Module: Sass::Script::Functions

Included in:
EvaluationContext
Defined in:
lib/sass/script/functions.rb

Overview

Methods in this module are accessible from the SassScript context. For example, you can write

$color: hsl(120deg, 100%, 50%)

and it will call #hsl.

The following functions are provided:

Note: These functions are described in more detail below.

RGB Functions

rgb($red, $green, $blue) : Creates a Color from red, green, and blue values.

rgba($red, $green, $blue, $alpha) : Creates a Color from red, green, blue, and alpha values.

red($color) : Gets the red component of a color.

green($color) : Gets the green component of a color.

blue($color) : Gets the blue component of a color.

mix($color1, $color2, [$weight]) : Mixes two colors together.

HSL Functions

hsl($hue, $saturation, $lightness) : Creates a Color from hue, saturation, and lightness values.

hsla($hue, $saturation, $lightness, $alpha) : Creates a Color from hue, saturation, lightness, and alpha values.

hue($color) : Gets the hue component of a color.

saturation($color) : Gets the saturation component of a color.

lightness($color) : Gets the lightness component of a color.

adjust-hue($color, $degrees) : Changes the hue of a color.

lighten($color, $amount) : Makes a color lighter.

darken($color, $amount) : Makes a color darker.

saturate($color, $amount) : Makes a color more saturated.

desaturate($color, $amount) : Makes a color less saturated.

grayscale($color) : Converts a color to grayscale.

complement($color) : Returns the complement of a color.

invert($color) : Returns the inverse of a color.

Opacity Functions

alpha($color) / opacity($color) : Gets the alpha component (opacity) of a color.

rgba($color, $alpha) : Changes the alpha component for a color.

opacify($color, $amount) / fade-in($color, $amount) : Makes a color more opaque.

transparentize($color, $amount) / fade-out($color, $amount) : Makes a color more transparent.

Other Color Functions

adjust-color($color, [$red], [$green], [$blue], [$hue], [$saturation], [$lightness], [$alpha]) : Increases or decreases one or more components of a color.

scale-color($color, [$red], [$green], [$blue], [$saturation], [$lightness], [$alpha]) : Fluidly scales one or more properties of a color.

change-color($color, [$red], [$green], [$blue], [$hue], [$saturation], [$lightness], [$alpha]) : Changes one or more properties of a color.

ie-hex-str($color) : Converts a color into the format understood by IE filters.

String Functions

unquote($string) : Removes quotes from a string.

quote($string) : Adds quotes to a string.

str-length($string) : Returns the number of characters in a string.

str-insert($string, $insert, $index) : Inserts $insert into $string at $index.

str-index($string, $substring) : Returns the index of the first occurance of $substring in $string.

str-slice($string, $start-at, [$end-at]) : Extracts a substring from $string.

to-upper-case($string) : Converts a string to upper case.

to-lower-case($string) : Converts a string to lower case.

Number Functions

percentage($number) : Converts a unitless number to a percentage.

round($number) : Rounds a number to the nearest whole number.

ceil($number) : Rounds a number up to the next whole number.

floor($number) : Rounds a number down to the previous whole number.

abs($number) : Returns the absolute value of a number.

min($numbers...) : Finds the minimum of several numbers.

max($numbers...) : Finds the maximum of several numbers.

random([$limit]) : Returns a random number.

List Functions #list-functions

All list functions work for maps as well, treating them as lists of pairs.

length($list) : Returns the length of a list.

nth($list, $n) : Returns a specific item in a list.

join($list1, $list2, [$separator]) : Joins together two lists into one.

append($list1, $val, [$separator]) : Appends a single value onto the end of a list.

zip($lists...) : Combines several lists into a single multidimensional list.

index($list, $value) : Returns the position of a value within a list.

list-separator(#list) : Returns the separator of a list.

Map Functions #map-functions

map-get($map, $key) : Returns the value in a map associated with a given key.

map-merge($map1, $map2) : Merges two maps together into a new map.

map-remove($map, $keys...) : Returns a new map with keys removed.

map-keys($map) : Returns a list of all keys in a map.

map-values($map) : Returns a list of all values in a map.

map-has-key($map, $key) : Returns whether a map has a value associated with a given key.

keywords($args) : Returns the keywords passed to a function that takes variable arguments.

Selector Functions

Selector functions are very liberal in the formats they support for selector arguments. They can take a plain string, a list of lists as returned by & or anything in between:

  • A plain sring, such as ".foo .bar, .baz .bang".
  • A space-separated list of strings such as (".foo" ".bar").
  • A comma-separated list of strings such as (".foo .bar", ".baz .bang").
  • A comma-separated list of space-separated lists of strings such as ((".foo" ".bar"), (".baz" ".bang")).

In general, selector functions allow placeholder selectors (%foo) but disallow parent-reference selectors (&).

selector-nest($selectors...) : Nests selector beneath one another like they would be nested in the stylesheet.

selector-append($selectors...) : Appends selectors to one another without spaces in between.

selector-extend($selector, $extendee, $extender) : Extends $extendee with $extender within $selector.

selector-replace($selector, $original, $replacement) : Replaces $original with $replacement within $selector.

selector-unify($selector1, $selector2) : Unifies two selectors to produce a selector that matches elements matched by both.

is-superselector($super, $sub) : Returns whether $super matches all the elements $sub does, and possibly more.

simple-selectors($selector) : Returns the simple selectors that comprise a compound selector.

selector-parse($selector) : Parses a selector into the format returned by &.

Introspection Functions

feature-exists($feature) : Returns whether a feature exists in the current Sass runtime.

variable-exists($name) : Returns whether a variable with the given name exists in the current scope.

global-variable-exists($name) : Returns whether a variable with the given name exists in the global scope.

function-exists($name) : Returns whether a function with the given name exists.

mixin-exists($name) : Returns whether a mixin with the given name exists.

inspect($value) : Returns the string representation of a value as it would be represented in Sass.

type-of($value) : Returns the type of a value.

unit($number) : Returns the unit(s) associated with a number.

unitless($number) : Returns whether a number has units.

comparable($number1, $number2) : Returns whether two numbers can be added, subtracted, or compared.

call($name, $args...) : Dynamically calls a Sass function.

Miscellaneous Functions

if($condition, $if-true, $if-false) : Returns one of two values, depending on whether or not $condition is true.

unique-id() : Returns a unique CSS identifier.

Adding Custom Functions

New Sass functions can be added by adding Ruby methods to this module. For example:

module Sass::Script::Functions
  def reverse(string)
    assert_type string, :String
    Sass::Script::Value::String.new(string.value.reverse)
  end
  declare :reverse, [:string]
end

Calling Functions.declare tells Sass the argument names for your function. If omitted, the function will still work, but will not be able to accept keyword arguments. Functions.declare can also allow your function to take arbitrary keyword arguments.

There are a few things to keep in mind when modifying this module. First of all, the arguments passed are Value objects. Value objects are also expected to be returned. This means that Ruby values must be unwrapped and wrapped.

Most Value objects support the value accessor for getting their Ruby values. Color objects, though, must be accessed using rgb, red, green, or blue.

Second, making Ruby functions accessible from Sass introduces the temptation to do things like database access within stylesheets. This is generally a bad idea; since Sass files are by default only compiled once, dynamic code is not a great fit.

If you really, really need to compile Sass on each request, first make sure you have adequate caching set up. Then you can use Engine to render the code, using the options parameter to pass in data that can be accessed from your Sass functions.

Within one of the functions in this module, methods of EvaluationContext can be used.

Caveats

When creating new Value objects within functions, be aware that it's not safe to call #to_s (or other methods that use the string representation) on those objects without first setting the #options attribute.

Defined Under Namespace

Classes: EvaluationContext, Signature

Class Method Summary collapse

Instance Method Summary collapse

Class Method Details

.declare(method_name, args, options = {})

Declare a Sass signature for a Ruby-defined function. This includes the names of the arguments, whether the function takes a variable number of arguments, and whether the function takes an arbitrary set of keyword arguments.

It's not necessary to declare a signature for a function. However, without a signature it won't support keyword arguments.

A single function can have multiple signatures declared as long as each one takes a different number of arguments. It's also possible to declare multiple signatures that all take the same number of arguments, but none of them but the first will be used unless the user uses keyword arguments.

Examples:

declare :rgba, [:hex, :alpha]
declare :rgba, [:red, :green, :blue, :alpha]
declare :accepts_anything, [], :var_args => true, :var_kwargs => true
declare :some_func, [:foo, :bar, :baz], :var_kwargs => true

Parameters:

  • method_name (Symbol) —

    The name of the method whose signature is being declared.

  • args (Array<Symbol>) —

    The names of the arguments for the function signature.

  • options (Hash) (defaults to: {}) —

    a customizable set of options

Options Hash (options):

  • :var_args (Boolean) — default: false —

    Whether the function accepts a variable number of (unnamed) arguments in addition to the named arguments.

  • :var_kwargs (Boolean) — default: false —

    Whether the function accepts other keyword arguments in addition to those in :args. If this is true, the Ruby function will be passed a hash from strings to Values as the last argument. In addition, if this is true and :var_args is not, Sass will ensure that the last argument passed is a hash.



396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
 
# File 'lib/sass/script/functions.rb', line 396

def self.declare(method_name, args, options = {})
  delayed_args = []
  args = args.map do |a|
    a = a.to_s
    if a[0] == ?&
      a = a[1..-1]
      delayed_args << a
    end
    a
  end
  # We don't expose this functionality except to certain builtin methods.
  if delayed_args.any? && method_name != :if
    raise ArgumentError.new("Delayed arguments are not allowed for method #{method_name}")
  end
  @signatures[method_name] ||= []
  @signatures[method_name] << Signature.new(
    args,
    delayed_args,
    options[:var_args],
    options[:var_kwargs],
    options[:deprecated] && options[:deprecated].map {|a| a.to_s})
end

.random_number_generator ⇒ Random

Get Sass's internal random number generator.

Returns:

  • (Random) 


470
471
472
 
# File 'lib/sass/script/functions.rb', line 470

def self.random_number_generator
  @random_number_generator ||= Sass::Util::CrossPlatformRandom.new
end

.random_seed=(seed) ⇒ Integer

Sets the random seed used by Sass's internal random number generator.

This can be used to ensure consistent random number sequences which allows for consistent results when testing, etc.

Parameters:

  • seed (Integer)

Returns:

  • (Integer) —

    The same seed.



463
464
465
 
# File 'lib/sass/script/functions.rb', line 463

def self.random_seed=(seed)
  @random_number_generator = Sass::Util::CrossPlatformRandom.new(seed)
end

.signature(method_name, arg_arity, kwarg_arity) ⇒ {Symbol => Object}?

Determine the correct signature for the number of arguments passed in for a given function. If no signatures match, the first signature is returned for error messaging.

Parameters:

  • method_name (Symbol) —

    The name of the Ruby function to be called.

  • arg_arity (Fixnum) —

    The number of unnamed arguments the function was passed.

  • kwarg_arity (Fixnum) —

    The number of keyword arguments the function was passed.

Returns:

  • ({Symbol => Object}, nil) —

    The signature options for the matching signature, or nil if no signatures are declared for this function. See declare.



430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
 
# File 'lib/sass/script/functions.rb', line 430

def self.signature(method_name, arg_arity, kwarg_arity)
  return unless @signatures[method_name]
  @signatures[method_name].each do |signature|
    sig_arity = signature.args.size
    return signature if sig_arity == arg_arity + kwarg_arity
    next unless sig_arity < arg_arity + kwarg_arity

    # We have enough args.
    # Now we need to figure out which args are varargs
    # and if the signature allows them.
    t_arg_arity, t_kwarg_arity = arg_arity, kwarg_arity
    if sig_arity > t_arg_arity
      # we transfer some kwargs arity to args arity
      # if it does not have enough args -- assuming the names will work out.
      t_kwarg_arity -= (sig_arity - t_arg_arity)
      t_arg_arity = sig_arity
    end

    if   (t_arg_arity == sig_arity ||   t_arg_arity > sig_arity && signature.var_args) &&
       (t_kwarg_arity == 0         || t_kwarg_arity > 0         && signature.var_kwargs)
      return signature
    end
  end
  @signatures[method_name].first
end

Instance Method Details

#abs($number) ⇒ Sass::Script::Value::Number

Returns the absolute value of a number.

Examples:

abs(10px) => 10px
abs(-10px) => 10px

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $number isn't a number



1741
1742
1743
 
# File 'lib/sass/script/functions.rb', line 1741

def abs(number)
  numeric_transformation(number) {|n| n.abs}
end

#adjust_color($color, [$red], [$green], [$blue], [$hue], [$saturation], [$lightness], [$alpha]) ⇒ Sass::Script::Value::Color

Increases or decreases one or more properties of a color. This can change the red, green, blue, hue, saturation, value, and alpha properties. The properties are specified as keyword arguments, and are added to or subtracted from the color's current value for that property.

All properties are optional. You can't specify both RGB properties ($red, $green, $blue) and HSL properties ($hue, $saturation, $value) at the same time.

Examples:

adjust-color(#102030, $blue: 5) => #102035
adjust-color(#102030, $red: -5, $blue: 5) => #0b2035
adjust-color(hsl(25, 100%, 80%), $lightness: -30%, $alpha: -0.4) => hsla(25, 100%, 50%, 0.6)

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if any parameter is the wrong type or out-of bounds, or if RGB properties and HSL properties are adjusted at the same time



1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
 
# File 'lib/sass/script/functions.rb', line 1098

def adjust_color(color, kwargs)
  assert_type color, :Color, :color
  with = Sass::Util.map_hash(
      "red" => [-255..255, ""],
      "green" => [-255..255, ""],
      "blue" => [-255..255, ""],
      "hue" => nil,
      "saturation" => [-100..100, "%"],
      "lightness" => [-100..100, "%"],
      "alpha" => [-1..1, ""]
    ) do |name, (range, units)|

    val = kwargs.delete(name)
    next unless val
    assert_type val, :Number, name
    Sass::Util.check_range("$#{name}: Amount", range, val, units) if range
    adjusted = color.send(name) + val.value
    adjusted = [0, Sass::Util.restrict(adjusted, range)].max if range
    [name.to_sym, adjusted]
  end

  unless kwargs.empty?
    name, val = kwargs.to_a.first
    raise ArgumentError.new("Unknown argument $#{name} (#{val})")
  end

  color.with(with)
end

#adjust_hue($color, $degrees) ⇒ Sass::Script::Value::Color

Changes the hue of a color. Takes a color and a number of degrees (usually between -360deg and 360deg), and returns a color with the hue rotated along the color wheel by that amount.

Examples:

adjust-hue(hsl(120, 30%, 90%), 60deg) => hsl(180, 30%, 90%)
adjust-hue(hsl(120, 30%, 90%), -60deg) => hsl(60, 30%, 90%)
adjust-hue(#811, 45deg) => #886a11

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if either parameter is the wrong type



1036
1037
1038
1039
1040
 
# File 'lib/sass/script/functions.rb', line 1036

def adjust_hue(color, degrees)
  assert_type color, :Color, :color
  assert_type degrees, :Number, :degrees
  color.with(:hue => color.hue + degrees.value)
end

#alpha($color) ⇒ Sass::Script::Value::Number

Returns the alpha component (opacity) of a color. This is 1 unless otherwise specified.

This function also supports the proprietary Microsoft alpha(opacity=20) syntax as a special case.

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $color isn't a color



866
867
868
869
870
871
872
873
874
875
876
877
878
879
 
# File 'lib/sass/script/functions.rb', line 866

def alpha(*args)
  if args.all? do |a|
       a.is_a?(Sass::Script::Value::String) && a.type == :identifier &&
         a.value =~ /^[a-zA-Z]+\s*=/
     end
    # Support the proprietary MS alpha() function
    return identifier("alpha(#{args.map {|a| a.to_s}.join(", ")})")
  end

  raise ArgumentError.new("wrong number of arguments (#{args.size} for 1)") if args.size != 1

  assert_type args.first, :Color, :color
  number(args.first.alpha)
end

#append($list, $val, $separator: auto) ⇒ Sass::Script::Value::List

Appends a single value onto the end of a list.

Unless the $separator argument is passed, if the list had only one item, the resulting list will be space-separated.

Examples:

append(10px 20px, 30px) => 10px 20px 30px
append((blue, red), green) => blue, red, green
append(10px 20px, 30px 40px) => 10px 20px (30px 40px)
append(10px, 20px, comma) => 10px, 20px
append((blue, red), green, space) => blue red green

Parameters:

Returns:



1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
 
# File 'lib/sass/script/functions.rb', line 1909

def append(list, val, separator = identifier("auto"))
  assert_type separator, :String, :separator
  unless %w[auto space comma].include?(separator.value)
    raise ArgumentError.new("Separator name must be space, comma, or auto")
  end
  sep = if separator.value == 'auto'
          list.separator || :space
        else
          separator.value.to_sym
        end
  list(list.to_a + [val], sep)
end

#blue($color) ⇒ Sass::Script::Value::Number

Gets the blue component of a color. Calculated from HSL where necessary via this algorithm.

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $color isn't a color



796
797
798
799
 
# File 'lib/sass/script/functions.rb', line 796

def blue(color)
  assert_type color, :Color, :color
  number(color.blue)
end

#call($name, $args...)

Dynamically calls a function. This can call user-defined functions, built-in functions, or plain CSS functions. It will pass along all arguments, including keyword arguments, to the called function.

Examples:

call(rgb, 10, 100, 255) => #0a64ff
call(scale-color, #0a64ff, $lightness: -10%) => #0058ef

$fn: nth;
call($fn, (a b c), 2) => b

Parameters:

  • $name (String) —

    The name of the function to call.



2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
 
# File 'lib/sass/script/functions.rb', line 2171

def call(name, *args)
  assert_type name, :String, :name
  kwargs = args.last.is_a?(Hash) ? args.pop : {}
  funcall = Sass::Script::Tree::Funcall.new(
    name.value,
    args.map {|a| Sass::Script::Tree::Literal.new(a)},
    Sass::Util.map_vals(kwargs) {|v| Sass::Script::Tree::Literal.new(v)},
    nil,
    nil)
  funcall.options = options
  perform(funcall)
end

#ceil($number) ⇒ Sass::Script::Value::Number

Rounds a number up to the next whole number.

Examples:

ceil(10.4px) => 11px
ceil(10.6px) => 11px

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $number isn't a number



1713
1714
1715
 
# File 'lib/sass/script/functions.rb', line 1713

def ceil(number)
  numeric_transformation(number) {|n| n.ceil}
end

#change_color($color, [$red], [$green], [$blue], [$hue], [$saturation], [$lightness], [$alpha]) ⇒ Sass::Script::Value::Color

Changes one or more properties of a color. This can change the red, green, blue, hue, saturation, value, and alpha properties. The properties are specified as keyword arguments, and replace the color's current value for that property.

All properties are optional. You can't specify both RGB properties ($red, $green, $blue) and HSL properties ($hue, $saturation, $value) at the same time.

Examples:

change-color(#102030, $blue: 5) => #102005
change-color(#102030, $red: 120, $blue: 5) => #782005
change-color(hsl(25, 100%, 80%), $lightness: 40%, $alpha: 0.8) => hsla(25, 100%, 40%, 0.8)

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if any parameter is the wrong type or out-of bounds, or if RGB properties and HSL properties are adjusted at the same time



1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
 
# File 'lib/sass/script/functions.rb', line 1240

def change_color(color, kwargs)
  assert_type color, :Color, :color
  with = Sass::Util.map_hash(
    'red' => ['Red value', 0..255],
    'green' => ['Green value', 0..255],
    'blue' => ['Blue value', 0..255],
    'hue' => [],
    'saturation' => ['Saturation', 0..100, '%'],
    'lightness' => ['Lightness', 0..100, '%'],
    'alpha' => ['Alpha channel', 0..1]
  ) do |name, (desc, range, unit)|
    val = kwargs.delete(name)
    next unless val
    assert_type val, :Number, name

    if range
      val = Sass::Util.check_range(desc, range, val, unit)
    else
      val = val.value
    end

    [name.to_sym, val]
  end

  unless kwargs.empty?
    name, val = kwargs.to_a.first
    raise ArgumentError.new("Unknown argument $#{name} (#{val})")
  end

  color.with(with)
end

#comparable($number1, $number2) ⇒ Sass::Script::Value::Bool

Returns whether two numbers can added, subtracted, or compared.

Examples:

comparable(2px, 1px) => true
comparable(100px, 3em) => false
comparable(10cm, 3mm) => true

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if either parameter is the wrong type



1666
1667
1668
1669
1670
 
# File 'lib/sass/script/functions.rb', line 1666

def comparable(number1, number2)
  assert_type number1, :Number, :number1
  assert_type number2, :Number, :number2
  bool(number1.comparable_to?(number2))
end

#complement($color) ⇒ Sass::Script::Value::Color

Returns the complement of a color. This is identical to adjust-hue(color, 180deg).

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $color isn't a color

See Also:



1359
1360
1361
 
# File 'lib/sass/script/functions.rb', line 1359

def complement(color)
  adjust_hue color, number(180)
end

#counter($args...) ⇒ Sass::Script::Value::String

This function only exists as a workaround for IE7's content: counter bug. It works identically to any other plain-CSS function, except it avoids adding spaces between the argument commas.

Examples:

counter(item, ".") => counter(item,".")

Returns:



2194
2195
2196
 
# File 'lib/sass/script/functions.rb', line 2194

def counter(*args)
  identifier("counter(#{args.map {|a| a.to_s(options)}.join(',')})")
end

#counters($args...) ⇒ Sass::Script::Value::String

This function only exists as a workaround for IE7's content: counter bug. It works identically to any other plain-CSS function, except it avoids adding spaces between the argument commas.

Examples:

counters(item, ".") => counters(item,".")

Returns:



2208
2209
2210
 
# File 'lib/sass/script/functions.rb', line 2208

def counters(*args)
  identifier("counters(#{args.map {|a| a.to_s(options)}.join(',')})")
end

#darken($color, $amount) ⇒ Sass::Script::Value::Color

Makes a color darker. Takes a color and a number between 0% and 100%, and returns a color with the lightness decreased by that amount.

Examples:

darken(hsl(25, 100%, 80%), 30%) => hsl(25, 100%, 50%)
darken(#800, 20%) => #200

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $amount is out of bounds, or either parameter is the wrong type

See Also:



975
976
977
 
# File 'lib/sass/script/functions.rb', line 975

def darken(color, amount)
  _adjust(color, amount, :lightness, 0..100, :-, "%")
end

#desaturate($color, $amount) ⇒ Sass::Script::Value::Color

Makes a color less saturated. Takes a color and a number between 0% and 100%, and returns a color with the saturation decreased by that value.

Examples:

desaturate(hsl(120, 30%, 90%), 20%) => hsl(120, 10%, 90%)
desaturate(#855, 20%) => #726b6b

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $amount is out of bounds, or either parameter is the wrong type

See Also:



1017
1018
1019
 
# File 'lib/sass/script/functions.rb', line 1017

def desaturate(color, amount)
  _adjust(color, amount, :saturation, 0..100, :-, "%")
end

#feature_exists($feature) ⇒ Sass::Script::Value::Bool

Returns whether a feature exists in the current Sass runtime.

The following features are supported:

  • global-variable-shadowing indicates that a local variable will shadow a global variable unless !global is used.

  • extend-selector-pseudoclass indicates that @extend will reach into selector pseudoclasses like :not.

  • units-level-3 indicates full support for unit arithmetic using units defined in the Values and Units Level 3 spec.

  • at-error indicates that the Sass @error directive is supported.

Examples:

feature-exists(some-feature-that-exists) => true
feature-exists(what-is-this-i-dont-know) => false

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $feature isn't a string



1614
1615
1616
1617
 
# File 'lib/sass/script/functions.rb', line 1614

def feature_exists(feature)
  assert_type feature, :String, :feature
  bool(Sass.has_feature?(feature.value))
end

#floor($number) ⇒ Sass::Script::Value::Number

Rounds a number down to the previous whole number.

Examples:

floor(10.4px) => 10px
floor(10.6px) => 10px

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $number isn't a number



1727
1728
1729
 
# File 'lib/sass/script/functions.rb', line 1727

def floor(number)
  numeric_transformation(number) {|n| n.floor}
end

#function_exists($name) ⇒ Sass::Script::Value::Bool

Check whether a function with the given name exists.

Examples:

function-exists(lighten) => true

@function myfunc { @return "something"; }
function-exists(myfunc) => true

Parameters:

Returns:



2268
2269
2270
2271
2272
2273
 
# File 'lib/sass/script/functions.rb', line 2268

def function_exists(name)
  assert_type name, :String, :name
  exists = Sass::Script::Functions.callable?(name.value.tr("-", "_"))
  exists ||= environment.function(name.value)
  bool(exists)
end

#global_variable_exists($name) ⇒ Sass::Script::Value::Bool

Check whether a variable with the given name exists in the global scope (at the top level of the file).

Examples:

$a-false-value: false;
global-variable-exists(a-false-value) => true

.foo {
  $some-var: false;
  @if global-variable-exists(some-var) { /* false, doesn't run */ }
}

Parameters:

Returns:



2250
2251
2252
2253
 
# File 'lib/sass/script/functions.rb', line 2250

def global_variable_exists(name)
  assert_type name, :String, :name
  bool(environment.global_env.var(name.value))
end

#grayscale($color) ⇒ Sass::Script::Value::Color

Converts a color to grayscale. This is identical to desaturate(color, 100%).

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $color isn't a color

See Also:



1343
1344
1345
1346
1347
1348
 
# File 'lib/sass/script/functions.rb', line 1343

def grayscale(color)
  if color.is_a?(Sass::Script::Value::Number)
    return identifier("grayscale(#{color})")
  end
  desaturate color, number(100)
end

#green($color) ⇒ Sass::Script::Value::Number

Gets the green component of a color. Calculated from HSL where necessary via this algorithm.

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $color isn't a color



780
781
782
783
 
# File 'lib/sass/script/functions.rb', line 780

def green(color)
  assert_type color, :Color, :color
  number(color.green)
end

#hsl($hue, $saturation, $lightness) ⇒ Sass::Script::Value::Color

Creates a Color from hue, saturation, and lightness values. Uses the algorithm from the CSS3 spec.

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $saturation or $lightness are out of bounds or any parameter is the wrong type

See Also:



712
713
714
 
# File 'lib/sass/script/functions.rb', line 712

def hsl(hue, saturation, lightness)
  hsla(hue, saturation, lightness, number(1))
end

#hsla($hue, $saturation, $lightness, $alpha) ⇒ Sass::Script::Value::Color

Creates a Color from hue, saturation, lightness, and alpha values. Uses the algorithm from the CSS3 spec.

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $saturation, $lightness, or $alpha are out of bounds or any parameter is the wrong type

See Also:



736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
 
# File 'lib/sass/script/functions.rb', line 736

def hsla(hue, saturation, lightness, alpha)
  assert_type hue, :Number, :hue
  assert_type saturation, :Number, :saturation
  assert_type lightness, :Number, :lightness
  assert_type alpha, :Number, :alpha

  h = hue.value
  s = saturation.value
  l = lightness.value

  # Don't store the string representation for function-created colors, both
  # because it's not very useful and because some functions aren't supported
  # on older browsers.
  Sass::Script::Value::Color.new(
    :hue => h, :saturation => s, :lightness => l, :alpha => alpha.value)
end

#hue($color) ⇒ Sass::Script::Value::Number

Returns the hue component of a color. See the CSS3 HSL specification. Calculated from RGB where necessary via this algorithm.

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $color isn't a color



814
815
816
817
 
# File 'lib/sass/script/functions.rb', line 814

def hue(color)
  assert_type color, :Color, :color
  number(color.hue, "deg")
end

#ie_hex_str($color) ⇒ Sass::Script::Value::String

Converts a color into the format understood by IE filters.

Examples:

ie-hex-str(#abc) => #FFAABBCC
ie-hex-str(#3322BB) => #FF3322BB
ie-hex-str(rgba(0, 255, 0, 0.5)) => #8000FF00

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $color isn't a color



1054
1055
1056
1057
1058
 
# File 'lib/sass/script/functions.rb', line 1054

def ie_hex_str(color)
  assert_type color, :Color, :color
  alpha = (color.alpha * 255).round.to_s(16).rjust(2, '0')
  identifier("##{alpha}#{color.send(:hex_str)[1..-1]}".upcase)
end

#if($condition, $if-true, $if-false) ⇒ Sass::Script::Value::Base

Returns one of two values, depending on whether or not $condition is true. Just like in @if, all values other than false and null are considered to be true.

Examples:

if(true, 1px, 2px) => 1px
if(false, 1px, 2px) => 2px

Parameters:

Returns:



2132
2133
2134
2135
2136
2137
2138
 
# File 'lib/sass/script/functions.rb', line 2132

def if(condition, if_true, if_false)
  if condition.to_bool
    perform(if_true)
  else
    perform(if_false)
  end
end

#index($list, $value) ⇒ Sass::Script::Value::Number, Sass::Script::Value::Null

Returns the position of a value within a list. If the value isn't found, returns null instead.

Note that unlike some languages, the first item in a Sass list is number 1, the second number 2, and so forth.

This can return the position of a pair in a map as well.

Examples:

index(1px solid red, solid) => 2
index(1px solid red, dashed) => null
index((width: 10px, height: 20px), (height 20px)) => 2

Parameters:

Returns:



1970
1971
1972
1973
 
# File 'lib/sass/script/functions.rb', line 1970

def index(list, value)
  index = list.to_a.index {|e| e.eq(value).to_bool}
  index ? number(index + 1) : null
end

#inspect($value) ⇒ Sass::Script::Value::String

Return a string containing the value as its Sass representation.

Parameters:

Returns:



2300
2301
2302
 
# File 'lib/sass/script/functions.rb', line 2300

def inspect(value)
  unquoted_string(value.to_sass)
end

#invert($color) ⇒ Sass::Script::Value::Color

Returns the inverse (negative) of a color. The red, green, and blue values are inverted, while the opacity is left alone.

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $color isn't a color



1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
 
# File 'lib/sass/script/functions.rb', line 1371

def invert(color)
  if color.is_a?(Sass::Script::Value::Number)
    return identifier("invert(#{color})")
  end

  assert_type color, :Color, :color
  color.with(
    :red => (255 - color.red),
    :green => (255 - color.green),
    :blue => (255 - color.blue))
end

#is_superselector($super, $sub) ⇒ Sass::Script::Value::Bool

Returns whether $super is a superselector of $sub. This means that $super matches all the elements that $sub matches, as well as possibly additional elements. In general, simpler selectors tend to be superselectors of more complex oned.

Examples:

is-superselector(".foo", ".foo.bar") => true
is-superselector(".foo.bar", ".foo") => false
is-superselector(".bar", ".foo .bar") => true
is-superselector(".foo .bar", ".bar") => false

Returns Whether $selector1 is a superselector of $selector2.

Parameters:

Returns:



2597
2598
2599
2600
2601
 
# File 'lib/sass/script/functions.rb', line 2597

def is_superselector(sup, sub)
  sup = parse_selector(sup, :super)
  sub = parse_selector(sub, :sub)
  bool(sup.superselector?(sub))
end

#join($list1, $list2, $separator: auto) ⇒ Sass::Script::Value::List

Joins together two lists into one.

Unless $separator is passed, if one list is comma-separated and one is space-separated, the first parameter's separator is used for the resulting list. If both lists have fewer than two items, spaces are used for the resulting list.

Examples:

join(10px 20px, 30px 40px) => 10px 20px 30px 40px
join((blue, red), (#abc, #def)) => blue, red, #abc, #def
join(10px, 20px) => 10px 20px
join(10px, 20px, comma) => 10px, 20px
join((blue, red), (#abc, #def), space) => blue red #abc #def

Parameters:

Returns:



1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
 
# File 'lib/sass/script/functions.rb', line 1876

def join(list1, list2, separator = identifier("auto"))
  assert_type separator, :String, :separator
  unless %w[auto space comma].include?(separator.value)
    raise ArgumentError.new("Separator name must be space, comma, or auto")
  end
  sep = if separator.value == 'auto'
          list1.separator || list2.separator || :space
        else
          separator.value.to_sym
        end
  list(list1.to_a + list2.to_a, sep)
end

#keywords($args) ⇒ Sass::Script::Value::Map

Returns the map of named arguments passed to a function or mixin that takes a variable argument list. The argument names are strings, and they do not contain the leading $.

Examples:

@mixin foo($args...) {
  @debug keywords($args); //=> (arg1: val, arg2: val)
}

@include foo($arg1: val, $arg2: val);

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $args isn't a variable argument list



2113
2114
2115
2116
 
# File 'lib/sass/script/functions.rb', line 2113

def keywords(args)
  assert_type args, :ArgList, :args
  map(Sass::Util.map_keys(args.keywords.as_stored) {|k| Sass::Script::Value::String.new(k)})
end

#length($list) ⇒ Sass::Script::Value::Number

Return the length of a list.

This can return the number of pairs in a map as well.

Examples:

length(10px) => 1
length(10px 20px 30px) => 3
length((width: 10px, height: 20px)) => 2

Parameters:

Returns:



1791
1792
1793
 
# File 'lib/sass/script/functions.rb', line 1791

def length(list)
  number(list.to_a.size)
end

#lighten($color, $amount) ⇒ Sass::Script::Value::Color

Makes a color lighter. Takes a color and a number between 0% and 100%, and returns a color with the lightness increased by that amount.

Examples:

lighten(hsl(0, 0%, 0%), 30%) => hsl(0, 0, 30)
lighten(#800, 20%) => #e00

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $amount is out of bounds, or either parameter is the wrong type

See Also:



956
957
958
 
# File 'lib/sass/script/functions.rb', line 956

def lighten(color, amount)
  _adjust(color, amount, :lightness, 0..100, :+, "%")
end

#lightness($color) ⇒ Sass::Script::Value::Number

Returns the lightness component of a color. See the CSS3 HSL specification. Calculated from RGB where necessary via this algorithm.

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $color isn't a color



850
851
852
853
 
# File 'lib/sass/script/functions.rb', line 850

def lightness(color)
  assert_type color, :Color, :color
  number(color.lightness, "%")
end

#list_separator($list) ⇒ Sass::Script::Value::String

Returns the separator of a list. If the list doesn't have a separator due to having fewer than two elements, returns space.

Examples:

list-separator(1px 2px 3px) => space
list-separator(1px, 2px, 3px) => comma
list-separator('foo') => space

Parameters:

Returns:



1986
1987
1988
 
# File 'lib/sass/script/functions.rb', line 1986

def list_separator(list)
  identifier((list.separator || :space).to_s)
end

#map_get($map, $key) ⇒ Sass::Script::Value::Base

Returns the value in a map associated with the given key. If the map doesn't have such a key, returns null.

Examples:

map-get(("foo": 1, "bar": 2), "foo") => 1
map-get(("foo": 1, "bar": 2), "bar") => 2
map-get(("foo": 1, "bar": 2), "baz") => null

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $map is not a map



2004
2005
2006
2007
 
# File 'lib/sass/script/functions.rb', line 2004

def map_get(map, key)
  assert_type map, :Map, :map
  map.to_h[key] || null
end

#map_has_key($map, $key) ⇒ Sass::Script::Value::Bool

Returns whether a map has a value associated with a given key.

Examples:

map-has-key(("foo": 1, "bar": 2), "foo") => true
map-has-key(("foo": 1, "bar": 2), "baz") => false

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $map is not a map



2093
2094
2095
2096
 
# File 'lib/sass/script/functions.rb', line 2093

def map_has_key(map, key)
  assert_type map, :Map, :map
  bool(map.to_h.has_key?(key))
end

#map_keys($map) ⇒ List

Returns a list of all keys in a map.

Examples:

map-keys(("foo": 1, "bar": 2)) => "foo", "bar"

Parameters:

  • $map (Map)

Returns:

  • (List) —

    the list of keys, comma-separated

Raises:

  • (ArgumentError) —

    if $map is not a map



2061
2062
2063
2064
 
# File 'lib/sass/script/functions.rb', line 2061

def map_keys(map)
  assert_type map, :Map, :map
  list(map.to_h.keys, :comma)
end

#map_merge($map1, $map2) ⇒ Sass::Script::Value::Map

Merges two maps together into a new map. Keys in $map2 will take precedence over keys in $map1.

This is the best way to add new values to a map.

All keys in the returned map that also appear in $map1 will have the same order as in $map1. New keys from $map2 will be placed at the end of the map.

Examples:

map-merge(("foo": 1), ("bar": 2)) => ("foo": 1, "bar": 2)
map-merge(("foo": 1, "bar": 2), ("bar": 3)) => ("foo": 1, "bar": 3)

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if either parameter is not a map



2027
2028
2029
2030
2031
 
# File 'lib/sass/script/functions.rb', line 2027

def map_merge(map1, map2)
  assert_type map1, :Map, :map1
  assert_type map2, :Map, :map2
  map(map1.to_h.merge(map2.to_h))
end

#map_remove($map, $keys...) ⇒ Sass::Script::Value::Map

Returns a new map with keys removed.

Examples:

map-remove(("foo": 1, "bar": 2), "bar") => ("foo": 1)
map-remove(("foo": 1, "bar": 2, "baz": 3), "bar", "baz") => ("foo": 1)
map-remove(("foo": 1, "bar": 2), "baz") => ("foo": 1, "bar": 2)

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $map is not a map



2045
2046
2047
2048
2049
2050
 
# File 'lib/sass/script/functions.rb', line 2045

def map_remove(map, *keys)
  assert_type map, :Map, :map
  hash = map.to_h.dup
  hash.delete_if {|key, _| keys.include?(key)}
  map(hash)
end

#map_values($map) ⇒ List

Returns a list of all values in a map. This list may include duplicate values, if multiple keys have the same value.

Examples:

map-values(("foo": 1, "bar": 2)) => 1, 2
map-values(("foo": 1, "bar": 2, "baz": 1)) => 1, 2, 1

Parameters:

  • $map (Map)

Returns:

  • (List) —

    the list of values, comma-separated

Raises:

  • (ArgumentError) —

    if $map is not a map



2077
2078
2079
2080
 
# File 'lib/sass/script/functions.rb', line 2077

def map_values(map)
  assert_type map, :Map, :map
  list(map.to_h.values, :comma)
end

#max($numbers...) ⇒ Sass::Script::Value::Number

Finds the maximum of several numbers. This function takes any number of arguments.

Examples:

max(1px, 4px) => 4px
max(5em, 3em, 4em) => 5em

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if any argument isn't a number, or if not all of the arguments have comparable units



1774
1775
1776
1777
 
# File 'lib/sass/script/functions.rb', line 1774

def max(*values)
  values.each {|v| assert_type v, :Number}
  values.inject {|max, val| max.gt(val).to_bool ? max : val}
end

#min($numbers...) ⇒ Sass::Script::Value::Number

Finds the minimum of several numbers. This function takes any number of arguments.

Examples:

min(1px, 4px) => 1px
min(5em, 3em, 4em) => 3em

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if any argument isn't a number, or if not all of the arguments have comparable units



1757
1758
1759
1760
 
# File 'lib/sass/script/functions.rb', line 1757

def min(*numbers)
  numbers.each {|n| assert_type n, :Number}
  numbers.inject {|min, num| min.lt(num).to_bool ? min : num}
end

#mix($color1, $color2, $weight: 50%) ⇒ Sass::Script::Value::Color

Mixes two colors together. Specifically, takes the average of each of the RGB components, optionally weighted by the given percentage. The opacity of the colors is also considered when weighting the components.

The weight specifies the amount of the first color that should be included in the returned color. The default, 50%, means that half the first color and half the second color should be used. 25% means that a quarter of the first color and three quarters of the second color should be used.

Examples:

mix(#f00, #00f) => #7f007f
mix(#f00, #00f, 25%) => #3f00bf
mix(rgba(255, 0, 0, 0.5), #00f) => rgba(63, 0, 191, 0.75)

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $weight is out of bounds or any parameter is the wrong type



1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
 
# File 'lib/sass/script/functions.rb', line 1295

def mix(color1, color2, weight = number(50))
  assert_type color1, :Color, :color1
  assert_type color2, :Color, :color2
  assert_type weight, :Number, :weight

  Sass::Util.check_range("Weight", 0..100, weight, '%')

  # This algorithm factors in both the user-provided weight (w) and the
  # difference between the alpha values of the two colors (a) to decide how
  # to perform the weighted average of the two RGB values.
  #
  # It works by first normalizing both parameters to be within [-1, 1],
  # where 1 indicates "only use color1", -1 indicates "only use color2", and
  # all values in between indicated a proportionately weighted average.
  #
  # Once we have the normalized variables w and a, we apply the formula
  # (w + a)/(1 + w*a) to get the combined weight (in [-1, 1]) of color1.
  # This formula has two especially nice properties:
  #
  #   * When either w or a are -1 or 1, the combined weight is also that number
  #     (cases where w * a == -1 are undefined, and handled as a special case).
  #
  #   * When a is 0, the combined weight is w, and vice versa.
  #
  # Finally, the weight of color1 is renormalized to be within [0, 1]
  # and the weight of color2 is given by 1 minus the weight of color1.
  p = (weight.value / 100.0).to_f
  w = p * 2 - 1
  a = color1.alpha - color2.alpha

  w1 = ((w * a == -1 ? w : (w + a) / (1 + w * a)) + 1) / 2.0
  w2 = 1 - w1

  rgba = color1.rgb.zip(color2.rgb).map {|v1, v2| v1 * w1 + v2 * w2}
  rgba << color1.alpha * p + color2.alpha * (1 - p)
  rgb_color(*rgba)
end

#mixin_exists($name) ⇒ Sass::Script::Value::Bool

Check whether a mixin with the given name exists.

Examples:

mixin-exists(nonexistent) => false

@mixin red-text { color: red; }
mixin-exists(red-text) => true

Parameters:

Returns:



2288
2289
2290
2291
 
# File 'lib/sass/script/functions.rb', line 2288

def mixin_exists(name)
  assert_type name, :String, :name
  bool(environment.mixin(name.value))
end

#nth($list, $n) ⇒ Sass::Script::Value::Base

Gets the nth item in a list.

Note that unlike some languages, the first item in a Sass list is number 1, the second number 2, and so forth.

This can return the nth pair in a map as well.

Negative index values address elements in reverse order, starting with the last element in the list.

Examples:

nth(10px 20px 30px, 1) => 10px
nth((Helvetica, Arial, sans-serif), 3) => sans-serif
nth((width: 10px, length: 20px), 2) => length, 20px

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $n isn't an integer between 1 and the length of $list



1847
1848
1849
1850
1851
1852
1853
 
# File 'lib/sass/script/functions.rb', line 1847

def nth(list, n)
  assert_type n, :Number, :n
  Sass::Script::Value::List.assert_valid_index(list, n)

  index = n.to_i > 0 ? n.to_i - 1 : n.to_i
  list.to_a[index]
end

#opacify($color, $amount) ⇒ Sass::Script::Value::Color Also known as: fade_in

Makes a color more opaque. Takes a color and a number between 0 and 1, and returns a color with the opacity increased by that amount.

Examples:

opacify(rgba(0, 0, 0, 0.5), 0.1) => rgba(0, 0, 0, 0.6)
opacify(rgba(0, 0, 17, 0.8), 0.2) => #001

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $amount is out of bounds, or either parameter is the wrong type

See Also:



912
913
914
 
# File 'lib/sass/script/functions.rb', line 912

def opacify(color, amount)
  _adjust(color, amount, :alpha, 0..1, :+)
end

#opacity($color) ⇒ Sass::Script::Value::Number

Returns the alpha component (opacity) of a color. This is 1 unless otherwise specified.

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $color isn't a color



889
890
891
892
893
894
895
 
# File 'lib/sass/script/functions.rb', line 889

def opacity(color)
  if color.is_a?(Sass::Script::Value::Number)
    return identifier("opacity(#{color})")
  end
  assert_type color, :Color, :color
  number(color.alpha)
end

#percentage($number) ⇒ Sass::Script::Value::Number

Converts a unitless number to a percentage.

Examples:

percentage(0.2) => 20%
percentage(100px / 50px) => 200%

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $number isn't a unitless number



1682
1683
1684
1685
1686
1687
 
# File 'lib/sass/script/functions.rb', line 1682

def percentage(number)
  unless number.is_a?(Sass::Script::Value::Number) && number.unitless?
    raise ArgumentError.new("$number: #{number.inspect} is not a unitless number")
  end
  number(number.value * 100, '%')
end

#quote($string) ⇒ Sass::Script::Value::String

Add quotes to a string if the string isn't quoted, or returns the same string if it is.

Examples:

quote("foo") => "foo"
quote(foo) => "foo"

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $string isn't a string

See Also:



1415
1416
1417
1418
1419
1420
1421
1422
 
# File 'lib/sass/script/functions.rb', line 1415

def quote(string)
  assert_type string, :String, :string
  if string.type != :string
    quoted_string(string.value)
  else
    string
  end
end

#random ⇒ Sass::Script::Value::Number #random($limit) ⇒ Sass::Script::Value::Number

Overloads:



2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
 
# File 'lib/sass/script/functions.rb', line 2314

def random(limit = nil)
  generator = Sass::Script::Functions.random_number_generator
  if limit
    assert_integer limit, "limit"
    if limit.value < 1
      raise ArgumentError.new("$limit #{limit} must be greater than or equal to 1")
    end
    number(1 + generator.rand(limit.value))
  else
    number(generator.rand)
  end
end

#red($color) ⇒ Sass::Script::Value::Number

Gets the red component of a color. Calculated from HSL where necessary via this algorithm.

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $color isn't a color



764
765
766
767
 
# File 'lib/sass/script/functions.rb', line 764

def red(color)
  assert_type color, :Color, :color
  number(color.red)
end

#rgb($red, $green, $blue) ⇒ Sass::Script::Value::Color

Creates a Color object from red, green, and blue values.

Parameters:

  • $red (Sass::Script::Value::Number) —

    The amount of red in the color. Must be between 0 and 255 inclusive, or between 0% and 100% inclusive

  • $green (Sass::Script::Value::Number) —

    The amount of green in the color. Must be between 0 and 255 inclusive, or between 0% and 100% inclusive

  • $blue (Sass::Script::Value::Number) —

    The amount of blue in the color. Must be between 0 and 255 inclusive, or between 0% and 100% inclusive

Returns:

Raises:

  • (ArgumentError) —

    if any parameter is the wrong type or out of bounds

See Also:



624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
 
# File 'lib/sass/script/functions.rb', line 624

def rgb(red, green, blue)
  assert_type red, :Number, :red
  assert_type green, :Number, :green
  assert_type blue, :Number, :blue

  color_attrs = [[red, :red], [green, :green], [blue, :blue]].map do |(c, name)|
    if c.is_unit?("%")
      c.value * 255 / 100.0
    elsif c.unitless?
      c.value
    else
      raise ArgumentError.new("Expected #{c} to be unitless or have a unit of % but got #{c}")
    end
  end

  # Don't store the string representation for function-created colors, both
  # because it's not very useful and because some functions aren't supported
  # on older browsers.
  Sass::Script::Value::Color.new(color_attrs)
end

#rgba($red, $green, $blue, $alpha) ⇒ Sass::Script::Value::Color #rgba($color, $alpha) ⇒ Sass::Script::Value::Color

Creates a Color from red, green, blue, and alpha values.

Overloads:

See Also:



677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
 
# File 'lib/sass/script/functions.rb', line 677

def rgba(*args)
  case args.size
  when 2
    color, alpha = args

    assert_type color, :Color, :color
    assert_type alpha, :Number, :alpha

    color.with(:alpha => alpha.value)
  when 4
    red, green, blue, alpha = args
    rgba(rgb(red, green, blue), alpha)
  else
    raise ArgumentError.new("wrong number of arguments (#{args.size} for 4)")
  end
end

#round($number) ⇒ Sass::Script::Value::Number

Rounds a number to the nearest whole number.

Examples:

round(10.4px) => 10px
round(10.6px) => 11px

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $number isn't a number



1699
1700
1701
 
# File 'lib/sass/script/functions.rb', line 1699

def round(number)
  numeric_transformation(number) {|n| n.round}
end

#saturate($color, $amount) ⇒ Sass::Script::Value::Color

Makes a color more saturated. Takes a color and a number between 0% and 100%, and returns a color with the saturation increased by that amount.

Examples:

saturate(hsl(120, 30%, 90%), 20%) => hsl(120, 50%, 90%)
saturate(#855, 20%) => #9e3f3f

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $amount is out of bounds, or either parameter is the wrong type

See Also:



994
995
996
997
998
999
 
# File 'lib/sass/script/functions.rb', line 994

def saturate(color, amount = nil)
  # Support the filter effects definition of saturate.
  # https://dvcs.w3.org/hg/FXTF/raw-file/tip/filters/index.html
  return identifier("saturate(#{color})") if amount.nil?
  _adjust(color, amount, :saturation, 0..100, :+, "%")
end

#saturation($color) ⇒ Sass::Script::Value::Number

Returns the saturation component of a color. See the CSS3 HSL specification. Calculated from RGB where necessary via this algorithm.

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $color isn't a color



832
833
834
835
 
# File 'lib/sass/script/functions.rb', line 832

def saturation(color)
  assert_type color, :Color, :color
  number(color.saturation, "%")
end

#scale_color($color, [$red], [$green], [$blue], [$saturation], [$lightness], [$alpha]) ⇒ Sass::Script::Value::Color

Fluidly scales one or more properties of a color. Unlike adjust-color, which changes a color's properties by fixed amounts, scale-color fluidly changes them based on how high or low they already are. That means that lightening an already-light color with scale-color won't change the lightness much, but lightening a dark color by the same amount will change it more dramatically. This has the benefit of making scale-color($color, ...) have a similar effect regardless of what $color is.

For example, the lightness of a color can be anywhere between 0% and 100%. If scale-color($color, $lightness: 40%) is called, the resulting color's lightness will be 40% of the way between its original lightness and 100. If scale-color($color, $lightness: -40%) is called instead, the lightness will be 40% of the way between the original and 0.

This can change the red, green, blue, saturation, value, and alpha properties. The properties are specified as keyword arguments. All arguments should be percentages between 0% and 100%.

All properties are optional. You can't specify both RGB properties ($red, $green, $blue) and HSL properties ($saturation, $value) at the same time.

Examples:

scale-color(hsl(120, 70%, 80%), $lightness: 50%) => hsl(120, 70%, 90%)
scale-color(rgb(200, 150%, 170%), $green: -40%, $blue: 70%) => rgb(200, 90, 229)
scale-color(hsl(200, 70%, 80%), $saturation: -90%, $alpha: -30%) => hsla(200, 7%, 80%, 0.7)

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if any parameter is the wrong type or out-of bounds, or if RGB properties and HSL properties are adjusted at the same time



1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
 
# File 'lib/sass/script/functions.rb', line 1171

def scale_color(color, kwargs)
  assert_type color, :Color, :color
  with = Sass::Util.map_hash(
      "red" => 255,
      "green" => 255,
      "blue" => 255,
      "saturation" => 100,
      "lightness" => 100,
      "alpha" => 1
    ) do |name, max|

    val = kwargs.delete(name)
    next unless val
    assert_type val, :Number, name
    assert_unit val, '%', name
    Sass::Util.check_range("$#{name}: Amount", -100..100, val, '%')

    current = color.send(name)
    scale = val.value / 100.0
    diff = scale > 0 ? max - current : current
    [name.to_sym, current + diff * scale]
  end

  unless kwargs.empty?
    name, val = kwargs.to_a.first
    raise ArgumentError.new("Unknown argument $#{name} (#{val})")
  end

  color.with(with)
end

#selector_append($selectors...) ⇒ Sass::Script::Value::List

Return a new selector with all selectors in $selectors appended one another as though they had been nested in the stylesheet as $selector1 { &$selector2 { ... } }.

Examples:

selector-append(".foo", ".bar", ".baz") => .foo.bar.baz
selector-append(".a .foo", ".b .bar") => "a .foo.b .bar"
selector-append(".foo", "-suffix") => ".foo-suffix"

Returns A list of lists of strings representing the result of appending $selectors. This is in the same format as a selector returned by &.

Parameters:

Returns:

  • (Sass::Script::Value::List) —

    A list of lists of strings representing the result of appending $selectors. This is in the same format as a selector returned by &.

Raises:

  • (ArgumentError) —

    if a selector could not be appended.



2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
 
# File 'lib/sass/script/functions.rb', line 2398

def selector_append(*selectors)
  if selectors.empty?
    raise ArgumentError.new("$selectors: At least one selector must be passed")
  end

  selectors.map {|sel| parse_selector(sel, :selectors)}.inject do |parent, child|
    child.members.each do |seq|
      sseq = seq.members.first
      unless sseq.is_a?(Sass::Selector::SimpleSequence)
        raise ArgumentError.new("Can't append \"#{seq}\" to \"#{parent}\"")
      end

      base = sseq.base
      case base
      when Sass::Selector::Universal
        raise ArgumentError.new("Can't append \"#{seq}\" to \"#{parent}\"")
      when Sass::Selector::Element
        unless base.namespace.nil?
          raise ArgumentError.new("Can't append \"#{seq}\" to \"#{parent}\"")
        end
        sseq.members[0] = Sass::Selector::Parent.new(base.name)
      else
        sseq.members.unshift Sass::Selector::Parent.new
      end
    end
    child.resolve_parent_refs(parent)
  end.to_sass_script
end

#selector_extend($selector, $extendee, $extender) ⇒ Sass::Script::Value::List

Returns a new version of $selector with $extendee extended with $extender. This works just like the result of

$selector { ... }
$extender { @extend $extendee }

Examples:

selector-extend(".a .b", ".b", ".foo .bar") => .a .b, .a .foo .bar, .foo .a .bar

Returns A list of lists of strings representing the result of the extension. This is in the same format as a selector returned by &.

Parameters:

Returns:

  • (Sass::Script::Value::List) —

    A list of lists of strings representing the result of the extension. This is in the same format as a selector returned by &.

Raises:

  • (ArgumentError) —

    if the extension fails



2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
 
# File 'lib/sass/script/functions.rb', line 2455

def selector_extend(selector, extendee, extender)
  selector = parse_selector(selector, :selector)
  extendee = parse_selector(extendee, :extendee)
  extender = parse_selector(extender, :extender)

  extends = Sass::Util::SubsetMap.new
  begin
    extender.populate_extends(extends, extendee)
    selector.do_extend(extends).to_sass_script
  rescue Sass::SyntaxError => e
    raise ArgumentError.new(e.to_s)
  end
end

#selector_nest($selectors...) ⇒ Sass::Script::Value::List

Return a new selector with all selectors in $selectors nested beneath one another as though they had been nested in the stylesheet as $selector1 { $selector2 { ... } }.

Unlike most selector functions, selector-nest allows the parent selector & to be used in any selector but the first.

Examples:

selector-nest(".foo", ".bar", ".baz") => .foo .bar .baz
selector-nest(".a .foo", ".b .bar") => .a .foo .b .bar
selector-nest(".foo", "&.bar") => .foo.bar

Returns A list of lists of strings representing the result of nesting $selectors. This is in the same format as a selector returned by &.

Parameters:

Returns:

  • (Sass::Script::Value::List) —

    A list of lists of strings representing the result of nesting $selectors. This is in the same format as a selector returned by &.



2368
2369
2370
2371
2372
2373
2374
2375
2376
 
# File 'lib/sass/script/functions.rb', line 2368

def selector_nest(*selectors)
  if selectors.empty?
    raise ArgumentError.new("$selectors: At least one selector must be passed")
  end

  parsed = [parse_selector(selectors.first, :selectors)]
  parsed += selectors[1..-1].map {|sel| parse_selector(sel, :selectors, !!:parse_parent_ref)}
  parsed.inject {|result, child| child.resolve_parent_refs(result)}.to_sass_script
end

#selector_parse($selector) ⇒ Sass::Script::Value::List

Parses a user-provided selector into a list of lists of strings as returned by &.

Examples:

selector-parse(".foo .bar, .baz .bang") => ('.foo' '.bar', '.baz' '.bang')

Returns A list of lists of strings representing $selector. This is in the same format as a selector returned by &.

Parameters:

Returns:

  • (Sass::Script::Value::List) —

    A list of lists of strings representing $selector. This is in the same format as a selector returned by &.



2342
2343
2344
 
# File 'lib/sass/script/functions.rb', line 2342

def selector_parse(selector)
  parse_selector(selector, :selector).to_sass_script
end

#selector_replace($selector, $original, $replacement) ⇒ Sass::Script::Value::List

Replaces all instances of $original with $replacement in $selector

This works by using @extend and throwing away the original selector. This means that it can be used to do very advanced replacements; see the examples below.

Examples:

selector-replace(".foo .bar", ".bar", ".baz") => ".foo .baz"
selector-replace(".foo.bar.baz", ".foo.baz", ".qux") => ".bar.qux"

Returns A list of lists of strings representing the result of the extension. This is in the same format as a selector returned by &.

Parameters:

Returns:

  • (Sass::Script::Value::List) —

    A list of lists of strings representing the result of the extension. This is in the same format as a selector returned by &.

Raises:

  • (ArgumentError) —

    if the replacement fails



2498
2499
2500
2501
2502
2503
2504
2505
2506
2507
2508
2509
2510
 
# File 'lib/sass/script/functions.rb', line 2498

def selector_replace(selector, original, replacement)
  selector = parse_selector(selector, :selector)
  original = parse_selector(original, :original)
  replacement = parse_selector(replacement, :replacement)

  extends = Sass::Util::SubsetMap.new
  begin
    replacement.populate_extends(extends, original)
    selector.do_extend(extends, [], !!:replace).to_sass_script
  rescue Sass::SyntaxError => e
    raise ArgumentError.new(e.to_s)
  end
end

#selector_unify($selector1, $selector2) ⇒ Sass::Script::Value::List, Sass::Script::Value::Null

Unifies two selectors into a single selector that matches only elements matched by both input selectors. Returns null if there is no such selector.

Like the selector unification done for @extend, this doesn't guarantee that the output selector will match all elements matched by both input selectors. For example, if .a .b is unified with .x .y, .a .x .b.y, .x .a .b.y will be returned, but .a.x .b.y will not. This avoids exponential output size while matching all elements that are likely to exist in practice.

Examples:

selector-unify(".a", ".b") => .a.b
selector-unify(".a .b", ".x .y") => .a .x .b.y, .x .a .b.y
selector-unify(".a.b", ".b.c") => .a.b.c
selector-unify("#a", "#b") => null

Returns A list of lists of strings representing the result of the unification, or null if no unification exists. This is in the same format as a selector returned by &.

Parameters:

Returns:



2544
2545
2546
2547
2548
2549
 
# File 'lib/sass/script/functions.rb', line 2544

def selector_unify(selector1, selector2)
  selector1 = parse_selector(selector1, :selector1)
  selector2 = parse_selector(selector2, :selector2)
  return null unless (unified = selector1.unify(selector2))
  unified.to_sass_script
end

#set ⇒ Sass::Script::Value::List

Return a new list, based on the list provided, but with the nth element changed to the value given.

Note that unlike some languages, the first item in a Sass list is number 1, the second number 2, and so forth.

Negative index values address elements in reverse order, starting with the last element in the list.

Examples:

set-nth($list: 10px 20px 30px, $n: 2, $value: -20px) => 10px -20px 30px

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $n isn't an integer between 1 and the length of $list



1816
1817
1818
1819
1820
1821
1822
1823
 
# File 'lib/sass/script/functions.rb', line 1816

def set_nth(list, n, value)
  assert_type n, :Number, :n
  Sass::Script::Value::List.assert_valid_index(list, n)
  index = n.to_i > 0 ? n.to_i - 1 : n.to_i
  new_list = list.to_a.dup
  new_list[index] = value
  Sass::Script::Value::List.new(new_list, list.separator)
end

#simple_selectors($selector) ⇒ Sass::Script::Value::List

Returns the simple selectors that comprise the compound selector $selector.

Note that $selector must be a compound selector. That means it cannot contain commas or spaces. It also means that unlike other selector functions, this takes only strings, not lists.

Examples:

simple-selectors(".foo.bar") => ".foo", ".bar"
simple-selectors(".foo.bar.baz") => ".foo", ".bar", ".baz"

Returns A list of simple selectors in the compound selector.

Parameters:

Returns:



2571
2572
2573
2574
 
# File 'lib/sass/script/functions.rb', line 2571

def simple_selectors(selector)
  selector = parse_compound_selector(selector, :selector)
  list(selector.members.map {|simple| unquoted_string(simple.to_s)}, :comma)
end

#str_index($string, $substring) ⇒ Sass::Script::Value::Number, Sass::Script::Value::Null

Returns the index of the first occurrence of $substring in $string. If there is no such occurrence, returns null.

Note that unlike some languages, the first character in a Sass string is number 1, the second number 2, and so forth.

Examples:

str-index(abcd, a)  => 1
str-index(abcd, ab) => 1
str-index(abcd, X)  => null
str-index(abcd, c)  => 3

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if any parameter is the wrong type



1491
1492
1493
1494
1495
1496
 
# File 'lib/sass/script/functions.rb', line 1491

def str_index(string, substring)
  assert_type string, :String, :string
  assert_type substring, :String, :substring
  index = string.value.index(substring.value)
  index ? number(index + 1) : null
end

#str_insert($string, $insert, $index) ⇒ Sass::Script::Value::String

Inserts $insert into $string at $index.

Note that unlike some languages, the first character in a Sass string is number 1, the second number 2, and so forth.

Examples:

str-insert("abcd", "X", 1) => "Xabcd"
str-insert("abcd", "X", 4) => "abcXd"
str-insert("abcd", "X", 5) => "abcdX"

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if any parameter is the wrong type



1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
 
# File 'lib/sass/script/functions.rb', line 1459

def str_insert(original, insert, index)
  assert_type original, :String, :string
  assert_type insert, :String, :insert
  assert_integer index, :index
  assert_unit index, nil, :index
  insertion_point = if index.value > 0
                      [index.value - 1, original.value.size].min
                    else
                      [index.value, -original.value.size - 1].max
                    end
  result = original.value.dup.insert(insertion_point, insert.value)
  Sass::Script::Value::String.new(result, original.type)
end

#str_length($string) ⇒ Sass::Script::Value::Number

Returns the number of characters in a string.

Examples:

str-length("foo") => 3

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $string isn't a string



1433
1434
1435
1436
 
# File 'lib/sass/script/functions.rb', line 1433

def str_length(string)
  assert_type string, :String, :string
  number(string.value.size)
end

#str_slice($string, $start-at, $end-at: -1) ⇒ Sass::Script::Value::String

Extracts a substring from $string. The substring will begin at index $start-at and ends at index $end-at.

Note that unlike some languages, the first character in a Sass string is number 1, the second number 2, and so forth.

Examples:

str-slice("abcd", 2, 3)   => "bc"
str-slice("abcd", 2)      => "bcd"
str-slice("abcd", -3, -2) => "bc"
str-slice("abcd", 2, -2)  => "bc"

Returns The substring. This will be quoted if and only if $string was quoted.

Parameters:

  • $start-at (Sass::Script::Value::Number) —

    The index of the first character of the substring. If this is negative, it counts from the end of $string

  • $end-before (Sass::Script::Value::Number) —

    The index of the last character of the substring. If this is negative, it counts from the end of $string. Defaults to -1

Returns:

Raises:

  • (ArgumentError) —

    if any parameter is the wrong type



1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
 
# File 'lib/sass/script/functions.rb', line 1521

def str_slice(string, start_at, end_at = nil)
  assert_type string, :String, :string
  assert_unit start_at, nil, "start-at"

  end_at = number(-1) if end_at.nil?
  assert_unit end_at, nil, "end-at"

  return Sass::Script::Value::String.new("", string.type) if end_at.value == 0
  s = start_at.value > 0 ? start_at.value - 1 : start_at.value
  e = end_at.value > 0 ? end_at.value - 1 : end_at.value
  s = string.value.length + s if s < 0
  s = 0 if s < 0
  e = string.value.length + e if e < 0
  e = 0 if s < 0
  extracted = string.value.slice(s..e)
  Sass::Script::Value::String.new(extracted || "", string.type)
end

#to_lower_case($string) ⇒ Sass::Script::Value::String

Convert a string to lower case,

Examples:

to-lower-case(ABCD) => abcd

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $string isn't a string



1565
1566
1567
1568
 
# File 'lib/sass/script/functions.rb', line 1565

def to_lower_case(string)
  assert_type string, :String, :string
  Sass::Script::Value::String.new(string.value.downcase, string.type)
end

#to_upper_case($string) ⇒ Sass::Script::Value::String

Converts a string to upper case.

Examples:

to-upper-case(abcd) => ABCD

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $string isn't a string



1550
1551
1552
1553
 
# File 'lib/sass/script/functions.rb', line 1550

def to_upper_case(string)
  assert_type string, :String, :string
  Sass::Script::Value::String.new(string.value.upcase, string.type)
end

#transparentize($color, $amount) ⇒ Sass::Script::Value::Color Also known as: fade_out

Makes a color more transparent. Takes a color and a number between 0 and 1, and returns a color with the opacity decreased by that amount.

Examples:

transparentize(rgba(0, 0, 0, 0.5), 0.1) => rgba(0, 0, 0, 0.4)
transparentize(rgba(0, 0, 0, 0.8), 0.2) => rgba(0, 0, 0, 0.6)

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $amount is out of bounds, or either parameter is the wrong type

See Also:



934
935
936
 
# File 'lib/sass/script/functions.rb', line 934

def transparentize(color, amount)
  _adjust(color, amount, :alpha, 0..1, :-)
end

#type_of($value) ⇒ Sass::Script::Value::String

Returns the type of a value.

Examples:

type-of(100px)  => number
type-of(asdf)   => string
type-of("asdf") => string
type-of(true)   => bool
type-of(#fff)   => color
type-of(blue)   => color

Parameters:

Returns:



1584
1585
1586
 
# File 'lib/sass/script/functions.rb', line 1584

def type_of(value)
  identifier(value.class.name.gsub(/Sass::Script::Value::/, '').downcase)
end

#unique_id ⇒ Sass::Script::Value::String

Returns a unique CSS identifier. The identifier is returned as an unquoted string. The identifier returned is only guaranteed to be unique within the scope of a single Sass run.

Returns:



2147
2148
2149
2150
2151
2152
2153
2154
 
# File 'lib/sass/script/functions.rb', line 2147

def unique_id
  generator = Sass::Script::Functions.random_number_generator
  Thread.current[:sass_last_unique_id] ||= generator.rand(36**8)
  # avoid the temptation of trying to guess the next unique value.
  value = (Thread.current[:sass_last_unique_id] += (generator.rand(10) + 1))
  # the u makes this a legal identifier if it would otherwise start with a number.
  identifier("u" + value.to_s(36).rjust(8, '0'))
end

#unit($number) ⇒ Sass::Script::Value::String

Returns the unit(s) associated with a number. Complex units are sorted in alphabetical order by numerator and denominator.

Examples:

unit(100) => ""
unit(100px) => "px"
unit(3em) => "em"
unit(10px * 5em) => "em*px"
unit(10px * 5em / 30cm / 1rem) => "em*px/cm*rem"

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $number isn't a number



1634
1635
1636
1637
 
# File 'lib/sass/script/functions.rb', line 1634

def unit(number)
  assert_type number, :Number, :number
  quoted_string(number.unit_str)
end

#unitless($number) ⇒ Sass::Script::Value::Bool

Returns whether a number has units.

Examples:

unitless(100) => true
unitless(100px) => false

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $number isn't a number



1649
1650
1651
1652
 
# File 'lib/sass/script/functions.rb', line 1649

def unitless(number)
  assert_type number, :Number, :number
  bool(number.unitless?)
end

#unquote($string) ⇒ Sass::Script::Value::String

Removes quotes from a string. If the string is already unquoted, this will return it unmodified.

Examples:

unquote("foo") => foo
unquote(foo) => foo

Parameters:

Returns:

Raises:

  • (ArgumentError) —

    if $string isn't a string

See Also:



1395
1396
1397
1398
1399
1400
1401
 
# File 'lib/sass/script/functions.rb', line 1395

def unquote(string)
  if string.is_a?(Sass::Script::Value::String) && string.type != :identifier
    identifier(string.value)
  else
    string
  end
end

#variable_exists($name) ⇒ Sass::Script::Value::Bool

Check whether a variable with the given name exists in the current scope or in the global scope.

Examples:

$a-false-value: false;
variable-exists(a-false-value) => true

variable-exists(nonexistent) => false

Parameters:

Returns:



2227
2228
2229
2230
 
# File 'lib/sass/script/functions.rb', line 2227

def variable_exists(name)
  assert_type name, :String, :name
  bool(environment.caller.var(name.value))
end

#zip($lists...) ⇒ Sass::Script::Value::List

Combines several lists into a single multidimensional list. The nth value of the resulting list is a space separated list of the source lists' nth values.

The length of the resulting list is the length of the shortest list.

Examples:

zip(1px 1px 3px, solid dashed solid, red green blue)
=> 1px solid red, 1px dashed green, 3px solid blue

Parameters:

Returns:



1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
 
# File 'lib/sass/script/functions.rb', line 1937

def zip(*lists)
  length = nil
  values = []
  lists.each do |list|
    array = list.to_a
    values << array.dup
    length = length.nil? ? array.length : [length, array.length].min
  end
  values.each do |value|
    value.slice!(length)
  end
  new_list_value = values.first.zip(*values[1..-1])
  list(new_list_value.map {|list| list(list, :space)}, :comma)
end