Class: Aws::MediaLive::Types::H265Settings

Inherits:

Struct

Object
Struct
Aws::MediaLive::Types::H265Settings

show all

Includes:: Structure

Defined in:: lib/aws-sdk-medialive/types.rb

Overview

H265 Settings

Constant Summary collapse

SENSITIVE =

[]

Instance Attribute Summary collapse

#adaptive_quantization ⇒ String

Adaptive quantization.
#afd_signaling ⇒ String

Indicates that AFD values will be written into the output stream.
#alternative_transfer_function ⇒ String

Whether or not EML should insert an Alternative Transfer Function SEI message to support backwards compatibility with non-HDR decoders and displays.
#bitrate ⇒ Integer

Average bitrate in bits/second.
#buf_size ⇒ Integer

Size of buffer (HRD buffer model) in bits.
#color_metadata ⇒ String

Includes colorspace metadata in the output.
#color_space_settings ⇒ Types::H265ColorSpaceSettings

Color Space settings.
#filter_settings ⇒ Types::H265FilterSettings

Optional filters that you can apply to an encode.
#fixed_afd ⇒ String

Four bit AFD value to write on all frames of video in the output stream.
#flicker_aq ⇒ String

If set to enabled, adjust quantization within each frame to reduce flicker or ‘pop’ on I-frames.
#framerate_denominator ⇒ Integer

Framerate denominator.
#framerate_numerator ⇒ Integer

Framerate numerator - framerate is a fraction, e.g.
#gop_closed_cadence ⇒ Integer

Frequency of closed GOPs.
#gop_size ⇒ Float

GOP size (keyframe interval) in units of either frames or seconds per gopSizeUnits.
#gop_size_units ⇒ String

Indicates if the gopSize is specified in frames or seconds.
#level ⇒ String

H.265 Level.
#look_ahead_rate_control ⇒ String

Amount of lookahead.
#max_bitrate ⇒ Integer

For QVBR: See the tooltip for Quality level.
#min_i_interval ⇒ Integer

Only meaningful if sceneChangeDetect is set to enabled.
#mv_over_picture_boundaries ⇒ String

If you are setting up the picture as a tile, you must set this to “disabled”.
#mv_temporal_predictor ⇒ String

If you are setting up the picture as a tile, you must set this to “disabled”.
#par_denominator ⇒ Integer

Pixel Aspect Ratio denominator.
#par_numerator ⇒ Integer

Pixel Aspect Ratio numerator.
#profile ⇒ String

H.265 Profile.
#qvbr_quality_level ⇒ Integer

Controls the target quality for the video encode.
#rate_control_mode ⇒ String

Rate control mode.
#scan_type ⇒ String

Sets the scan type of the output to progressive or top-field-first interlaced.
#scene_change_detect ⇒ String

Scene change detection.
#slices ⇒ Integer

Number of slices per picture.
#tier ⇒ String

H.265 Tier.
#tile_height ⇒ Integer

Set this field to set up the picture as a tile.
#tile_padding ⇒ String

Set to “padded” to force MediaLive to add padding to the frame, to obtain a frame that is a whole multiple of the tile size.
#tile_width ⇒ Integer

Set this field to set up the picture as a tile.
#timecode_burnin_settings ⇒ Types::TimecodeBurninSettings

Timecode burn-in settings.
#timecode_insertion ⇒ String

Determines how timecodes should be inserted into the video elementary stream.
#treeblock_size ⇒ String

Select the tree block size used for encoding.

Instance Attribute Details

#adaptive_quantization ⇒ `String`

Adaptive quantization. Allows intra-frame quantizers to vary to improve visual quality.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#afd_signaling ⇒ `String`

Indicates that AFD values will be written into the output stream. If afdSignaling is “auto”, the system will try to preserve the input AFD value (in cases where multiple AFD values are valid). If set to “fixed”, the AFD value will be the value configured in the fixedAfd parameter.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#alternative_transfer_function ⇒ `String`

Whether or not EML should insert an Alternative Transfer Function SEI message to support backwards compatibility with non-HDR decoders and displays.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#bitrate ⇒ `Integer`

Average bitrate in bits/second. Required when the rate control mode is VBR or CBR. Not used for QVBR. In an MS Smooth output group, each output must have a unique value when its bitrate is rounded down to the nearest multiple of 1000.

Returns:

(Integer)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#buf_size ⇒ `Integer`

Size of buffer (HRD buffer model) in bits.

Returns:

(Integer)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#color_metadata ⇒ `String`

Includes colorspace metadata in the output.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#color_space_settings ⇒ `Types::H265ColorSpaceSettings`

Color Space settings

Returns:

(Types::H265ColorSpaceSettings)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#filter_settings ⇒ `Types::H265FilterSettings`

Optional filters that you can apply to an encode.

Returns:

(Types::H265FilterSettings)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#fixed_afd ⇒ `String`

Four bit AFD value to write on all frames of video in the output stream. Only valid when afdSignaling is set to ‘Fixed’.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#flicker_aq ⇒ `String`

If set to enabled, adjust quantization within each frame to reduce flicker or ‘pop’ on I-frames.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#framerate_denominator ⇒ `Integer`

Framerate denominator.

Returns:

(Integer)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#framerate_numerator ⇒ `Integer`

Framerate numerator - framerate is a fraction, e.g. 24000 / 1001 = 23.976 fps.

Returns:

(Integer)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#gop_closed_cadence ⇒ `Integer`

Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.

Returns:

(Integer)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#gop_size ⇒ `Float`

GOP size (keyframe interval) in units of either frames or seconds per gopSizeUnits. If gopSizeUnits is frames, gopSize must be an integer and must be greater than or equal to 1. If gopSizeUnits is seconds, gopSize must be greater than 0, but need not be an integer.

Returns:

(Float)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#gop_size_units ⇒ `String`

Indicates if the gopSize is specified in frames or seconds. If seconds the system will convert the gopSize into a frame count at run time.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#level ⇒ `String`

H.265 Level.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#look_ahead_rate_control ⇒ `String`

Amount of lookahead. A value of low can decrease latency and memory usage, while high can produce better quality for certain content.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#max_bitrate ⇒ `Integer`

For QVBR: See the tooltip for Quality level

Returns:

(Integer)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#min_i_interval ⇒ `Integer`

Only meaningful if sceneChangeDetect is set to enabled. Defaults to 5 if multiplex rate control is used. Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1

Returns:

(Integer)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#mv_over_picture_boundaries ⇒ `String`

If you are setting up the picture as a tile, you must set this to “disabled”. In all other configurations, you typically enter “enabled”.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#mv_temporal_predictor ⇒ `String`

If you are setting up the picture as a tile, you must set this to “disabled”. In other configurations, you typically enter “enabled”.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#par_denominator ⇒ `Integer`

Pixel Aspect Ratio denominator.

Returns:

(Integer)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#par_numerator ⇒ `Integer`

Pixel Aspect Ratio numerator.

Returns:

(Integer)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#profile ⇒ `String`

H.265 Profile.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#qvbr_quality_level ⇒ `Integer`

Controls the target quality for the video encode. Applies only when the rate control mode is QVBR. Set values for the QVBR quality level field and Max bitrate field that suit your most important viewing devices. Recommended values are: - Primary screen: Quality level: 8 to 10. Max bitrate: 4M - PC or tablet: Quality level: 7. Max bitrate: 1.5M to 3M - Smartphone: Quality level: 6. Max bitrate: 1M to 1.5M

Returns:

(Integer)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#rate_control_mode ⇒ `String`

Rate control mode. QVBR: Quality will match the specified quality level except when it is constrained by the maximum bitrate. Recommended if you or your viewers pay for bandwidth. CBR: Quality varies, depending on the video complexity. Recommended only if you distribute your assets to devices that cannot handle variable bitrates. Multiplex: This rate control mode is only supported (and is required) when the video is being delivered to a MediaLive Multiplex in which case the rate control configuration is controlled by the properties within the Multiplex Program.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#scan_type ⇒ `String`

Sets the scan type of the output to progressive or top-field-first interlaced.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#scene_change_detect ⇒ `String`

Scene change detection.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#slices ⇒ `Integer`

Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures. This field is optional; when no value is specified the encoder will choose the number of slices based on encode resolution.

Returns:

(Integer)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#tier ⇒ `String`

H.265 Tier.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#tile_height ⇒ `Integer`

Set this field to set up the picture as a tile. You must also set tileWidth. The tile height must result in 22 or fewer rows in the frame. The tile width must result in 20 or fewer columns in the frame. And finally, the product of the column count and row count must be 64 of less. If the tile width and height are specified, MediaLive will override the video codec slices field with a value that MediaLive calculates

Returns:

(Integer)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#tile_padding ⇒ `String`

Set to “padded” to force MediaLive to add padding to the frame, to obtain a frame that is a whole multiple of the tile size. If you are setting up the picture as a tile, you must enter “padded”. In all other configurations, you typically enter “none”.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#tile_width ⇒ `Integer`

Set this field to set up the picture as a tile. See tileHeight for more information.

Returns:

(Integer)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#timecode_burnin_settings ⇒ `Types::TimecodeBurninSettings`

Timecode burn-in settings

Returns:

(Types::TimecodeBurninSettings)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#timecode_insertion ⇒ `String`

Determines how timecodes should be inserted into the video elementary stream. - ‘disabled’: Do not include timecodes - ‘picTimingSei’: Pass through picture timing SEI messages from the source specified in Timecode Config

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

#treeblock_size ⇒ `String`

Select the tree block size used for encoding. If you enter “auto”, the encoder will pick the best size. If you are setting up the picture as a tile, you must set this to 32x32. In all other configurations, you typically enter “auto”.

Returns:

(String)

# File 'lib/aws-sdk-medialive/types.rb', line 5503

class H265Settings < Struct.new(
  :adaptive_quantization,
  :afd_signaling,
  :alternative_transfer_function,
  :bitrate,
  :buf_size,
  :color_metadata,
  :color_space_settings,
  :filter_settings,
  :fixed_afd,
  :flicker_aq,
  :framerate_denominator,
  :framerate_numerator,
  :gop_closed_cadence,
  :gop_size,
  :gop_size_units,
  :level,
  :look_ahead_rate_control,
  :max_bitrate,
  :min_i_interval,
  :par_denominator,
  :par_numerator,
  :profile,
  :qvbr_quality_level,
  :rate_control_mode,
  :scan_type,
  :scene_change_detect,
  :slices,
  :tier,
  :timecode_insertion,
  :timecode_burnin_settings,
  :mv_over_picture_boundaries,
  :mv_temporal_predictor,
  :tile_height,
  :tile_padding,
  :tile_width,
  :treeblock_size)
  SENSITIVE = []
  include Aws::Structure
end

Class: Aws::MediaLive::Types::H265Settings

Overview

Constant Summary collapse

Instance Attribute Summary collapse

Instance Attribute Details

#adaptive_quantization ⇒ String

#afd_signaling ⇒ String

#alternative_transfer_function ⇒ String

#bitrate ⇒ Integer

#buf_size ⇒ Integer

#color_metadata ⇒ String

#color_space_settings ⇒ Types::H265ColorSpaceSettings

#filter_settings ⇒ Types::H265FilterSettings

#fixed_afd ⇒ String

#flicker_aq ⇒ String

#framerate_denominator ⇒ Integer

#framerate_numerator ⇒ Integer

#gop_closed_cadence ⇒ Integer

#gop_size ⇒ Float

#gop_size_units ⇒ String

#level ⇒ String

#look_ahead_rate_control ⇒ String

#max_bitrate ⇒ Integer

#min_i_interval ⇒ Integer

#mv_over_picture_boundaries ⇒ String

#mv_temporal_predictor ⇒ String

#par_denominator ⇒ Integer

#par_numerator ⇒ Integer

#profile ⇒ String

#qvbr_quality_level ⇒ Integer

#rate_control_mode ⇒ String

#scan_type ⇒ String

#scene_change_detect ⇒ String

#slices ⇒ Integer

#tier ⇒ String

#tile_height ⇒ Integer

#tile_padding ⇒ String

#tile_width ⇒ Integer

#timecode_burnin_settings ⇒ Types::TimecodeBurninSettings

#timecode_insertion ⇒ String

#treeblock_size ⇒ String

#adaptive_quantization ⇒ `String`

#afd_signaling ⇒ `String`

#alternative_transfer_function ⇒ `String`

#bitrate ⇒ `Integer`

#buf_size ⇒ `Integer`

#color_metadata ⇒ `String`

#color_space_settings ⇒ `Types::H265ColorSpaceSettings`

#filter_settings ⇒ `Types::H265FilterSettings`

#fixed_afd ⇒ `String`

#flicker_aq ⇒ `String`

#framerate_denominator ⇒ `Integer`

#framerate_numerator ⇒ `Integer`

#gop_closed_cadence ⇒ `Integer`

#gop_size ⇒ `Float`

#gop_size_units ⇒ `String`

#level ⇒ `String`

#look_ahead_rate_control ⇒ `String`

#max_bitrate ⇒ `Integer`

#min_i_interval ⇒ `Integer`

#mv_over_picture_boundaries ⇒ `String`

#mv_temporal_predictor ⇒ `String`

#par_denominator ⇒ `Integer`

#par_numerator ⇒ `Integer`

#profile ⇒ `String`

#qvbr_quality_level ⇒ `Integer`

#rate_control_mode ⇒ `String`

#scan_type ⇒ `String`

#scene_change_detect ⇒ `String`

#slices ⇒ `Integer`

#tier ⇒ `String`

#tile_height ⇒ `Integer`

#tile_padding ⇒ `String`

#tile_width ⇒ `Integer`

#timecode_burnin_settings ⇒ `Types::TimecodeBurninSettings`

#timecode_insertion ⇒ `String`

#treeblock_size ⇒ `String`