. Instances of this class are what most applications will interact with most, as it provides access to both low-level (mkdir, rename, remove, symlink, etc.) and high-level (upload, download, etc.) SFTP operations.

Although Session makes it easy to do SFTP operations serially, you can also set up multiple operations to be done in parallel, too, without needing to resort to threading. You merely need to fire off the requests, and then run the event loop until all of the requests have completed:

handle1 = sftp.open!("/path/to/file1")
handle2 = sftp.open!("/path/to/file2")

r1 = sftp.read(handle1, 0, 1024)
r2 = sftp.read(handle2, 0, 1024)
sftp.loop { [r1, r2].any? { |r| r.pending? } }

puts "chunk #1: #{r1.response[:data]}"
puts "chunk #2: #{r2.response[:data]}"

By passing blocks to the operations, you can set up powerful state machines, to fire off subsequent operations. In fact, the Net::SFTP::Operations::Upload and Net::SFTP::Operations::Download classes set up such state machines, so that multiple uploads and/or downloads can be running simultaneously.

The convention with the names of the operations is as follows: if the method name ends with an exclamation mark, like #read!, it will be synchronous (e.g., it will block until the server responds). Methods without an exclamation mark (e.g. #read) are asynchronous, and return before the server has responded. You will need to make sure the SSH event loop is run in order to process these requests. (See #loop.)

Constant Summary collapse

HIGHEST_PROTOCOL_VERSION_SUPPORTED =

The highest protocol version supported by the Net::SFTP library.

6

Constants included from Constants::PacketTypes

Constants::PacketTypes::FXP_ATTRS, Constants::PacketTypes::FXP_BLOCK, Constants::PacketTypes::FXP_CLOSE, Constants::PacketTypes::FXP_DATA, Constants::PacketTypes::FXP_EXTENDED, Constants::PacketTypes::FXP_EXTENDED_REPLY, Constants::PacketTypes::FXP_FSETSTAT, Constants::PacketTypes::FXP_FSTAT, Constants::PacketTypes::FXP_HANDLE, Constants::PacketTypes::FXP_INIT, Constants::PacketTypes::FXP_LINK, Constants::PacketTypes::FXP_LSTAT, Constants::PacketTypes::FXP_MKDIR, Constants::PacketTypes::FXP_NAME, Constants::PacketTypes::FXP_OPEN, Constants::PacketTypes::FXP_OPENDIR, Constants::PacketTypes::FXP_READ, Constants::PacketTypes::FXP_READDIR, Constants::PacketTypes::FXP_READLINK, Constants::PacketTypes::FXP_REALPATH, Constants::PacketTypes::FXP_REMOVE, Constants::PacketTypes::FXP_RENAME, Constants::PacketTypes::FXP_RMDIR, Constants::PacketTypes::FXP_SETSTAT, Constants::PacketTypes::FXP_STAT, Constants::PacketTypes::FXP_STATUS, Constants::PacketTypes::FXP_SYMLINK, Constants::PacketTypes::FXP_UNBLOCK, Constants::PacketTypes::FXP_VERSION, Constants::PacketTypes::FXP_WRITE

Instance Attribute Summary collapse

Instance Method Summary collapse

Constructor Details

#initialize(session, &block) ⇒ Session

Creates a new Net::SFTP instance atop the given Net::SSH connection. This will return immediately, before the SFTP connection has been properly initialized. Once the connection is ready, the given block will be called. If you want to block until the connection has been initialized, try this:

sftp = Net::SFTP::Session.new(ssh)
sftp.loop { sftp.opening? }



78
79
80
81
82
83
84
85
 
# File 'lib/net/sftp/session.rb', line 78

def initialize(session, &block)
  @session    = session
  @input      = Net::SSH::Buffer.new
  self.logger = session.logger
  @state      = :closed

  connect(&block)
end

Instance Attribute Details

#channel ⇒ Object (readonly)

The Net::SSH::Connection::Channel object that the SFTP session is being processed by.



57
58
59
 
# File 'lib/net/sftp/session.rb', line 57

def channel
  @channel
end

#pending_requests ⇒ Object (readonly)

The hash of pending requests. Any requests that have been sent and which the server has not yet responded to will be represented here.



69
70
71
 
# File 'lib/net/sftp/session.rb', line 69

def pending_requests
  @pending_requests
end

#protocol ⇒ Object (readonly)

The protocol instance being used by this SFTP session. Useful for querying the protocol version in effect.



65
66
67
 
# File 'lib/net/sftp/session.rb', line 65

def protocol
  @protocol
end

#session ⇒ Object (readonly)

A reference to the Net::SSH session object that powers this SFTP session.



53
54
55
 
# File 'lib/net/sftp/session.rb', line 53

def session
  @session
end

#state ⇒ Object (readonly)

The state of the SFTP connection. It will be :opening, :subsystem, :init, :open, or :closed.



61
62
63
 
# File 'lib/net/sftp/session.rb', line 61

def state
  @state
end

Instance Method Details

#block(handle, offset, length, mask, &callback) ⇒ Object

:call-seq:

block(handle, offset, length, mask) -> request
block(handle, offset, length, mask) { |response| ... } -> request

Creates a byte-range lock on the file specified by the given handle. This operation is only available in SFTP protocol versions 6 and higher. The lock may be either mandatory or advisory.

The handle parameter is a file handle, as obtained by the #open method.

The offset and length parameters describe the location and size of the byte range.

The mask describes how the lock should be defined, and consists of some combination of the following bit masks:

  • 0x0040 - Read lock. The byte range may not be accessed for reading by via any other handle, though it may be written to.

  • 0x0080 - Write lock. The byte range may not be written to via any other handle, though it may be read from.

  • 0x0100 - Delete lock. No other handle may delete this file.

  • 0x0200 - Advisory lock. The server need not honor the lock instruction.

Once created, the lock may be removed via the #unblock method.



690
691
692
 
# File 'lib/net/sftp/session.rb', line 690

def block(handle, offset, length, mask, &callback)
  request :block, handle, offset, length, mask, &callback
end

#block!(handle, offset, length, mask, &callback) ⇒ Object

Identical to #block, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return the Response object for the request.



697
698
699
 
# File 'lib/net/sftp/session.rb', line 697

def block!(handle, offset, length, mask, &callback)
  wait_for(block(handle, offset, length, mask, &callback))
end

#close(handle, &callback) ⇒ Object

:call-seq:

close(handle) -> request
close(handle) { |response| ... } -> request

Closes an open handle, whether obtained via #open, or #opendir. Returns immediately with a Request object. If a block is given, it will be invoked when the server responds.

sftp.open("/path/to/file") do |response|
  raise "fail!" unless response.ok?
  sftp.close(response[:handle])
end
sftp.loop



206
207
208
 
# File 'lib/net/sftp/session.rb', line 206

def close(handle, &callback)
  request :close, handle, &callback
end

#close!(handle, &callback) ⇒ Object

Identical to #close, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it returns the Response object for this request.

sftp.close!(handle)



215
216
217
 
# File 'lib/net/sftp/session.rb', line 215

def close!(handle, &callback)
  wait_for(close(handle, &callback))
end

#close_channel ⇒ Object

Closes the SFTP connection, but not the SSH connection. Blocks until the session has terminated. Once the session has terminated, further operations on this object will result in errors. You can reopen the SFTP session via the #connect method.



726
727
728
729
730
 
# File 'lib/net/sftp/session.rb', line 726

def close_channel
  return unless open?
  channel.close
  loop { !closed? }
end

#closed? ⇒ Boolean

Returns true if the connection has been closed.

Returns:

  • (Boolean) 


738
739
740
 
# File 'lib/net/sftp/session.rb', line 738

def closed?
  state == :closed
end

#connect(&block) ⇒ Object

Attempts to establish an SFTP connection over the SSH session given when this object was instantiated. If the object is already open, this will simply execute the given block (if any), passing the SFTP session itself as argument. If the session is currently being opened, this will add the given block to the list of callbacks, to be executed when the session is fully open.

This method does not block, and will return immediately. If you pass a block to it, that block will be invoked when the connection has been fully established. Thus, you can do something like this:

sftp.connect do
  puts "open!"
end

If you just want to block until the connection is ready, see the #connect! method.



765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
 
# File 'lib/net/sftp/session.rb', line 765

def connect(&block)
  case state
  when :open
    block.call(self) if block
  when :closed
    @state = :opening
    @channel = session.open_channel(&method(:when_channel_confirmed))
    @packet_length = nil
    @protocol = nil
    @on_ready = Array(block)
  else # opening
    @on_ready << block if block
  end

  self
end

#connect!(&block) ⇒ Object

Same as the #connect method, but blocks until the SFTP connection has been fully initialized.



784
785
786
787
788
 
# File 'lib/net/sftp/session.rb', line 784

def connect!(&block)
  connect(&block)
  loop { opening? }
  self
end

#dir ⇒ Object

Returns a Net::SFTP::Operations::Dir instance, which can be used to conveniently iterate over and search directories on the remote server.

sftp.dir.glob("/base/path", "*/**/*.rb") do |entry|
  p entry.name
end

See Net::SFTP::Operations::Dir for a more detailed discussion of how to use this.



152
153
154
 
# File 'lib/net/sftp/session.rb', line 152

def dir
  @dir ||= Operations::Dir.new(self)
end

#download(remote, local, options = {}, &block) ⇒ Object

Initiates a download from remote to local, asynchronously. This method will return a new Net::SFTP::Operations::Download instance, and requires that the event loop be run in order for the download to progress. See Net::SFTP::Operations::Download for a full discussion of hos this method can be used.

download = sftp.download("/remote/path", "/local/path")
download.wait



114
115
116
 
# File 'lib/net/sftp/session.rb', line 114

def download(remote, local, options={}, &block)
  Operations::Download.new(self, local, remote, options, &block)
end

#download!(remote, local = nil, options = {}, &block) ⇒ Object

Identical to #download, but blocks until the download is complete. If local is omitted, downloads the file to an in-memory buffer and returns the result as a string; otherwise, returns the Net::SFTP::Operations::Download instance.



122
123
124
125
126
 
# File 'lib/net/sftp/session.rb', line 122

def download!(remote, local=nil, options={}, &block)
  destination = local || StringIO.new
  result = download(remote, destination, options, &block).wait
  local ? result : destination.string
end

#file ⇒ Object

Returns an Net::SFTP::Operations::FileFactory instance, which can be used to mimic synchronous, IO-like file operations on a remote file via SFTP.

sftp.file.open("/path/to/file") do |file|
  while line = file.gets
    puts line
  end
end

See Net::SFTP::Operations::FileFactory and Net::SFTP::Operations::File for more details.



139
140
141
 
# File 'lib/net/sftp/session.rb', line 139

def file
  @file ||= Operations::FileFactory.new(self)
end

#fsetstat(handle, attrs, &callback) ⇒ Object

The fsetstat method is identical to the #setstat method, with the exception that it takes a handle as the first parameter, such as would be obtained via the #open or #opendir methods. (See the #setstat method for full documentation.)



377
378
379
 
# File 'lib/net/sftp/session.rb', line 377

def fsetstat(handle, attrs, &callback)
  request :fsetstat, handle, attrs, &callback
end

#fsetstat!(handle, attrs, &callback) ⇒ Object

Identical to the #fsetstat method, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return the Response object for the request.

sftp.fsetstat!(handle, :permissions => 0644)



386
387
388
 
# File 'lib/net/sftp/session.rb', line 386

def fsetstat!(handle, attrs, &callback)
  wait_for(fsetstat(handle, attrs, &callback))
end

#fstat(handle, flags = nil, &callback) ⇒ Object

The fstat method is identical to the #stat and #lstat methods, with the exception that it takes a handle as the first parameter, such as would be obtained via the #open or #opendir methods. (See the #lstat method for full documentation).



326
327
328
 
# File 'lib/net/sftp/session.rb', line 326

def fstat(handle, flags=nil, &callback)
  request :fstat, handle, flags, &callback
end

#fstat!(handle, flags = nil, &callback) ⇒ Object

Identical to the #fstat method, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return the attribute object describing the path.

puts sftp.fstat!(handle).permissions



335
336
337
 
# File 'lib/net/sftp/session.rb', line 335

def fstat!(handle, flags=nil, &callback)
  wait_for(fstat(handle, flags, &callback), :attrs)
end

#link(new_link_path, existing_path, symlink = true, &callback) ⇒ Object

:call-seq:

link(new_link_path, existing_path, symlink=true) -> request
link(new_link_path, existing_path, symlink=true) { |response| ... } -> request

Attempts to create a link, either hard or symbolic. This operation is only available in SFTP protocol versions 6 and higher. If the symlink paramter is true, a symbolic link will be created, otherwise a hard link will be created. The link will be named new_link_path, and will point to the path existing_path.

sftp.link("/path/to/symlink", "/path/to/file", true).wait

Note that #link is only available for SFTP protocol 6 and higher. You can use #symlink for protocols 3 and higher.



653
654
655
 
# File 'lib/net/sftp/session.rb', line 653

def link(new_link_path, existing_path, symlink=true, &callback)
  request :link, new_link_path, existing_path, symlink, &callback
end

#link!(new_link_path, existing_path, symlink = true, &callback) ⇒ Object

Identical to #link, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return the Response object for the request.

sftp.link!("/path/to/symlink", "/path/to/file", true)



662
663
664
 
# File 'lib/net/sftp/session.rb', line 662

def link!(new_link_path, existing_path, symlink=true, &callback)
  wait_for(link(new_link_path, existing_path, symlink, &callback))
end

#loop(&block) ⇒ Object

Runs the SSH event loop while the given block returns true. This lets you set up a state machine and then “fire it off”. If you do not specify a block, the event loop will run for as long as there are any pending SFTP requests. This makes it easy to do thing like this:

sftp.remove("/path/to/file")
sftp.loop



799
800
801
802
 
# File 'lib/net/sftp/session.rb', line 799

def loop(&block)
  block ||= Proc.new { pending_requests.any? }
  session.loop(&block)
end

#loop_forever ⇒ Object 



790
 
# File 'lib/net/sftp/session.rb', line 790

alias :loop_forever :loop

#lstat(path, flags = nil, &callback) ⇒ Object

:call-seq:

lstat(path, flags=nil) -> request
lstat(path, flags=nil) { |response| ... } -> request

This method is identical to the #stat method, with the exception that it will not follow symbolic links (thus allowing you to stat the link itself, rather than what it refers to). The flags parameter is not used in SFTP protocol versions prior to 4, and will be ignored in those versions of the protocol that do not use it. For those that do, however, you may provide hints as to which file proprties you wish to query (e.g., if all you want is permissions, you could pass the Net::SFTP::Protocol::V04::Attributes::F_PERMISSIONS flag as the value for the flags parameter).

The method returns immediately with a Request object. If a block is given, it will be invoked when the server responds. The :attrs property of the response will contain an Attributes instance appropriate for the the protocol version (see Protocol::V01::Attributes, Protocol::V04::Attributes, and Protocol::V06::Attributes).

request = sftp.lstat("/path/to/file") do |response|
  raise "fail!" unless response.ok?
  puts "permissions: %04o" % response[:attrs].permissions
end
request.wait



309
310
311
 
# File 'lib/net/sftp/session.rb', line 309

def lstat(path, flags=nil, &callback)
  request :lstat, path, flags, &callback
end

#lstat!(path, flags = nil, &callback) ⇒ Object

Identical to the #lstat method, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return the attribute object describing the path.

puts sftp.lstat!("/path/to/file").permissions



318
319
320
 
# File 'lib/net/sftp/session.rb', line 318

def lstat!(path, flags=nil, &callback)
  wait_for(lstat(path, flags, &callback), :attrs)
end

#mkdir(path, attrs = {}, &callback) ⇒ Object

:call-seq:

mkdir(path, attrs={}) -> request
mkdir(path, attrs={}) { |response| ... } -> request

Creates the named directory on the remote server. If an attribute hash is given, it must map to the set of attributes supported by the version of the SFTP protocol in use. (See Protocol::V01::Attributes, Protocol::V04::Attributes, and Protocol::V06::Attributes.)

sftp.mkdir("/path/to/directory", :permissions => 0550).wait



487
488
489
 
# File 'lib/net/sftp/session.rb', line 487

def mkdir(path, attrs={}, &callback)
  request :mkdir, path, attrs, &callback
end

#mkdir!(path, attrs = {}, &callback) ⇒ Object

Identical to #mkdir, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return the Response object for the request.

sftp.mkdir!("/path/to/directory", :permissions => 0550)



496
497
498
 
# File 'lib/net/sftp/session.rb', line 496

def mkdir!(path, attrs={}, &callback)
  wait_for(mkdir(path, attrs, &callback))
end

#open(path, flags = "r", options = {}, &callback) ⇒ Object

:call-seq:

open(path, flags="r", options={}) -> request
open(path, flags="r", options={}) { |response| ... } -> request

Opens a file on the remote server. The flags parameter determines how the flag is open, and accepts the same format as IO#open (e.g., either a string like “r” or “w”, or a combination of the IO constants). The options parameter is a hash of attributes to be associated with the file, and varies greatly depending on the SFTP protocol version in use, but some (like :permissions) are always available.

Returns immediately with a Request object. If a block is given, it will be invoked when the server responds, with a Response object as the only parameter. The :handle property of the response is the handle of the opened file, and may be passed to other methods (like #close, #read, #write, and so forth).

sftp.open("/path/to/file") do |response|
  raise "fail!" unless response.ok?
  sftp.close(response[:handle])
end
sftp.loop



180
181
182
 
# File 'lib/net/sftp/session.rb', line 180

def open(path, flags="r", options={}, &callback)
  request :open, path, flags, options, &callback
end

#open!(path, flags = "r", options = {}, &callback) ⇒ Object

Identical to #open, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return the handle of the newly opened file.

handle = sftp.open!("/path/to/file")



189
190
191
 
# File 'lib/net/sftp/session.rb', line 189

def open!(path, flags="r", options={}, &callback)
  wait_for(open(path, flags, options, &callback), :handle)
end

#open? ⇒ Boolean

Returns true if the connection has been initialized.

Returns:

  • (Boolean) 


733
734
735
 
# File 'lib/net/sftp/session.rb', line 733

def open?
  state == :open
end

#opendir(path, &callback) ⇒ Object

:call-seq:

opendir(path) -> request
opendir(path) { |response| ... } -> request

Attempts to open a directory on the remote host for reading. Once the handle is obtained, directory entries may be retrieved using the #readdir method. The method returns immediately with a Request object. If a block is given, it will be invoked when the server responds.

sftp.opendir("/path/to/directory") do |response|
  raise "fail!" unless response.ok?
  sftp.close(response[:handle])
end
sftp.loop



404
405
406
 
# File 'lib/net/sftp/session.rb', line 404

def opendir(path, &callback)
  request :opendir, path, &callback
end

#opendir!(path, &callback) ⇒ Object

Identical to #opendir, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return a handle to the given path.

handle = sftp.opendir!("/path/to/directory")



413
414
415
 
# File 'lib/net/sftp/session.rb', line 413

def opendir!(path, &callback)
  wait_for(opendir(path, &callback), :handle)
end

#opening? ⇒ Boolean

Returns true if the connection is in the process of being initialized (e.g., it is not closed, but is not yet fully open).

Returns:

  • (Boolean) 


744
745
746
 
# File 'lib/net/sftp/session.rb', line 744

def opening?
  !(open? || closed?)
end

#read(handle, offset, length, &callback) ⇒ Object

:call-seq:

read(handle, offset, length) -> request
read(handle, offset, length) { |response| ... } -> request

Requests that length bytes, starting at offset bytes from the beginning of the file, be read from the file identified by handle. (The handle should be a value obtained via the #open method.) Returns immediately with a Request object. If a block is given, it will be invoked when the server responds.

The :data property of the response will contain the requested data, assuming the call was successful.

request = sftp.read(handle, 0, 1024) do |response|
  if response.eof?
    puts "end of file reached before reading any data"
  elsif !response.ok?
    puts "error (#{response})"
  else
    print(response[:data])
  end
end
request.wait

To read an entire file will usually require multiple calls to #read, unless you know in advance how large the file is.



245
246
247
 
# File 'lib/net/sftp/session.rb', line 245

def read(handle, offset, length, &callback)
  request :read, handle, offset, length, &callback
end

#read!(handle, offset, length, &callback) ⇒ Object

Identical to #read, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. If the end of the file was reached, nil will be returned. Otherwise, it returns the data that was read, as a String.

data = sftp.read!(handle, 0, 1024)



255
256
257
 
# File 'lib/net/sftp/session.rb', line 255

def read!(handle, offset, length, &callback)
  wait_for(read(handle, offset, length, &callback), :data)
end

#readdir(handle, &callback) ⇒ Object

:call-seq:

readdir(handle) -> request
raeddir(handle) { |response| ... } -> request

Reads a set of entries from the given directory handle (which must have been obtained via #opendir). If the response is EOF, then there are no more entries in the directory. Otherwise, the entries will be in the :names property of the response:

loop do
  request = sftp.readdir(handle).wait
  break if request.response.eof?
  raise "fail!" unless request.response.ok?
  request.response[:names].each do |entry|
     puts entry.name
  end
end

See also Protocol::V01::Name and Protocol::V04::Name for the specific properties of each individual entry (which vary based on the SFTP protocol version in use).



438
439
440
 
# File 'lib/net/sftp/session.rb', line 438

def readdir(handle, &callback)
  request :readdir, handle, &callback
end

#readdir!(handle, &callback) ⇒ Object

Identical to #readdir, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return nil if there were no more names to read, or an array of name entries.

while (entries = sftp.readdir!(handle)) do
  entries.each { |entry| puts(entry.name) }
end



450
451
452
 
# File 'lib/net/sftp/session.rb', line 450

def readdir!(handle, &callback)
  wait_for(readdir(handle, &callback), :names)
end

#readlink(path, &callback) ⇒ Object

:call-seq:

readlink(path) -> request
readlink(path) { |response| ... } -> request

Queries the server for the target of the specified symbolic link. This operation is only available in protocol versions 3 and higher. The response to this request will include a names property, a one-element array naming the target of the symlink.

request = sftp.readlink("/path/to/symlink").wait
puts request.response[:names].first.name



603
604
605
 
# File 'lib/net/sftp/session.rb', line 603

def readlink(path, &callback)
  request :readlink, path, &callback
end

#readlink!(path, &callback) ⇒ Object

Identical to #readlink, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return the Name object for the path that the symlink targets.

item = sftp.readlink!("/path/to/symlink")



612
613
614
 
# File 'lib/net/sftp/session.rb', line 612

def readlink!(path, &callback)
  wait_for(readlink(path, &callback), :names).first
end

#realpath(path, &callback) ⇒ Object

:call-seq:

realpath(path) -> request
realpath(path) { |response| ... } -> request

Tries to canonicalize the given path, turning any given path into an absolute path. This is primarily useful for converting a path with “..” or “.” segments into an identical path without those segments. The answer will be in the response’s :names attribute, as a one-element array.

request = sftp.realpath("/path/../to/../directory").wait
puts request[:names].first.name



533
534
535
 
# File 'lib/net/sftp/session.rb', line 533

def realpath(path, &callback)
  request :realpath, path, &callback
end

#realpath!(path, &callback) ⇒ Object

Identical to #realpath, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return a name object identifying the path.

puts(sftp.realpath!("/path/../to/../directory"))



542
543
544
 
# File 'lib/net/sftp/session.rb', line 542

def realpath!(path, &callback)
  wait_for(realpath(path, &callback), :names).first
end

#remove(filename, &callback) ⇒ Object

:call-seq:

remove(filename) -> request
remove(filename) { |response| ... } -> request

Attempts to remove the given file from the remote file system. Returns immediately with a Request object. If a block is given, the block will be invoked when the server responds, and will be passed a Response object.

sftp.remove("/path/to/file").wait



464
465
466
 
# File 'lib/net/sftp/session.rb', line 464

def remove(filename, &callback)
  request :remove, filename, &callback
end

#remove!(filename, &callback) ⇒ Object

Identical to #remove, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return the Response object for the request.

sftp.remove!("/path/to/file")



473
474
475
 
# File 'lib/net/sftp/session.rb', line 473

def remove!(filename, &callback)
  wait_for(remove(filename, &callback))
end

#rename(name, new_name, flags = nil, &callback) ⇒ Object

:call-seq:

rename(name, new_name, flags=nil) -> request
rename(name, new_name, flags=nil) { |response| ... } -> request

Renames the given file. This operation is only available in SFTP protocol versions two and higher. The flags parameter is ignored in versions prior to 5. In versions 5 and higher, the flags parameter can be used to specify how the rename should be performed (atomically, etc.).

The following flags are defined in protocol version 5:

  • 0x0001 - overwrite an existing file if the new name specifies a file that already exists.

  • 0x0002 - perform the rewrite atomically.

  • 0x0004 - allow the server to perform the rename as it prefers.



579
580
581
 
# File 'lib/net/sftp/session.rb', line 579

def rename(name, new_name, flags=nil, &callback)
  request :rename, name, new_name, flags, &callback
end

#rename!(name, new_name, flags = nil, &callback) ⇒ Object

Identical to #rename, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return the Response object for the request.

sftp.rename!("/path/to/old", "/path/to/new")



588
589
590
 
# File 'lib/net/sftp/session.rb', line 588

def rename!(name, new_name, flags=nil, &callback)
  wait_for(rename(name, new_name, flags, &callback))
end

#rmdir(path, &callback) ⇒ Object

:call-seq:

rmdir(path) -> request
rmdir(path) { |response| ... } -> request

Removes the named directory on the remote server. The directory must be empty before it can be removed.

sftp.rmdir("/path/to/directory").wait



508
509
510
 
# File 'lib/net/sftp/session.rb', line 508

def rmdir(path, &callback)
  request :rmdir, path, &callback
end

#rmdir!(path, &callback) ⇒ Object

Identical to #rmdir, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return the Response object for the request.

sftp.rmdir!("/path/to/directory")



517
518
519
 
# File 'lib/net/sftp/session.rb', line 517

def rmdir!(path, &callback)
  wait_for(rmdir(path, &callback))
end

#send_packet(type, *args) ⇒ Object

Formats, constructs, and sends an SFTP packet of the given type and with the given data. This does not block, but merely enqueues the packet for sending and returns.

You should probably use the operation methods, rather than building and sending the packet directly. (See #open, #close, etc.)



810
811
812
813
814
 
# File 'lib/net/sftp/session.rb', line 810

def send_packet(type, *args)
  data = Net::SSH::Buffer.from(*args)
  msg = Net::SSH::Buffer.from(:long, data.length+1, :byte, type, :raw, data)
  channel.send_data(msg.to_s)
end

#setstat(path, attrs, &callback) ⇒ Object

:call-seq:

setstat(path, attrs) -> request
setstat(path, attrs) { |response| ... } -> request

This method may be used to set file metadata (such as permissions, or user/group information) on a remote file. The exact metadata that may be tweaked is dependent on the SFTP protocol version in use, but in general you may set at least the permissions, user, and group. (See Protocol::V01::Attributes, Protocol::V04::Attributes, and Protocol::V06::Attributes for the full lists of attributes that may be set for the different protocols.)

The attrs parameter is a hash, where the keys are symbols identifying the attributes to set.

The method returns immediately with a Request object. If a block is given, it will be invoked when the server responds.

request = sftp.setstat("/path/to/file", :permissions => 0644)
request.wait
puts "success: #{request.response.ok?}"



360
361
362
 
# File 'lib/net/sftp/session.rb', line 360

def setstat(path, attrs, &callback)
  request :setstat, path, attrs, &callback
end

#setstat!(path, attrs, &callback) ⇒ Object

Identical to the #setstat method, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return the Response object for the request.

sftp.setstat!("/path/to/file", :permissions => 0644)



369
370
371
 
# File 'lib/net/sftp/session.rb', line 369

def setstat!(path, attrs, &callback)
  wait_for(setstat(path, attrs, &callback))
end

#stat(path, flags = nil, &callback) ⇒ Object

Identical to the #lstat method, except that it follows symlinks (e.g., if you give it the path to a symlink, it will stat the target of the symlink rather than the symlink itself). See the #lstat method for full documentation.



550
551
552
 
# File 'lib/net/sftp/session.rb', line 550

def stat(path, flags=nil, &callback)
  request :stat, path, flags, &callback
end

#stat!(path, flags = nil, &callback) ⇒ Object

Identical to #stat, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return an attribute object for the named path.

attrs = sftp.stat!("/path/to/file")



559
560
561
 
# File 'lib/net/sftp/session.rb', line 559

def stat!(path, flags=nil, &callback)
  wait_for(stat(path, flags, &callback), :attrs)
end

#symlink(path, target, &callback) ⇒ Object

:call-seq:

symlink(path, target) -> request
symlink(path, target) { |response| ... } -> request

Attempts to create a symlink to path at target. This operation is only available in protocol versions 3, 4, and 5, but the Net::SFTP library mimics the symlink behavior in protocol version 6 using the #link method, so it is safe to use this method in protocol version 6.

sftp.symlink("/path/to/file", "/path/to/symlink").wait



626
627
628
 
# File 'lib/net/sftp/session.rb', line 626

def symlink(path, target, &callback)
  request :symlink, path, target, &callback
end

#symlink!(path, target, &callback) ⇒ Object

Identical to #symlink, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return the Response object for the request.

sftp.symlink!("/path/to/file", "/path/to/symlink")



635
636
637
 
# File 'lib/net/sftp/session.rb', line 635

def symlink!(path, target, &callback)
  wait_for(symlink(path, target, &callback))
end

#unblock(handle, offset, length, &callback) ⇒ Object

:call-seq:

unblock(handle, offset, length) -> request
unblock(handle, offset, length) { |response| ... } -> request

Removes a previously created byte-range lock. This operation is only available in protocol versions 6 and higher. The offset and length parameters must exactly match those that were given to #block when the lock was acquired.



709
710
711
 
# File 'lib/net/sftp/session.rb', line 709

def unblock(handle, offset, length, &callback)
  request :unblock, handle, offset, length, &callback
end

#unblock!(handle, offset, length, &callback) ⇒ Object

Identical to #unblock, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful. Otherwise, it will return the Response object for the request.



716
717
718
 
# File 'lib/net/sftp/session.rb', line 716

def unblock!(handle, offset, length, &callback)
  wait_for(unblock(handle, offset, length, &callback))
end

#upload(local, remote, options = {}, &block) ⇒ Object

Initiates an upload from local to remote, asynchronously. This method will return a new Net::SFTP::Operations::Upload instance, and requires the event loop to be run in order for the upload to progress. See Net::SFTP::Operations::Upload for a full discussion of how this method can be used.

uploader = sftp.upload("/local/path", "/remote/path")
uploader.wait



97
98
99
 
# File 'lib/net/sftp/session.rb', line 97

def upload(local, remote, options={}, &block)
  Operations::Upload.new(self, local, remote, options, &block)
end

#upload!(local, remote, options = {}, &block) ⇒ Object

Identical to #upload, but blocks until the upload is complete.



102
103
104
 
# File 'lib/net/sftp/session.rb', line 102

def upload!(local, remote, options={}, &block)
  upload(local, remote, options, &block).wait
end

#write(handle, offset, data, &callback) ⇒ Object

:call-seq:

write(handle, offset, data) -> request
write(handle, offset, data) { |response| ... } -> request

Requests that data be written to the file identified by handle, starting at offset bytes from the start of the file. The file must have been opened for writing via #open. Returns immediately with a Request object. If a block is given, it will be invoked when the server responds.

request = sftp.write(handle, 0, "hello, world!\n")
request.wait



271
272
273
 
# File 'lib/net/sftp/session.rb', line 271

def write(handle, offset, data, &callback)
  request :write, handle, offset, data, &callback
end

#write!(handle, offset, data, &callback) ⇒ Object

Identical to #write, but blocks until the server responds. It will raise a StatusException if the request was unsuccessful, or the end of the file was reached. Otherwise, it returns the Response object for this request.

sftp.write!(handle, 0, "hello, world!\n")



280
281
282
 
# File 'lib/net/sftp/session.rb', line 280

def write!(handle, offset, data, &callback)
  wait_for(write(handle, offset, data, &callback))
end