Class: Ansible::Ruby::Modules::Aci_interface_policy_ospf

Inherits:

Base

• Object
• Ansible::Ruby::Models::Base
• Base
• Ansible::Ruby::Modules::Aci_interface_policy_ospf

Defined in:

lib/ansible/ruby/modules/generated/network/aci/aci_interface_policy_ospf.rb

Overview

Manage OSPF interface policies on Cisco ACI fabrics.

Instance Method Summary

• #controls ⇒ :"advert-subnet", ...

  The interface policy controls.,This is a list of one or more of the following controls:,C(advert-subnet) – Advertise IP subnet instead of a host mask in the router LSA.,C(bfd) – Bidirectional Forwarding Detection,C(mtu-ignore) – Disables MTU mismatch detection on an interface.,C(passive) – The interface does not participate in the OSPF protocol and will not establish adjacencies or send routing updates.

• #cost ⇒ Object^?

  The OSPF cost of the interface.,The cost (also called metric) of an interface in OSPF is an indication of the overhead required to send packets across a certain interface.

• #dead_interval ⇒ Integer^?

  The interval between hello packets from a neighbor before the router declares the neighbor as down.,This value must be the same for all networking devices on a specific network.,Specifying a smaller dead interval (seconds) will give faster detection of a neighbor being down and improve convergence, but might cause more routing instability.,Accepted values range between C(1) and C(65535).,The APIC defaults to C(40) when unset during creation.

• #description ⇒ Object^?

  The description for the OSPF interface.

• #hello_interval ⇒ Integer^?

  The interval between hello packets that OSPF sends on the interface.,Note that the smaller the hello interval, the faster topological changes will be detected, but more routing traffic will ensue.,This value must be the same for all routers and access servers on a specific network.,Accepted values range between C(1) and C(65535).,The APIC defaults to C(10) when unset during creation.

• #network_type ⇒ :bcast, ...

  The OSPF interface policy network type.,OSPF supports broadcast and point-to-point.,The APIC defaults to C(unspecified) when unset during creation.

• #ospf ⇒ String

  The OSPF interface policy name.,This name can be between 1 and 64 alphanumeric characters.,Note that you cannot change this name after the object has been saved.

• #prefix_suppression ⇒ Symbol^?

  Whether prefix suppressions is enabled or disabled.,The APIC defaults to C(inherit) when unset during creation.

• #priority ⇒ Integer^?

  The priority for the OSPF interface profile.,Accepted values ranges between C(0) and C(255).,The APIC defaults to C(1) when unset during creation.

• #retransmit_interval ⇒ Integer^?

  The interval between LSA retransmissions.,The retransmit interval occurs while the router is waiting for an acknowledgement from the neighbor router that it received the LSA.,If no acknowlegment is received at the end of the interval, then the LSA is resent.,Accepted values range between C(1) and C(65535).,The APIC defaults to C(5) when unset during creation.

• #state ⇒ :absent, ...

  Use C(present) or C(absent) for adding or removing.,Use C(query) for listing an object or multiple objects.

• #tenant ⇒ String

  The name of the Tenant the OSPF interface policy should belong to.

• #transmit_delay ⇒ Integer^?

  The delay time needed to send an LSA update packet.,OSPF increments the LSA age time by the transmit delay amount before transmitting the LSA update.,You should take into account the transmission and propagation delays for the interface when you set this value.,Accepted values range between C(1) and C(450).,The APIC defaults to C(1) when unset during creation.

Methods inherited from Base

#ansible_name, #to_h

Methods inherited from Ansible::Ruby::Models::Base

attr_option, attr_options, attribute, fix_inclusion, #initialize, remove_existing_validations, #to_h, validates

Constructor Details

This class inherits a constructor from Ansible::Ruby::Models::Base

Instance Method Details

#controls ⇒ :"advert-subnet", ...

# File 'lib/ansible/ruby/modules/generated/network/aci/aci_interface_policy_ospf.rb', line 30

attribute :controls

#cost ⇒ Object^?

# File 'lib/ansible/ruby/modules/generated/network/aci/aci_interface_policy_ospf.rb', line 27

attribute :cost

#dead_interval ⇒ Integer^?

# File 'lib/ansible/ruby/modules/generated/network/aci/aci_interface_policy_ospf.rb', line 34

attribute :dead_interval

#description ⇒ Object^?

# File 'lib/ansible/ruby/modules/generated/network/aci/aci_interface_policy_ospf.rb', line 20

attribute :description

#hello_interval ⇒ Integer^?

# File 'lib/ansible/ruby/modules/generated/network/aci/aci_interface_policy_ospf.rb', line 38

attribute :hello_interval

#network_type ⇒ :bcast, ...

# File 'lib/ansible/ruby/modules/generated/network/aci/aci_interface_policy_ospf.rb', line 23

attribute :network_type

#ospf ⇒ String

# File 'lib/ansible/ruby/modules/generated/network/aci/aci_interface_policy_ospf.rb', line 16

attribute :ospf

#prefix_suppression ⇒ Symbol^?

# File 'lib/ansible/ruby/modules/generated/network/aci/aci_interface_policy_ospf.rb', line 42

attribute :prefix_suppression

#priority ⇒ Integer^?

# File 'lib/ansible/ruby/modules/generated/network/aci/aci_interface_policy_ospf.rb', line 46

attribute :priority

#retransmit_interval ⇒ Integer^?

# File 'lib/ansible/ruby/modules/generated/network/aci/aci_interface_policy_ospf.rb', line 50

attribute :retransmit_interval

#state ⇒ :absent, ...

# File 'lib/ansible/ruby/modules/generated/network/aci/aci_interface_policy_ospf.rb', line 58

attribute :state

#tenant ⇒ String

# File 'lib/ansible/ruby/modules/generated/network/aci/aci_interface_policy_ospf.rb', line 12

attribute :tenant

#transmit_delay ⇒ Integer^?

# File 'lib/ansible/ruby/modules/generated/network/aci/aci_interface_policy_ospf.rb', line 54

attribute :transmit_delay