Class: Google::Cloud::Compute::V1::RouterNat

Inherits:

Object

Object
Google::Cloud::Compute::V1::RouterNat

show all

Extended by:: Protobuf::MessageExts::ClassMethods

Includes:: Protobuf::MessageExts

Defined in:: proto_docs/google/cloud/compute/v1/compute.rb

Overview

Represents a Nat resource. It enables the VMs within the specified subnetworks to access Internet without external IP addresses. It specifies a list of subnetworks (and the ranges within) that want to use NAT. Customers can also provide the external IPs that would be used for NAT. GCP would auto-allocate ephemeral IPs if no external IPs are provided.

Defined Under Namespace

Modules: EndpointTypes, NatIpAllocateOption, SourceSubnetworkIpRangesToNat

Instance Attribute Summary collapse

#drain_nat_ips ⇒ ::Array<::String>
A list of URLs of the IP resources to be drained.
#enable_dynamic_port_allocation ⇒ ::Boolean
Enable Dynamic Port Allocation.
#enable_endpoint_independent_mapping ⇒ ::Boolean
#endpoint_types ⇒ ::Array<::String>
List of NAT-ted endpoint types supported by the Nat Gateway.
#icmp_idle_timeout_sec ⇒ ::Integer
Timeout (in seconds) for ICMP connections.
#log_config ⇒ ::Google::Cloud::Compute::V1::RouterNatLogConfig
Configure logging on this NAT.
#max_ports_per_vm ⇒ ::Integer
Maximum number of ports allocated to a VM from this NAT config when Dynamic Port Allocation is enabled.
#min_ports_per_vm ⇒ ::Integer
Minimum number of ports allocated to a VM from this NAT config.
#name ⇒ ::String
Unique name of this Nat service.
#nat_ip_allocate_option ⇒ ::String
Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers.
#nat_ips ⇒ ::Array<::String>
A list of URLs of the IP resources used for this Nat service.
#rules ⇒ ::Array<::Google::Cloud::Compute::V1::RouterNatRule>
A list of rules associated with this NAT.
#source_subnetwork_ip_ranges_to_nat ⇒ ::String
Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat.
#subnetworks ⇒ ::Array<::Google::Cloud::Compute::V1::RouterNatSubnetworkToNat>
A list of Subnetwork resources whose traffic should be translated by NAT Gateway.
#tcp_established_idle_timeout_sec ⇒ ::Integer
Timeout (in seconds) for TCP established connections.
#tcp_time_wait_timeout_sec ⇒ ::Integer
Timeout (in seconds) for TCP connections that are in TIME_WAIT state.
#tcp_transitory_idle_timeout_sec ⇒ ::Integer
Timeout (in seconds) for TCP transitory connections.
#udp_idle_timeout_sec ⇒ ::Integer
Timeout (in seconds) for UDP connections.

Instance Attribute Details

#drain_nat_ips ⇒ `::Array<::String>`

Returns A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT only.

Returns:

(::Array<::String>) —
A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT only.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#enable_dynamic_port_allocation ⇒ `::Boolean`

Returns Enable Dynamic Port Allocation. If not specified, it is disabled by default. If set to true, - Dynamic Port Allocation will be enabled on this NAT config. - enableEndpointIndependentMapping cannot be set to true. - If minPorts is set, minPortsPerVm must be set to a power of two greater than or equal to 32. If minPortsPerVm is not set, a minimum of 32 ports will be allocated to a VM from this NAT config.

Returns:

(::Boolean) —
Enable Dynamic Port Allocation. If not specified, it is disabled by default. If set to true, - Dynamic Port Allocation will be enabled on this NAT config. - enableEndpointIndependentMapping cannot be set to true. - If minPorts is set, minPortsPerVm must be set to a power of two greater than or equal to 32. If minPortsPerVm is not set, a minimum of 32 ports will be allocated to a VM from this NAT config.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#enable_endpoint_independent_mapping ⇒ `::Boolean`

Returns:

(::Boolean)

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#endpoint_types ⇒ `::Array<::String>`

Returns List of NAT-ted endpoint types supported by the Nat Gateway. If the list is empty, then it will be equivalent to include ENDPOINT_TYPE_VM Check the EndpointTypes enum for the list of possible values.

Returns:

(::Array<::String>) —
List of NAT-ted endpoint types supported by the Nat Gateway. If the list is empty, then it will be equivalent to include ENDPOINT_TYPE_VM Check the EndpointTypes enum for the list of possible values.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#icmp_idle_timeout_sec ⇒ `::Integer`

Returns Timeout (in seconds) for ICMP connections. Defaults to 30s if not set.

Returns:

(::Integer) —
Timeout (in seconds) for ICMP connections. Defaults to 30s if not set.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#log_config ⇒ `::Google::Cloud::Compute::V1::RouterNatLogConfig`

Returns Configure logging on this NAT.

Returns:

(::Google::Cloud::Compute::V1::RouterNatLogConfig) —
Configure logging on this NAT.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#max_ports_per_vm ⇒ `::Integer`

Returns Maximum number of ports allocated to a VM from this NAT config when Dynamic Port Allocation is enabled. If Dynamic Port Allocation is not enabled, this field has no effect. If Dynamic Port Allocation is enabled, and this field is set, it must be set to a power of two greater than minPortsPerVm, or 64 if minPortsPerVm is not set. If Dynamic Port Allocation is enabled and this field is not set, a maximum of 65536 ports will be allocated to a VM from this NAT config.

Returns:

(::Integer) —
Maximum number of ports allocated to a VM from this NAT config when Dynamic Port Allocation is enabled. If Dynamic Port Allocation is not enabled, this field has no effect. If Dynamic Port Allocation is enabled, and this field is set, it must be set to a power of two greater than minPortsPerVm, or 64 if minPortsPerVm is not set. If Dynamic Port Allocation is enabled and this field is not set, a maximum of 65536 ports will be allocated to a VM from this NAT config.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#min_ports_per_vm ⇒ `::Integer`

Returns Minimum number of ports allocated to a VM from this NAT config. If not set, a default number of ports is allocated to a VM. This is rounded up to the nearest power of 2. For example, if the value of this field is 50, at least 64 ports are allocated to a VM.

Returns:

(::Integer) —
Minimum number of ports allocated to a VM from this NAT config. If not set, a default number of ports is allocated to a VM. This is rounded up to the nearest power of 2. For example, if the value of this field is 50, at least 64 ports are allocated to a VM.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#name ⇒ `::String`

Returns Unique name of this Nat service. The name must be 1-63 characters long and comply with RFC1035.

Returns:

(::String) —
Unique name of this Nat service. The name must be 1-63 characters long and comply with RFC1035.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#nat_ip_allocate_option ⇒ `::String`

Returns Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty. Check the NatIpAllocateOption enum for the list of possible values.

Returns:

(::String) —
Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty. Check the NatIpAllocateOption enum for the list of possible values.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#nat_ips ⇒ `::Array<::String>`

Returns A list of URLs of the IP resources used for this Nat service. These IP addresses must be valid static external IP addresses assigned to the project.

Returns:

(::Array<::String>) —
A list of URLs of the IP resources used for this Nat service. These IP addresses must be valid static external IP addresses assigned to the project.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#rules ⇒ `::Array<::Google::Cloud::Compute::V1::RouterNatRule>`

Returns A list of rules associated with this NAT.

Returns:

(::Array<::Google::Cloud::Compute::V1::RouterNatRule>) —
A list of rules associated with this NAT.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#source_subnetwork_ip_ranges_to_nat ⇒ `::String`

Returns Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region. Check the SourceSubnetworkIpRangesToNat enum for the list of possible values.

Returns:

(::String) —
Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region. Check the SourceSubnetworkIpRangesToNat enum for the list of possible values.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#subnetworks ⇒ `::Array<::Google::Cloud::Compute::V1::RouterNatSubnetworkToNat>`

Returns A list of Subnetwork resources whose traffic should be translated by NAT Gateway. It is used only when LIST_OF_SUBNETWORKS is selected for the SubnetworkIpRangeToNatOption above.

Returns:

(::Array<::Google::Cloud::Compute::V1::RouterNatSubnetworkToNat>) —
A list of Subnetwork resources whose traffic should be translated by NAT Gateway. It is used only when LIST_OF_SUBNETWORKS is selected for the SubnetworkIpRangeToNatOption above.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#tcp_established_idle_timeout_sec ⇒ `::Integer`

Returns Timeout (in seconds) for TCP established connections. Defaults to 1200s if not set.

Returns:

(::Integer) —
Timeout (in seconds) for TCP established connections. Defaults to 1200s if not set.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#tcp_time_wait_timeout_sec ⇒ `::Integer`

Returns Timeout (in seconds) for TCP connections that are in TIME_WAIT state. Defaults to 120s if not set.

Returns:

(::Integer) —
Timeout (in seconds) for TCP connections that are in TIME_WAIT state. Defaults to 120s if not set.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#tcp_transitory_idle_timeout_sec ⇒ `::Integer`

Returns Timeout (in seconds) for TCP transitory connections. Defaults to 30s if not set.

Returns:

(::Integer) —
Timeout (in seconds) for TCP transitory connections. Defaults to 30s if not set.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

#udp_idle_timeout_sec ⇒ `::Integer`

Returns Timeout (in seconds) for UDP connections. Defaults to 30s if not set.

Returns:

(::Integer) —
Timeout (in seconds) for UDP connections. Defaults to 30s if not set.

# File 'proto_docs/google/cloud/compute/v1/compute.rb', line 23125

class RouterNat
  include ::Google::Protobuf::MessageExts
  extend ::Google::Protobuf::MessageExts::ClassMethods


  module EndpointTypes
    # A value indicating that the enum field is not set.
    UNDEFINED_ENDPOINT_TYPES = 0

    # This is used for Secure Web Gateway endpoints.
    ENDPOINT_TYPE_SWG = 159344456

    # This is the default.
    ENDPOINT_TYPE_VM = 57095474
  end

  # Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
  module NatIpAllocateOption
    # A value indicating that the enum field is not set.
    UNDEFINED_NAT_IP_ALLOCATE_OPTION = 0

    # Nat IPs are allocated by GCP; customers can not specify any Nat IPs.
    AUTO_ONLY = 182333500

    # Only use Nat IPs provided by customers. When specified Nat IPs are not enough then the Nat service fails for new VMs.
    MANUAL_ONLY = 261251205
  end

  # Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  module SourceSubnetworkIpRangesToNat
    # A value indicating that the enum field is not set.
    UNDEFINED_SOURCE_SUBNETWORK_IP_RANGES_TO_NAT = 0

    # All the IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_IP_RANGES = 179964376

    # All the primary IP ranges in every Subnetwork are allowed to Nat.
    ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES = 185573819

    # A list of Subnetworks are allowed to Nat (specified in the field subnetwork below)
    LIST_OF_SUBNETWORKS = 517542270
  end
end

Class: Google::Cloud::Compute::V1::RouterNat

Overview

Defined Under Namespace

Instance Attribute Summary collapse

Instance Attribute Details

#drain_nat_ips ⇒ ::Array<::String>

#enable_dynamic_port_allocation ⇒ ::Boolean

#enable_endpoint_independent_mapping ⇒ ::Boolean

#endpoint_types ⇒ ::Array<::String>

#icmp_idle_timeout_sec ⇒ ::Integer

#log_config ⇒ ::Google::Cloud::Compute::V1::RouterNatLogConfig

#max_ports_per_vm ⇒ ::Integer

#min_ports_per_vm ⇒ ::Integer

#name ⇒ ::String

#nat_ip_allocate_option ⇒ ::String

#nat_ips ⇒ ::Array<::String>

#rules ⇒ ::Array<::Google::Cloud::Compute::V1::RouterNatRule>

#source_subnetwork_ip_ranges_to_nat ⇒ ::String

#subnetworks ⇒ ::Array<::Google::Cloud::Compute::V1::RouterNatSubnetworkToNat>

#tcp_established_idle_timeout_sec ⇒ ::Integer

#tcp_time_wait_timeout_sec ⇒ ::Integer

#tcp_transitory_idle_timeout_sec ⇒ ::Integer

#udp_idle_timeout_sec ⇒ ::Integer

#drain_nat_ips ⇒ `::Array<::String>`

#enable_dynamic_port_allocation ⇒ `::Boolean`

#enable_endpoint_independent_mapping ⇒ `::Boolean`

#endpoint_types ⇒ `::Array<::String>`

#icmp_idle_timeout_sec ⇒ `::Integer`

#log_config ⇒ `::Google::Cloud::Compute::V1::RouterNatLogConfig`

#max_ports_per_vm ⇒ `::Integer`

#min_ports_per_vm ⇒ `::Integer`

#name ⇒ `::String`

#nat_ip_allocate_option ⇒ `::String`

#nat_ips ⇒ `::Array<::String>`

#rules ⇒ `::Array<::Google::Cloud::Compute::V1::RouterNatRule>`

#source_subnetwork_ip_ranges_to_nat ⇒ `::String`

#subnetworks ⇒ `::Array<::Google::Cloud::Compute::V1::RouterNatSubnetworkToNat>`

#tcp_established_idle_timeout_sec ⇒ `::Integer`

#tcp_time_wait_timeout_sec ⇒ `::Integer`

#tcp_transitory_idle_timeout_sec ⇒ `::Integer`

#udp_idle_timeout_sec ⇒ `::Integer`