Class: Google::Api::Distribution

Inherits:
Object
  • Object
show all
Extended by:
Protobuf::MessageExts::ClassMethods
Includes:
Protobuf::MessageExts
Defined in:
proto_docs/google/api/distribution.rb

Overview

Distribution contains summary statistics for a population of values. It optionally contains a histogram representing the distribution of those values across a set of buckets.

The summary statistics are the count, mean, sum of the squared deviation from the mean, the minimum, and the maximum of the set of population of values. The histogram is based on a sequence of buckets and gives a count of values that fall into each bucket. The boundaries of the buckets are given either explicitly or by formulas for buckets of fixed or exponentially increasing widths.

Although it is not forbidden, it is generally a bad idea to include non-finite values (infinities or NaNs) in the population of values, as this will render the mean and sum_of_squared_deviation fields meaningless.

Defined Under Namespace

Classes: BucketOptions, Exemplar, Range

Instance Attribute Summary collapse

Instance Attribute Details

#bucket_counts ⇒ ::Array<::Integer>

Returns The number of values in each bucket of the histogram, as described in bucket_options. If the distribution does not have a histogram, then omit this field. If there is a histogram, then the sum of the values in bucket_counts must equal the value in the count field of the distribution.

If present, bucket_counts should contain N values, where N is the number of buckets specified in bucket_options. If you supply fewer than N values, the remaining values are assumed to be 0.

The order of the values in bucket_counts follows the bucket numbering schemes described for the three bucket types. The first value must be the count for the underflow bucket (number 0). The next N-2 values are the counts for the finite buckets (number 1 through N-2). The N'th value in bucket_counts is the count for the overflow bucket (number N-1).

Returns:

  • (::Array<::Integer>) —

    The number of values in each bucket of the histogram, as described in bucket_options. If the distribution does not have a histogram, then omit this field. If there is a histogram, then the sum of the values in bucket_counts must equal the value in the count field of the distribution.

    If present, bucket_counts should contain N values, where N is the number of buckets specified in bucket_options. If you supply fewer than N values, the remaining values are assumed to be 0.

    The order of the values in bucket_counts follows the bucket numbering schemes described for the three bucket types. The first value must be the count for the underflow bucket (number 0). The next N-2 values are the counts for the finite buckets (number 1 through N-2). The N'th value in bucket_counts is the count for the overflow bucket (number N-1).



84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
 
# File 'proto_docs/google/api/distribution.rb', line 84

class Distribution
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods

  # The range of the population values.
  # @!attribute [rw] min
  #   @return [::Float]
  #     The minimum of the population values.
  # @!attribute [rw] max
  #   @return [::Float]
  #     The maximum of the population values.
  class Range
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods
  end

  # `BucketOptions` describes the bucket boundaries used to create a histogram
  # for the distribution. The buckets can be in a linear sequence, an
  # exponential sequence, or each bucket can be specified explicitly.
  # `BucketOptions` does not include the number of values in each bucket.
  #
  # A bucket has an inclusive lower bound and exclusive upper bound for the
  # values that are counted for that bucket. The upper bound of a bucket must
  # be strictly greater than the lower bound. The sequence of N buckets for a
  # distribution consists of an underflow bucket (number 0), zero or more
  # finite buckets (number 1 through N - 2) and an overflow bucket (number N -
  # 1). The buckets are contiguous: the lower bound of bucket i (i > 0) is the
  # same as the upper bound of bucket i - 1. The buckets span the whole range
  # of finite values: lower bound of the underflow bucket is -infinity and the
  # upper bound of the overflow bucket is +infinity. The finite buckets are
  # so-called because both bounds are finite.
  # @!attribute [rw] linear_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Linear]
  #     The linear bucket.
  # @!attribute [rw] exponential_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Exponential]
  #     The exponential buckets.
  # @!attribute [rw] explicit_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Explicit]
  #     The explicit buckets.
  class BucketOptions
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods

    # Specifies a linear sequence of buckets that all have the same width
    # (except overflow and underflow). Each bucket represents a constant
    # absolute uncertainty on the specific value in the bucket.
    #
    # There are `num_finite_buckets + 2` (= N) buckets. Bucket `i` has the
    # following boundaries:
    #
    #    Upper bound (0 <= i < N-1):     offset + (width * i).
    #    Lower bound (1 <= i < N):       offset + (width * (i - 1)).
    # @!attribute [rw] num_finite_buckets
    #   @return [::Integer]
    #     Must be greater than 0.
    # @!attribute [rw] width
    #   @return [::Float]
    #     Must be greater than 0.
    # @!attribute [rw] offset
    #   @return [::Float]
    #     Lower bound of the first bucket.
    class Linear
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end

    # Specifies an exponential sequence of buckets that have a width that is
    # proportional to the value of the lower bound. Each bucket represents a
    # constant relative uncertainty on a specific value in the bucket.
    #
    # There are `num_finite_buckets + 2` (= N) buckets. Bucket `i` has the
    # following boundaries:
    #
    #    Upper bound (0 <= i < N-1):     scale * (growth_factor ^ i).
    #    Lower bound (1 <= i < N):       scale * (growth_factor ^ (i - 1)).
    # @!attribute [rw] num_finite_buckets
    #   @return [::Integer]
    #     Must be greater than 0.
    # @!attribute [rw] growth_factor
    #   @return [::Float]
    #     Must be greater than 1.
    # @!attribute [rw] scale
    #   @return [::Float]
    #     Must be greater than 0.
    class Exponential
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end

    # Specifies a set of buckets with arbitrary widths.
    #
    # There are `size(bounds) + 1` (= N) buckets. Bucket `i` has the following
    # boundaries:
    #
    #    Upper bound (0 <= i < N-1):     bounds[i]
    #    Lower bound (1 <= i < N);       bounds[i - 1]
    #
    # The `bounds` field must contain at least one element. If `bounds` has
    # only one element, then there are no finite buckets, and that single
    # element is the common boundary of the overflow and underflow buckets.
    # @!attribute [rw] bounds
    #   @return [::Array<::Float>]
    #     The values must be monotonically increasing.
    class Explicit
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end
  end

  # Exemplars are example points that may be used to annotate aggregated
  # distribution values. They are metadata that gives information about a
  # particular value added to a Distribution bucket, such as a trace ID that
  # was active when a value was added. They may contain further information,
  # such as a example values and timestamps, origin, etc.
  # @!attribute [rw] value
  #   @return [::Float]
  #     Value of the exemplar point. This value determines to which bucket the
  #     exemplar belongs.
  # @!attribute [rw] timestamp
  #   @return [::Google::Protobuf::Timestamp]
  #     The observation (sampling) time of the above value.
  # @!attribute [rw] attachments
  #   @return [::Array<::Google::Protobuf::Any>]
  #     Contextual information about the example value. Examples are:
  #
  #       Trace ID: type.googleapis.com/google.devtools.cloudtrace.v1.Trace
  #
  #       Literal string: type.googleapis.com/google.protobuf.StringValue
  #
  #       Labels dropped during aggregation:
  #         type.googleapis.com/google.monitoring.v3.DroppedLabels
  #
  #     There may be only a single attachment of any given message type in a
  #     single exemplar, and this is enforced by the system.
  class Exemplar
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods
  end
end

#bucket_options ⇒ ::Google::Api::Distribution::BucketOptions

Returns Defines the histogram bucket boundaries. If the distribution does not contain a histogram, then omit this field.

Returns:



84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
 
# File 'proto_docs/google/api/distribution.rb', line 84

class Distribution
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods

  # The range of the population values.
  # @!attribute [rw] min
  #   @return [::Float]
  #     The minimum of the population values.
  # @!attribute [rw] max
  #   @return [::Float]
  #     The maximum of the population values.
  class Range
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods
  end

  # `BucketOptions` describes the bucket boundaries used to create a histogram
  # for the distribution. The buckets can be in a linear sequence, an
  # exponential sequence, or each bucket can be specified explicitly.
  # `BucketOptions` does not include the number of values in each bucket.
  #
  # A bucket has an inclusive lower bound and exclusive upper bound for the
  # values that are counted for that bucket. The upper bound of a bucket must
  # be strictly greater than the lower bound. The sequence of N buckets for a
  # distribution consists of an underflow bucket (number 0), zero or more
  # finite buckets (number 1 through N - 2) and an overflow bucket (number N -
  # 1). The buckets are contiguous: the lower bound of bucket i (i > 0) is the
  # same as the upper bound of bucket i - 1. The buckets span the whole range
  # of finite values: lower bound of the underflow bucket is -infinity and the
  # upper bound of the overflow bucket is +infinity. The finite buckets are
  # so-called because both bounds are finite.
  # @!attribute [rw] linear_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Linear]
  #     The linear bucket.
  # @!attribute [rw] exponential_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Exponential]
  #     The exponential buckets.
  # @!attribute [rw] explicit_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Explicit]
  #     The explicit buckets.
  class BucketOptions
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods

    # Specifies a linear sequence of buckets that all have the same width
    # (except overflow and underflow). Each bucket represents a constant
    # absolute uncertainty on the specific value in the bucket.
    #
    # There are `num_finite_buckets + 2` (= N) buckets. Bucket `i` has the
    # following boundaries:
    #
    #    Upper bound (0 <= i < N-1):     offset + (width * i).
    #    Lower bound (1 <= i < N):       offset + (width * (i - 1)).
    # @!attribute [rw] num_finite_buckets
    #   @return [::Integer]
    #     Must be greater than 0.
    # @!attribute [rw] width
    #   @return [::Float]
    #     Must be greater than 0.
    # @!attribute [rw] offset
    #   @return [::Float]
    #     Lower bound of the first bucket.
    class Linear
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end

    # Specifies an exponential sequence of buckets that have a width that is
    # proportional to the value of the lower bound. Each bucket represents a
    # constant relative uncertainty on a specific value in the bucket.
    #
    # There are `num_finite_buckets + 2` (= N) buckets. Bucket `i` has the
    # following boundaries:
    #
    #    Upper bound (0 <= i < N-1):     scale * (growth_factor ^ i).
    #    Lower bound (1 <= i < N):       scale * (growth_factor ^ (i - 1)).
    # @!attribute [rw] num_finite_buckets
    #   @return [::Integer]
    #     Must be greater than 0.
    # @!attribute [rw] growth_factor
    #   @return [::Float]
    #     Must be greater than 1.
    # @!attribute [rw] scale
    #   @return [::Float]
    #     Must be greater than 0.
    class Exponential
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end

    # Specifies a set of buckets with arbitrary widths.
    #
    # There are `size(bounds) + 1` (= N) buckets. Bucket `i` has the following
    # boundaries:
    #
    #    Upper bound (0 <= i < N-1):     bounds[i]
    #    Lower bound (1 <= i < N);       bounds[i - 1]
    #
    # The `bounds` field must contain at least one element. If `bounds` has
    # only one element, then there are no finite buckets, and that single
    # element is the common boundary of the overflow and underflow buckets.
    # @!attribute [rw] bounds
    #   @return [::Array<::Float>]
    #     The values must be monotonically increasing.
    class Explicit
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end
  end

  # Exemplars are example points that may be used to annotate aggregated
  # distribution values. They are metadata that gives information about a
  # particular value added to a Distribution bucket, such as a trace ID that
  # was active when a value was added. They may contain further information,
  # such as a example values and timestamps, origin, etc.
  # @!attribute [rw] value
  #   @return [::Float]
  #     Value of the exemplar point. This value determines to which bucket the
  #     exemplar belongs.
  # @!attribute [rw] timestamp
  #   @return [::Google::Protobuf::Timestamp]
  #     The observation (sampling) time of the above value.
  # @!attribute [rw] attachments
  #   @return [::Array<::Google::Protobuf::Any>]
  #     Contextual information about the example value. Examples are:
  #
  #       Trace ID: type.googleapis.com/google.devtools.cloudtrace.v1.Trace
  #
  #       Literal string: type.googleapis.com/google.protobuf.StringValue
  #
  #       Labels dropped during aggregation:
  #         type.googleapis.com/google.monitoring.v3.DroppedLabels
  #
  #     There may be only a single attachment of any given message type in a
  #     single exemplar, and this is enforced by the system.
  class Exemplar
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods
  end
end

#count ⇒ ::Integer

Returns The number of values in the population. Must be non-negative. This value must equal the sum of the values in bucket_counts if a histogram is provided.

Returns:

  • (::Integer) —

    The number of values in the population. Must be non-negative. This value must equal the sum of the values in bucket_counts if a histogram is provided.



84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
 
# File 'proto_docs/google/api/distribution.rb', line 84

class Distribution
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods

  # The range of the population values.
  # @!attribute [rw] min
  #   @return [::Float]
  #     The minimum of the population values.
  # @!attribute [rw] max
  #   @return [::Float]
  #     The maximum of the population values.
  class Range
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods
  end

  # `BucketOptions` describes the bucket boundaries used to create a histogram
  # for the distribution. The buckets can be in a linear sequence, an
  # exponential sequence, or each bucket can be specified explicitly.
  # `BucketOptions` does not include the number of values in each bucket.
  #
  # A bucket has an inclusive lower bound and exclusive upper bound for the
  # values that are counted for that bucket. The upper bound of a bucket must
  # be strictly greater than the lower bound. The sequence of N buckets for a
  # distribution consists of an underflow bucket (number 0), zero or more
  # finite buckets (number 1 through N - 2) and an overflow bucket (number N -
  # 1). The buckets are contiguous: the lower bound of bucket i (i > 0) is the
  # same as the upper bound of bucket i - 1. The buckets span the whole range
  # of finite values: lower bound of the underflow bucket is -infinity and the
  # upper bound of the overflow bucket is +infinity. The finite buckets are
  # so-called because both bounds are finite.
  # @!attribute [rw] linear_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Linear]
  #     The linear bucket.
  # @!attribute [rw] exponential_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Exponential]
  #     The exponential buckets.
  # @!attribute [rw] explicit_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Explicit]
  #     The explicit buckets.
  class BucketOptions
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods

    # Specifies a linear sequence of buckets that all have the same width
    # (except overflow and underflow). Each bucket represents a constant
    # absolute uncertainty on the specific value in the bucket.
    #
    # There are `num_finite_buckets + 2` (= N) buckets. Bucket `i` has the
    # following boundaries:
    #
    #    Upper bound (0 <= i < N-1):     offset + (width * i).
    #    Lower bound (1 <= i < N):       offset + (width * (i - 1)).
    # @!attribute [rw] num_finite_buckets
    #   @return [::Integer]
    #     Must be greater than 0.
    # @!attribute [rw] width
    #   @return [::Float]
    #     Must be greater than 0.
    # @!attribute [rw] offset
    #   @return [::Float]
    #     Lower bound of the first bucket.
    class Linear
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end

    # Specifies an exponential sequence of buckets that have a width that is
    # proportional to the value of the lower bound. Each bucket represents a
    # constant relative uncertainty on a specific value in the bucket.
    #
    # There are `num_finite_buckets + 2` (= N) buckets. Bucket `i` has the
    # following boundaries:
    #
    #    Upper bound (0 <= i < N-1):     scale * (growth_factor ^ i).
    #    Lower bound (1 <= i < N):       scale * (growth_factor ^ (i - 1)).
    # @!attribute [rw] num_finite_buckets
    #   @return [::Integer]
    #     Must be greater than 0.
    # @!attribute [rw] growth_factor
    #   @return [::Float]
    #     Must be greater than 1.
    # @!attribute [rw] scale
    #   @return [::Float]
    #     Must be greater than 0.
    class Exponential
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end

    # Specifies a set of buckets with arbitrary widths.
    #
    # There are `size(bounds) + 1` (= N) buckets. Bucket `i` has the following
    # boundaries:
    #
    #    Upper bound (0 <= i < N-1):     bounds[i]
    #    Lower bound (1 <= i < N);       bounds[i - 1]
    #
    # The `bounds` field must contain at least one element. If `bounds` has
    # only one element, then there are no finite buckets, and that single
    # element is the common boundary of the overflow and underflow buckets.
    # @!attribute [rw] bounds
    #   @return [::Array<::Float>]
    #     The values must be monotonically increasing.
    class Explicit
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end
  end

  # Exemplars are example points that may be used to annotate aggregated
  # distribution values. They are metadata that gives information about a
  # particular value added to a Distribution bucket, such as a trace ID that
  # was active when a value was added. They may contain further information,
  # such as a example values and timestamps, origin, etc.
  # @!attribute [rw] value
  #   @return [::Float]
  #     Value of the exemplar point. This value determines to which bucket the
  #     exemplar belongs.
  # @!attribute [rw] timestamp
  #   @return [::Google::Protobuf::Timestamp]
  #     The observation (sampling) time of the above value.
  # @!attribute [rw] attachments
  #   @return [::Array<::Google::Protobuf::Any>]
  #     Contextual information about the example value. Examples are:
  #
  #       Trace ID: type.googleapis.com/google.devtools.cloudtrace.v1.Trace
  #
  #       Literal string: type.googleapis.com/google.protobuf.StringValue
  #
  #       Labels dropped during aggregation:
  #         type.googleapis.com/google.monitoring.v3.DroppedLabels
  #
  #     There may be only a single attachment of any given message type in a
  #     single exemplar, and this is enforced by the system.
  class Exemplar
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods
  end
end

#exemplars ⇒ ::Array<::Google::Api::Distribution::Exemplar>

Returns Must be in increasing order of value field.

Returns:



84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
 
# File 'proto_docs/google/api/distribution.rb', line 84

class Distribution
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods

  # The range of the population values.
  # @!attribute [rw] min
  #   @return [::Float]
  #     The minimum of the population values.
  # @!attribute [rw] max
  #   @return [::Float]
  #     The maximum of the population values.
  class Range
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods
  end

  # `BucketOptions` describes the bucket boundaries used to create a histogram
  # for the distribution. The buckets can be in a linear sequence, an
  # exponential sequence, or each bucket can be specified explicitly.
  # `BucketOptions` does not include the number of values in each bucket.
  #
  # A bucket has an inclusive lower bound and exclusive upper bound for the
  # values that are counted for that bucket. The upper bound of a bucket must
  # be strictly greater than the lower bound. The sequence of N buckets for a
  # distribution consists of an underflow bucket (number 0), zero or more
  # finite buckets (number 1 through N - 2) and an overflow bucket (number N -
  # 1). The buckets are contiguous: the lower bound of bucket i (i > 0) is the
  # same as the upper bound of bucket i - 1. The buckets span the whole range
  # of finite values: lower bound of the underflow bucket is -infinity and the
  # upper bound of the overflow bucket is +infinity. The finite buckets are
  # so-called because both bounds are finite.
  # @!attribute [rw] linear_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Linear]
  #     The linear bucket.
  # @!attribute [rw] exponential_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Exponential]
  #     The exponential buckets.
  # @!attribute [rw] explicit_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Explicit]
  #     The explicit buckets.
  class BucketOptions
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods

    # Specifies a linear sequence of buckets that all have the same width
    # (except overflow and underflow). Each bucket represents a constant
    # absolute uncertainty on the specific value in the bucket.
    #
    # There are `num_finite_buckets + 2` (= N) buckets. Bucket `i` has the
    # following boundaries:
    #
    #    Upper bound (0 <= i < N-1):     offset + (width * i).
    #    Lower bound (1 <= i < N):       offset + (width * (i - 1)).
    # @!attribute [rw] num_finite_buckets
    #   @return [::Integer]
    #     Must be greater than 0.
    # @!attribute [rw] width
    #   @return [::Float]
    #     Must be greater than 0.
    # @!attribute [rw] offset
    #   @return [::Float]
    #     Lower bound of the first bucket.
    class Linear
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end

    # Specifies an exponential sequence of buckets that have a width that is
    # proportional to the value of the lower bound. Each bucket represents a
    # constant relative uncertainty on a specific value in the bucket.
    #
    # There are `num_finite_buckets + 2` (= N) buckets. Bucket `i` has the
    # following boundaries:
    #
    #    Upper bound (0 <= i < N-1):     scale * (growth_factor ^ i).
    #    Lower bound (1 <= i < N):       scale * (growth_factor ^ (i - 1)).
    # @!attribute [rw] num_finite_buckets
    #   @return [::Integer]
    #     Must be greater than 0.
    # @!attribute [rw] growth_factor
    #   @return [::Float]
    #     Must be greater than 1.
    # @!attribute [rw] scale
    #   @return [::Float]
    #     Must be greater than 0.
    class Exponential
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end

    # Specifies a set of buckets with arbitrary widths.
    #
    # There are `size(bounds) + 1` (= N) buckets. Bucket `i` has the following
    # boundaries:
    #
    #    Upper bound (0 <= i < N-1):     bounds[i]
    #    Lower bound (1 <= i < N);       bounds[i - 1]
    #
    # The `bounds` field must contain at least one element. If `bounds` has
    # only one element, then there are no finite buckets, and that single
    # element is the common boundary of the overflow and underflow buckets.
    # @!attribute [rw] bounds
    #   @return [::Array<::Float>]
    #     The values must be monotonically increasing.
    class Explicit
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end
  end

  # Exemplars are example points that may be used to annotate aggregated
  # distribution values. They are metadata that gives information about a
  # particular value added to a Distribution bucket, such as a trace ID that
  # was active when a value was added. They may contain further information,
  # such as a example values and timestamps, origin, etc.
  # @!attribute [rw] value
  #   @return [::Float]
  #     Value of the exemplar point. This value determines to which bucket the
  #     exemplar belongs.
  # @!attribute [rw] timestamp
  #   @return [::Google::Protobuf::Timestamp]
  #     The observation (sampling) time of the above value.
  # @!attribute [rw] attachments
  #   @return [::Array<::Google::Protobuf::Any>]
  #     Contextual information about the example value. Examples are:
  #
  #       Trace ID: type.googleapis.com/google.devtools.cloudtrace.v1.Trace
  #
  #       Literal string: type.googleapis.com/google.protobuf.StringValue
  #
  #       Labels dropped during aggregation:
  #         type.googleapis.com/google.monitoring.v3.DroppedLabels
  #
  #     There may be only a single attachment of any given message type in a
  #     single exemplar, and this is enforced by the system.
  class Exemplar
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods
  end
end

#mean ⇒ ::Float

Returns The arithmetic mean of the values in the population. If count is zero then this field must be zero.

Returns:

  • (::Float) —

    The arithmetic mean of the values in the population. If count is zero then this field must be zero.



84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
 
# File 'proto_docs/google/api/distribution.rb', line 84

class Distribution
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods

  # The range of the population values.
  # @!attribute [rw] min
  #   @return [::Float]
  #     The minimum of the population values.
  # @!attribute [rw] max
  #   @return [::Float]
  #     The maximum of the population values.
  class Range
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods
  end

  # `BucketOptions` describes the bucket boundaries used to create a histogram
  # for the distribution. The buckets can be in a linear sequence, an
  # exponential sequence, or each bucket can be specified explicitly.
  # `BucketOptions` does not include the number of values in each bucket.
  #
  # A bucket has an inclusive lower bound and exclusive upper bound for the
  # values that are counted for that bucket. The upper bound of a bucket must
  # be strictly greater than the lower bound. The sequence of N buckets for a
  # distribution consists of an underflow bucket (number 0), zero or more
  # finite buckets (number 1 through N - 2) and an overflow bucket (number N -
  # 1). The buckets are contiguous: the lower bound of bucket i (i > 0) is the
  # same as the upper bound of bucket i - 1. The buckets span the whole range
  # of finite values: lower bound of the underflow bucket is -infinity and the
  # upper bound of the overflow bucket is +infinity. The finite buckets are
  # so-called because both bounds are finite.
  # @!attribute [rw] linear_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Linear]
  #     The linear bucket.
  # @!attribute [rw] exponential_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Exponential]
  #     The exponential buckets.
  # @!attribute [rw] explicit_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Explicit]
  #     The explicit buckets.
  class BucketOptions
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods

    # Specifies a linear sequence of buckets that all have the same width
    # (except overflow and underflow). Each bucket represents a constant
    # absolute uncertainty on the specific value in the bucket.
    #
    # There are `num_finite_buckets + 2` (= N) buckets. Bucket `i` has the
    # following boundaries:
    #
    #    Upper bound (0 <= i < N-1):     offset + (width * i).
    #    Lower bound (1 <= i < N):       offset + (width * (i - 1)).
    # @!attribute [rw] num_finite_buckets
    #   @return [::Integer]
    #     Must be greater than 0.
    # @!attribute [rw] width
    #   @return [::Float]
    #     Must be greater than 0.
    # @!attribute [rw] offset
    #   @return [::Float]
    #     Lower bound of the first bucket.
    class Linear
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end

    # Specifies an exponential sequence of buckets that have a width that is
    # proportional to the value of the lower bound. Each bucket represents a
    # constant relative uncertainty on a specific value in the bucket.
    #
    # There are `num_finite_buckets + 2` (= N) buckets. Bucket `i` has the
    # following boundaries:
    #
    #    Upper bound (0 <= i < N-1):     scale * (growth_factor ^ i).
    #    Lower bound (1 <= i < N):       scale * (growth_factor ^ (i - 1)).
    # @!attribute [rw] num_finite_buckets
    #   @return [::Integer]
    #     Must be greater than 0.
    # @!attribute [rw] growth_factor
    #   @return [::Float]
    #     Must be greater than 1.
    # @!attribute [rw] scale
    #   @return [::Float]
    #     Must be greater than 0.
    class Exponential
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end

    # Specifies a set of buckets with arbitrary widths.
    #
    # There are `size(bounds) + 1` (= N) buckets. Bucket `i` has the following
    # boundaries:
    #
    #    Upper bound (0 <= i < N-1):     bounds[i]
    #    Lower bound (1 <= i < N);       bounds[i - 1]
    #
    # The `bounds` field must contain at least one element. If `bounds` has
    # only one element, then there are no finite buckets, and that single
    # element is the common boundary of the overflow and underflow buckets.
    # @!attribute [rw] bounds
    #   @return [::Array<::Float>]
    #     The values must be monotonically increasing.
    class Explicit
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end
  end

  # Exemplars are example points that may be used to annotate aggregated
  # distribution values. They are metadata that gives information about a
  # particular value added to a Distribution bucket, such as a trace ID that
  # was active when a value was added. They may contain further information,
  # such as a example values and timestamps, origin, etc.
  # @!attribute [rw] value
  #   @return [::Float]
  #     Value of the exemplar point. This value determines to which bucket the
  #     exemplar belongs.
  # @!attribute [rw] timestamp
  #   @return [::Google::Protobuf::Timestamp]
  #     The observation (sampling) time of the above value.
  # @!attribute [rw] attachments
  #   @return [::Array<::Google::Protobuf::Any>]
  #     Contextual information about the example value. Examples are:
  #
  #       Trace ID: type.googleapis.com/google.devtools.cloudtrace.v1.Trace
  #
  #       Literal string: type.googleapis.com/google.protobuf.StringValue
  #
  #       Labels dropped during aggregation:
  #         type.googleapis.com/google.monitoring.v3.DroppedLabels
  #
  #     There may be only a single attachment of any given message type in a
  #     single exemplar, and this is enforced by the system.
  class Exemplar
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods
  end
end

#range ⇒ ::Google::Api::Distribution::Range

Returns If specified, contains the range of the population values. The field must not be present if the count is zero.

Returns:



84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
 
# File 'proto_docs/google/api/distribution.rb', line 84

class Distribution
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods

  # The range of the population values.
  # @!attribute [rw] min
  #   @return [::Float]
  #     The minimum of the population values.
  # @!attribute [rw] max
  #   @return [::Float]
  #     The maximum of the population values.
  class Range
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods
  end

  # `BucketOptions` describes the bucket boundaries used to create a histogram
  # for the distribution. The buckets can be in a linear sequence, an
  # exponential sequence, or each bucket can be specified explicitly.
  # `BucketOptions` does not include the number of values in each bucket.
  #
  # A bucket has an inclusive lower bound and exclusive upper bound for the
  # values that are counted for that bucket. The upper bound of a bucket must
  # be strictly greater than the lower bound. The sequence of N buckets for a
  # distribution consists of an underflow bucket (number 0), zero or more
  # finite buckets (number 1 through N - 2) and an overflow bucket (number N -
  # 1). The buckets are contiguous: the lower bound of bucket i (i > 0) is the
  # same as the upper bound of bucket i - 1. The buckets span the whole range
  # of finite values: lower bound of the underflow bucket is -infinity and the
  # upper bound of the overflow bucket is +infinity. The finite buckets are
  # so-called because both bounds are finite.
  # @!attribute [rw] linear_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Linear]
  #     The linear bucket.
  # @!attribute [rw] exponential_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Exponential]
  #     The exponential buckets.
  # @!attribute [rw] explicit_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Explicit]
  #     The explicit buckets.
  class BucketOptions
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods

    # Specifies a linear sequence of buckets that all have the same width
    # (except overflow and underflow). Each bucket represents a constant
    # absolute uncertainty on the specific value in the bucket.
    #
    # There are `num_finite_buckets + 2` (= N) buckets. Bucket `i` has the
    # following boundaries:
    #
    #    Upper bound (0 <= i < N-1):     offset + (width * i).
    #    Lower bound (1 <= i < N):       offset + (width * (i - 1)).
    # @!attribute [rw] num_finite_buckets
    #   @return [::Integer]
    #     Must be greater than 0.
    # @!attribute [rw] width
    #   @return [::Float]
    #     Must be greater than 0.
    # @!attribute [rw] offset
    #   @return [::Float]
    #     Lower bound of the first bucket.
    class Linear
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end

    # Specifies an exponential sequence of buckets that have a width that is
    # proportional to the value of the lower bound. Each bucket represents a
    # constant relative uncertainty on a specific value in the bucket.
    #
    # There are `num_finite_buckets + 2` (= N) buckets. Bucket `i` has the
    # following boundaries:
    #
    #    Upper bound (0 <= i < N-1):     scale * (growth_factor ^ i).
    #    Lower bound (1 <= i < N):       scale * (growth_factor ^ (i - 1)).
    # @!attribute [rw] num_finite_buckets
    #   @return [::Integer]
    #     Must be greater than 0.
    # @!attribute [rw] growth_factor
    #   @return [::Float]
    #     Must be greater than 1.
    # @!attribute [rw] scale
    #   @return [::Float]
    #     Must be greater than 0.
    class Exponential
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end

    # Specifies a set of buckets with arbitrary widths.
    #
    # There are `size(bounds) + 1` (= N) buckets. Bucket `i` has the following
    # boundaries:
    #
    #    Upper bound (0 <= i < N-1):     bounds[i]
    #    Lower bound (1 <= i < N);       bounds[i - 1]
    #
    # The `bounds` field must contain at least one element. If `bounds` has
    # only one element, then there are no finite buckets, and that single
    # element is the common boundary of the overflow and underflow buckets.
    # @!attribute [rw] bounds
    #   @return [::Array<::Float>]
    #     The values must be monotonically increasing.
    class Explicit
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end
  end

  # Exemplars are example points that may be used to annotate aggregated
  # distribution values. They are metadata that gives information about a
  # particular value added to a Distribution bucket, such as a trace ID that
  # was active when a value was added. They may contain further information,
  # such as a example values and timestamps, origin, etc.
  # @!attribute [rw] value
  #   @return [::Float]
  #     Value of the exemplar point. This value determines to which bucket the
  #     exemplar belongs.
  # @!attribute [rw] timestamp
  #   @return [::Google::Protobuf::Timestamp]
  #     The observation (sampling) time of the above value.
  # @!attribute [rw] attachments
  #   @return [::Array<::Google::Protobuf::Any>]
  #     Contextual information about the example value. Examples are:
  #
  #       Trace ID: type.googleapis.com/google.devtools.cloudtrace.v1.Trace
  #
  #       Literal string: type.googleapis.com/google.protobuf.StringValue
  #
  #       Labels dropped during aggregation:
  #         type.googleapis.com/google.monitoring.v3.DroppedLabels
  #
  #     There may be only a single attachment of any given message type in a
  #     single exemplar, and this is enforced by the system.
  class Exemplar
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods
  end
end

#sum_of_squared_deviation ⇒ ::Float

Returns The sum of squared deviations from the mean of the values in the population. For values x_i this is:

Sum[i=1..n]((x_i - mean)^2)

Knuth, "The Art of Computer Programming", Vol. 2, page 323, 3rd edition describes Welford's method for accumulating this sum in one pass.

If count is zero then this field must be zero.

Returns:

  • (::Float) —

    The sum of squared deviations from the mean of the values in the population. For values x_i this is:

    Sum[i=1..n]((x_i - mean)^2)

    Knuth, "The Art of Computer Programming", Vol. 2, page 323, 3rd edition describes Welford's method for accumulating this sum in one pass.

    If count is zero then this field must be zero.



84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
 
# File 'proto_docs/google/api/distribution.rb', line 84

class Distribution
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods

  # The range of the population values.
  # @!attribute [rw] min
  #   @return [::Float]
  #     The minimum of the population values.
  # @!attribute [rw] max
  #   @return [::Float]
  #     The maximum of the population values.
  class Range
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods
  end

  # `BucketOptions` describes the bucket boundaries used to create a histogram
  # for the distribution. The buckets can be in a linear sequence, an
  # exponential sequence, or each bucket can be specified explicitly.
  # `BucketOptions` does not include the number of values in each bucket.
  #
  # A bucket has an inclusive lower bound and exclusive upper bound for the
  # values that are counted for that bucket. The upper bound of a bucket must
  # be strictly greater than the lower bound. The sequence of N buckets for a
  # distribution consists of an underflow bucket (number 0), zero or more
  # finite buckets (number 1 through N - 2) and an overflow bucket (number N -
  # 1). The buckets are contiguous: the lower bound of bucket i (i > 0) is the
  # same as the upper bound of bucket i - 1. The buckets span the whole range
  # of finite values: lower bound of the underflow bucket is -infinity and the
  # upper bound of the overflow bucket is +infinity. The finite buckets are
  # so-called because both bounds are finite.
  # @!attribute [rw] linear_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Linear]
  #     The linear bucket.
  # @!attribute [rw] exponential_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Exponential]
  #     The exponential buckets.
  # @!attribute [rw] explicit_buckets
  #   @return [::Google::Api::Distribution::BucketOptions::Explicit]
  #     The explicit buckets.
  class BucketOptions
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods

    # Specifies a linear sequence of buckets that all have the same width
    # (except overflow and underflow). Each bucket represents a constant
    # absolute uncertainty on the specific value in the bucket.
    #
    # There are `num_finite_buckets + 2` (= N) buckets. Bucket `i` has the
    # following boundaries:
    #
    #    Upper bound (0 <= i < N-1):     offset + (width * i).
    #    Lower bound (1 <= i < N):       offset + (width * (i - 1)).
    # @!attribute [rw] num_finite_buckets
    #   @return [::Integer]
    #     Must be greater than 0.
    # @!attribute [rw] width
    #   @return [::Float]
    #     Must be greater than 0.
    # @!attribute [rw] offset
    #   @return [::Float]
    #     Lower bound of the first bucket.
    class Linear
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end

    # Specifies an exponential sequence of buckets that have a width that is
    # proportional to the value of the lower bound. Each bucket represents a
    # constant relative uncertainty on a specific value in the bucket.
    #
    # There are `num_finite_buckets + 2` (= N) buckets. Bucket `i` has the
    # following boundaries:
    #
    #    Upper bound (0 <= i < N-1):     scale * (growth_factor ^ i).
    #    Lower bound (1 <= i < N):       scale * (growth_factor ^ (i - 1)).
    # @!attribute [rw] num_finite_buckets
    #   @return [::Integer]
    #     Must be greater than 0.
    # @!attribute [rw] growth_factor
    #   @return [::Float]
    #     Must be greater than 1.
    # @!attribute [rw] scale
    #   @return [::Float]
    #     Must be greater than 0.
    class Exponential
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end

    # Specifies a set of buckets with arbitrary widths.
    #
    # There are `size(bounds) + 1` (= N) buckets. Bucket `i` has the following
    # boundaries:
    #
    #    Upper bound (0 <= i < N-1):     bounds[i]
    #    Lower bound (1 <= i < N);       bounds[i - 1]
    #
    # The `bounds` field must contain at least one element. If `bounds` has
    # only one element, then there are no finite buckets, and that single
    # element is the common boundary of the overflow and underflow buckets.
    # @!attribute [rw] bounds
    #   @return [::Array<::Float>]
    #     The values must be monotonically increasing.
    class Explicit
      include ::Google::Protobuf::MessageExts
      extend ::Google::Protobuf::MessageExts::ClassMethods
    end
  end

  # Exemplars are example points that may be used to annotate aggregated
  # distribution values. They are metadata that gives information about a
  # particular value added to a Distribution bucket, such as a trace ID that
  # was active when a value was added. They may contain further information,
  # such as a example values and timestamps, origin, etc.
  # @!attribute [rw] value
  #   @return [::Float]
  #     Value of the exemplar point. This value determines to which bucket the
  #     exemplar belongs.
  # @!attribute [rw] timestamp
  #   @return [::Google::Protobuf::Timestamp]
  #     The observation (sampling) time of the above value.
  # @!attribute [rw] attachments
  #   @return [::Array<::Google::Protobuf::Any>]
  #     Contextual information about the example value. Examples are:
  #
  #       Trace ID: type.googleapis.com/google.devtools.cloudtrace.v1.Trace
  #
  #       Literal string: type.googleapis.com/google.protobuf.StringValue
  #
  #       Labels dropped during aggregation:
  #         type.googleapis.com/google.monitoring.v3.DroppedLabels
  #
  #     There may be only a single attachment of any given message type in a
  #     single exemplar, and this is enforced by the system.
  class Exemplar
    include ::Google::Protobuf::MessageExts
    extend ::Google::Protobuf::MessageExts::ClassMethods
  end
end