The ServiceSkeleton provides the bare bones of a "service" program -- one which is intended to be long-lived, providing some sort of functionality to other parts of a larger system. It provides:

  • A Logger, including dynamic log-level and filtering management;
  • Prometheus-based metrics registry;
  • Signal handling;
  • Configuration extraction from the process environment;
  • Supervision and automated restarting of your service code;
  • and more.

The general philosophy of ServiceSkeleton is to provide features which have been found to be almost universally necessary in modern deployment configurations, to prefer convenience over configuration, and to always be secure by default.

Installation

It's a gem:

gem install service_skeleton

There's also the wonders of the Gemfile:

gem 'service_skeleton'

If you're the sturdy type that likes to run from git:

rake install

Or, if you've eschewed the convenience of Rubygems entirely, then you presumably know what to do already.

Usage

A very minimal implementation of a service using ServiceSkeleton, which simply prints "Hello, Service!" to stdout every second or so, might look like this:

require "service_skeleton"

class HelloService
  include ServiceSkeleton

  def run
    loop do
      puts "Hello, Service!"
      sleep 1
    end
  end
end

ServiceSkeleton::Runner.new(HelloService, ENV).run if __FILE__ == $0

First, we require the "service_skeleton" library, which is a pre-requisite for the ServiceSkeleton module to be available. Your code is placed in its own class in the run method, where you put your service's logic. The ServiceSkeleton module provides helper methods and initializers, which will be introduced as we go along.

The run method is typically an infinite loop, because services are long-running, persistent processes. If you run method exits, or raises an unhandled exception, the supervisor will restart it.

Finally, the last line uses the ServiceSkeleton::Runner class to actually run your service. This ensures that all of the scaffolding services, like the signal handler and metrics server, are up and running alongside your service code.

The #run loop

The core of a service is usually some sort of infinite loop, which waits for a reason to do something, and then does it. A lot of services are network accessible, and so the "reason to do something" is "because someone made a connection to a port on which I'm listening". Other times it could be because of a periodic timer firing, a filesystem event, or anything else that takes your fancy.

Whatever it is, ServiceSkeleton doesn't discriminate. All you have to do is write it in your service class' #run method, and we'll take care of the rest.

STAHP!

When your service needs to be stopped for one reason or another, ServiceSkeleton needs to be able to tell your code to stop. By default, the thread that is running your service will just be killed, which might be fine if your service holds no state or persistent resources, but often that isn't the case.

If your code needs to stop gracefully, you should define a (thread-safe) instance method, #shutdown, which does whatever is required to signal to your service worker code that it is time to return from the #run method. What that does, exactly, is up to you.

class CustomShutdownService
  include ServiceSkeleton

  def run
    until @shutdown do
      puts "Hello, Service!"
      sleep 1
    end

    puts "Shutting down gracefully..."
  end

  def shutdown
    @shutdown = true
  end
end

To avoid the unpleasantness of a hung service, there is a limit on the amount of time that ServiceSkeleton will wait for your service code to terminate. This is, by default, five seconds, but you can modify that by defining a #shutdown_timeout method, which returns a Numeric, to specify the number of seconds that ServiceSkeleton should wait for termination.

class SlowShutdownService
  include ServiceSkeleton

  def run
    until @shutdown do
      puts "Hello, Service!"
      sleep 60
    end
  end

  def shutdown
    @shutdown = true
  end

  def shutdown_timeout
    # We need an unusually long shutdown timeout for this service because
    # the shutdown flag is only checked once a minute, which is much longer
    # than the default shutdown period.
    90
  end
end

If your service code does not terminate before the timeout, the thread will be, once again, unceremoniously killed.

Exceptional Behaviour

If your #run loop happens to raise an unhandled exception, it will be caught, logged, and your service will be restarted. This involves instantiating a new instance of your service class, and calling #run again.

In the event that the problem that caused the exception isn't transient, and your service code keeps exiting (either by raising an exception, or the #run method returning), the supervisor will, after a couple of retries, terminate the whole process.

This allows for a really clean slate restart, by starting a whole new process. Your process manager should handle automatically restarting the process in a sensible manner.

The Service Name

Several aspects of a ServiceSkeleton service, including environment variable and metric names, can incorporate the service's name, usually as a prefix. The service name is derived from the name of the class that you provide to ServiceSkeleton::Runner.new, by converting the CamelCase class name into a snake_case service name. If the class name is in a namespace, that is included also, with the :: turned into _.

Configuration

Almost every service has a need for some amount of configuration. In keeping with the general principles of the 12 factor app, ServiceSkeleton takes configuration from the environment. However, we try to minimise the amount of manual effort you need to expend to make that happen, and provide configuration management as a first-class operation.

Basic Configuration

The ServiceSkeleton module defines an instance method, called #config, which returns an instance of ServiceSkeleton::Config (or some other class you specify; more on that below), which provides access to the environment that was passed into the service object at instantiation time (ie the ENV in ServiceSkeleton.new(MyService, ENV)) via the #[] method. So, in a very simple application where you want to get the name of the thing to say hello to, it might look like this:

class GenericHelloService
  include ServiceSkeleton

  def run
    loop do
      puts "Hello, #{config["RECIPIENT"]}!"
      sleep 1
    end
  end
end

ServiceSkeleton::Runner.new(GenericHelloService, "RECIPIENT" => "Bob").start

This will print "Hello, Bob!" every second.

Declaring Configuration Variables

If your application has very minimal needs, it's possible that directly accessing the environment will be sufficient. However, you can (and usually should) declare your configuration variables in your service class, because that way you can get coerced values (numbers, booleans, lists, etc, rather than just plain strings), range and format checking (say "the number must be an integer between one and ten", or "the string must match this regex"), default values, and error reporting. You also get direct access to the configuration value as a method call on the config object.

To declare configuration variables, simply call one of the "config declaration methods" (as listed in the ServiceSkeleton::ConfigVariables module) in your class definition, and pass it an environment variable name (as a string or symbol) and any relevant configuration parameters (like a default, or a validity range, or whatever).

When you run your service (via ServiceSkeleton::Runner#new), the environment you pass in will be examined and the configuration initialised. If any values are invalid (number out of range, etc) or missing (for any configuration variable that doesn't have a default), then a ServiceSkeleton::InvalidEnvironmentError exception will be raised and the service will not start.

During your service's execution, any time you need to access a configuration value, just call the matching method name (the all-lowercase version of the environment variable name, without the service name prefix) on config, and you'll get the value in your lap.

Here's a version of our generic greeter service, using declared configuration variables:

class GenericHelloService
  include ServiceSkeleton

  string :RECIPIENT, match: /\A\w+\z/

  def run
    loop do
      puts "Hello, #{config.recipient}!"
      sleep 1
    end
  end
end

begin
  ServiceSkeleton::Runner.new(GenericHelloService, ENV).run
rescue ServiceSkeleton::InvalidEnvironmentError => ex
  $stderr.puts "Configuration error found: #{ex.message}"
  exit 1
end

This service, if run without a RECIPIENT environment variable being available, will exit with an error. If that isn't what you want, you can declare a default for a config variable, like so:

class GenericHelloService
  include ServiceSkeleton

  string :RECIPIENT, match: /\A\w+\z/, default: "Anonymous Coward"

  # ...

This version will print "Hello, Anonymous Coward!" if no RECIPIENT environment variable is available.

Environment Variable Prefixes

It's common for all (or almost all) of your environment variables to have a common prefix, usually named for your service, to distinguish your service's configuration from any other environment variables lying around. However, to save on typing, you don't want to have to use that prefix when accessing your config methods.

Enter: the service name prefix. Any of your environment variables whose name starts with your service's name (matched case-insensitively) followed by an underscore will have that part of the environment variable name removed to determine the method name on config. The original environment variable name is still matched to a variable declaration, so, you need to declare the variable with the prefix, it is only the method name on the config object that won't have the prefix.

Using this environment variable prefix support, the GenericHelloService would have a (case-insensitive) prefix of generic_hello_service_. In that case, extending the above example a little more, you could do something like this:

class GenericHelloService
  include ServiceSkeleton

  string :GENERIC_HELLO_SERVICE_RECIPIENT, match: /\A\w+\z/

  def run
    loop do
      puts "Hello, #{config.recipient}!"
      sleep 1
    end
  end
end

Then, if the environment contained GENERIC_HELLO_SERVICE_RECIPIENT, its value would be accessible via config.recipient in the program.

Sensitive environment variables

Sometimes your service will take configuration data that really, really shouldn't be available to subprocesses or anyone who manages to catch a sneak-peek at your service's environment. In that case, you can declare an environment variable as "sensitive", and after the configuration is parsed, that environment variable will be redacted from the environment.

To declare an environment variable as "sensitive", simply pass the sensitive parameter, with a trueish value, to the variable declaration in your class:

class DatabaseManager
  include ServiceSkeleton

  string :DB_PASSWORD, sensitive: true

  ...
end

NOTE: The process environment can only be modified if you pass the real, honest-to-goodness ENV object into MyServiceClass.new(ENV). If you provide a copy of ENV, or some other hash entirely, that'll work if you don't have any sensitive variables declared, but the moment you declare a sensitive variable, passing in any hash other than ENV will cause the service to log an error and refuse to start. This avoids the problems of accidentally modifying global state if that would be potentially bad (we assume you copied ENV for a reason) without leaving a gaping security hole (sensitive data blindly passed into subprocesses that you didn't expect).

Using a Custom Configuration Class

Whilst we hope that ServiceSkeleton::Config will be useful in most situations, there are undoubtedly cases where the config management we provide won't be enough. In that case, you are encouraged to subclass ServiceSkeleton::Config and augment the standard interface with your own implementations (remembering to call super where appropriate), and tell ServiceSkeleton to use your implementation by calling the .config_class class method in your service's class definition, like this:

class MyServiceConfig < ServiceSkeleton::Config
  attr_reader :something_funny

  def initialize(env)
    @something_funny = "flibbety gibbets"
  end
end

class MyService
  include ServiceSkeleton

  config_class MyServiceConfig

  def run
    loop do
      puts config.something_funny
      sleep 1
    end
  end
end

Logging

You can't have a good service without good logging. Therefore, the ServiceSkeleton does its best to provide a sensible logging implementation for you to use.

What You Get

Every instance of your service class has a method named, uncreatively, logger. It is a (more-or-less) straight-up instance of the Ruby stdlib Logger, on which you can call all the usual methods (#debug, #info, #warn, #error, etc). By default, it sends all log messages to standard error.

When calling the logger, you really, really want to use the "progname+message-in-a-block" style of recording log messages, which looks like this:

logger.debug("lolrus") { "Something funny!" }

In addition to the potential performance benefits, the ServiceSkeleton logger provides the ability to filter on the progname passed to each log message call. That means that you can put in lots of debug logging (which is always a good idea), and then turn on debug logging only for the part of the system you wish to actively debug, based on log messages that are tagged with a specified progname. No more grovelling through thousands of lines of debug logging to find the One Useful Message.

You also get, as part of this package, built-in dynamic log level adjustment; using Unix signals or the admin HTTP interface (if enabled), you can tell the logger to increase or decrease logging verbosity without interrupting service. We are truly living in the future.

Finally, if you're a devotee of the ELK stack, the logger can automagically send log entries straight into logstash, rather than you having to do it in some more roundabout fashion.

Logging Configuration

The logger automatically sets its configuration from, you guessed it, the environment. The following environment variables are recognised by the logger. All environment variable names are all-uppercase, and the <SERVICENAME>_ portion is the all-uppercase service name.

  • <SERVICENAME>_LOG_LEVEL (default: "INFO") -- the minimum severity of log messages which will be emitted by the logger.

The simple form of this setting is just a severity name: one of DEBUG, INFO, WARN, ERROR, or FATAL (case-insensitive). This sets the severity threshold for all log messages in the entire service.

If you wish to change the severity level for a single progname, you can override the default log level for messages with a specific progname, by specifying one or more "progname/severity" pairs, separated by commas. A progname/severity pair looks like this:

    <progname>=<severity>

To make things even more fun, if <progname> looks like a regular expression (starts with / or %r{, and ends with / or } plus optional flag characters), then all log messages with prognames matching the specified regex will have that severity applied. First match wins. The default is still specified as a bare severity name, and the default can only be set once.

That's a lot to take in, so here's an example which sets the default to INFO, debugs the buggy progname, and only emits errors for messages with the (case-insensitive) string noisy in their progname:

    INFO,buggy=DEBUG,/noisy/i=ERROR

Logging levels can be changed at runtime via signals.

  • <SERVICENAME>_LOGSTASH_SERVER (string; default "") -- if set to a non-empty string, we will engage the services of the loggerstash gem on your behalf to send all log entries to the logstash server you specify (as an address:port, hostname:port, or SRV record. Just be sure and configure logstash appropriately.

  • <SERVICENAME>_LOG_ENABLE_TIMESTAMPS (boolean; default: "no") -- if set to a true-ish value (yes/y/on/true/1), then the log entries emitted by the logger will have the current time (to the nearest nanosecond) prefixed to them, in RFC3339 format (<YYYY>-<mm>-<dd>T<HH>:<MM>:<SS>.<nnnnnnnnn>Z). By default, it is assumed that services are run through a supervisor system of some sort, which captures log messages and timestamps them, but if you are in a situation where log messages aren't automatically timestamped, then you can use this to get them back.

  • <SERVICENAME>_LOG_FILE (string; default: "/dev/stderr") -- the file to which log messages are written. The default, to send messages to standard error, is a good choice if you are using a supervisor system which captures service output to its own logging system, however if you are stuck without such niceties, you can specify a file on disk to log to instead.

  • <SERVICENAME>_LOG_MAX_FILE_SIZE (integer; range 0..Inf; default: "1048576") -- if you are logging to a file on disk, you should limit the size of each log file written to prevent disk space exhaustion. This configuration variable specifies the maximum size of any one log file, in bytes. Once the log file exceeds the specified size, it is renamed to <filename>.0, and a new log file started.

If, for some wild reason, you don't wish to limit your log file sizes, you can set this environment variable to "0", in which case log files will never be automatically rotated. In that case, you are solely responsible for rotation and log file management, and the SIGHUP signal will likely be of interest to you.

  • <SERVICENAME>_LOG_MAX_FILES (integer; range 1..Inf; default: "3") -- if you are logging to a file on disk, you should limit the number of log files kept to prevent disk space exhaustion. This configuration variable specifies the maximum number of log files to keep (including the log file currently being written to). As log files reach LOG_MAX_FILE_SIZE, they are rotated out, and older files are renamed with successively higher numeric suffixes. Once there are more than LOG_MAX_FILES on disk, the oldest file is deleted to keep disk space under control.

Using this "file size+file count" log file management method, your logs will only ever consume about LOG_MAX_FILES*LOG_MAX_FILE_SIZE bytes of disk space.

Metrics

Running a service without metrics is like trying to fly a fighter jet whilst blindfolded: everything seems to be going OK until you slam into the side of a mountain you never saw coming. For that reason, ServiceSkeleton provides a Prometheus-based metrics registry, a bunch of default process-level metrics, an optional HTTP metrics server, and simple integration with the Prometheus ruby client library and the Frankenstein library to make it as easy as possible to instrument the heck out of your service.

Defining and Using Metrics

All the metrics you want to use within your service need to be registered before use. This is done via class methods, similar to declaring environment variables.

To register a metric, use one of the standard metric registration methods from Prometheus::Client::Registry (counter, gauge, histogram, summary) or metric (equivalent to the register method of `Prometheus::Client::Registry) in your class definition to register the metric for use.

In our generic greeter service we've been using as an example so far, you might like to define a metric to count how many greetings have been sent. You'd define such a metric like this:

class GenericHelloService
  include ServiceSkeleton

  string :GENERIC_HELLO_SERVICE_RECIPIENT, match: /\A\w+\z/

  counter :greetings_total, docstring: "How many greetings we have sent", labels: %i{recipient}

  # ...

When it comes time to actually use the metrics you have created, you access them as methods on the metrics method in your service worker instance. Thus, to increment our greeting counter, you simply do:

class GenericHelloService
  include ServiceSkeleton

  string :GENERIC_HELLO_SERVICE_RECIPIENT, match: /\A\w+\z/

  counter :greetings_total, docstring: "How many greetings we have sent", labels: %i{recipient}

  def run
    loop do
      puts "Hello, #{config.recipient}!"
      metrics.greetings_total.increment(labels: { recipient: config.recipient })
      sleep 1
    end
  end
end

As a bonus, because metric names are typically prefixed with the service name, any metrics you define which have the service name as a prefix will have that prefix (and the immediately-subsequent underscore) removed before defining the metric accessor method, which keeps typing to a minimum:

class GenericHelloService
  include ServiceSkeleton

  string :GENERIC_HELLO_SERVICE_RECIPIENT, match: /\A\w+\z/

  counter :generic_hello_service_greetings_total, docstring: "How many greetings we have sent", labels: %i{recipient}

  def run
    loop do
      puts "Hello, #{config.recipient}!"
      metrics.greetings_total.increment(labels: { recipient: config.recipient })
      sleep 1
    end
  end
end

Default Metrics

Recommended practice is for collectors to provide a bunch of standard metrics, and ServiceSkeleton never met a recommended practice it didn't like. So, we provide process metrics, Ruby GC metrics, and Ruby VM metrics.

Metrics Server Configuration

Whilst metrics are always collected, they're not very useful unless they can be scraped by a server. To enable that, you'll need to look at the following configuration variables. All metrics configuration environment variables are all-uppercase, and the <SERVICENAME>_ portion is the all-uppercase version of the service name.

  • <SERVICENAME>_METRICS_PORT (integer; range 1..65535; default: "") -- if set to an integer which is a valid port number (1 to 65535, inclusive), an HTTP server will be started which will respond to a request to /metrics with a Prometheus-compatible dump of time series data.

Signal Handling

Whilst they're a bit old-fashioned, there's no denying that signals still have a useful place in the arsenal of a modern service. However, there are some caveats that apply to signal handling (like their habit of interrupting at inconvenient moments when you can't use mutexes). For that reason, the ServiceSkeleton comes with a signal watcher, which converts specified incoming signals into invocations of regular blocks of code, and a range of default behaviours for common signals.

Default Signals

When the #run method on a ServiceSkeleton::Runner instance is called, the following signals will be hooked, and will perform the described action when that signal is received:

  • SIGUSR1 -- increase the default minimum severity for messages which will be emitted by the logger (FATAL -> ERROR -> WARN -> INFO -> DEBUG). The default severity only applies to log messages whose progname does not match a "progname/severity" pair (see Logging Configuration).

  • SIGUSR2 -- decrease the default minimum severity for messages which will be emitted by the logger.

  • SIGHUP -- close and reopen the log file, if logging to a file on disk. Because of the ServiceSkeleton's default log rotation policy, this shouldn't ordinarily be required, but if you've turned off the default log rotation, you may need this.

  • SIGQUIT -- dump a whooooooole lot of debugging information to standard error, including memory allocation summaries and stack traces of all running threads. If you've ever sent SIGQUIT a Java program, or SIGABRT to a golang program, you know how handy this can be in certain circumstances.

  • SIGINT / SIGTERM -- ask the service to gracefully stop running. It will call your service's #shutdown method to ask it to stop what it's doing and exit. If the signal is sent a second time, the service will be summarily terminated as soon as practical, without being given the opportunity to gracefully release resources. As usual, if a service process needs to be whacked completely and utterly right now, SIGKILL is what you want to use.

Hooking Signals

In addition to the above default signal dispositions, you can also hook signals yourself for whatever purpose you desire. This is typically done in your #run method, before entering the main service loop.

To hook a signal, just call hook_signal with a signal specification and a block of code to execute when the signal fires in your class definition. You can even hook the same signal more than once, because the signal handlers that ServiceSkeleton uses chain to other signal handlers. As an example, if you want to print "oof!" every time the SIGCONT signal is received, you'd do something like this:

class MyService
  include ServiceSkeleton

  hook_signal("CONT") { puts "oof!" }

  def run
    loop { sleep }
  end
end

The code in the block will be executed in the context of the service worker instance that is running at the time the signal is received. You are responsible for ensuring that whatever your handler does is concurrency-safe.

When the service is shutdown, all signal handlers will be automatically unhooked, which saves you having to do it yourself.

Contributing

Patches can be sent as a Github pull request. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the Contributor Covenant code of conduct.

Licence

Unless otherwise stated, everything in this repo is covered by the following copyright notice:

Copyright (C) 2018, 2019  Civilized Discourse Construction Kit, Inc.
Copyright (C) 2019, 2020  Matt Palmer

This program is free software: you can redistribute it and/or modify it
under the terms of the GNU General Public License version 3, as
published by the Free Software Foundation.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.