RbTunTap-OSX
Ported to OSX. Please install Tunnelblick and
sudo kextload /Applications/Tunnelblick.app/Contents/Resources/tap-signed.kext
sudo kextload /Applications/Tunnelblick.app/Contents/Resources/tun-signed.kext
TO DO: Make this work with native Apple utun.
RbTunTap
This gem provides the ability to manipulate (create, configure, persist, delete) tun and tap interfaces (for Linux). Most of the library is implemented as a C extension since it needs to request the changes (creation, deletion, of interfaces) from the kernel via syscalls. Given the relatively complex structures that are involved, it is easier to do this in C than using ffi. The ruby land wrapper code provides a simpler (more ruby-esque) API for ruby programs to interface with.
What are tun/tap interfaces?
These interfaces provide packet reception and transmission capabilities for userspace programs. They work with IP and Ethernet frames respectively. This is a good primer on what these interfaces are and what they are capable of.
Platforms
Currently this is only developed (and tested) on Linux (Ubuntu 12.04 and 14.04), however it should work on other (modern) Linux kernels/distributions as well (kernels that ship with most popular distributions support this).
Installation
Add this line to your application's Gemfile:
gem 'rb_tuntap'
And then execute:
$ bundle install
Or install it yourself as:
$ gem install rb_tuntap
Usage
Creating interfaces
Creating a tun device is as easy as:
tun = RbTunTap::TunDevice.new(DEV_NAME) # DEV_NAME = 'tun0'
tun.open(false)
Similarly tap devices are created like this:
tap = RbTunTap::TapDevice.new(DEV_NAME) # DEV_NAME = 'tap0'
tap.open(false)
The parameter to the #open(pkt_info) method determines whether the device will return packet info metadata with with each packet (i.e. - sets the IFF_NO_PI flag accordingly).
If pkt_info is requested, then each frame format is:
Flags [2 bytes]
Proto [2 bytes]
Raw protocol(IP, IPv6, etc) frame.
Configuring interfaces
Next, you'll want to configure the device (e.g. tun):
tun.addr = "192.168.168.1"
tun.netmask = "255.255.255.0"
And then bring up the interface:
tun.up
Optionally, persist it:
tun.persist(true) # false to undo persistence
You may want to also set the hardware address:
tap.hwaddr = DEV_HWADDR # e.g. "9a:34:76:31:b5:6a"
Reading from interfaces
Reading from the device(s) can be done via the IO object they return
tio = tun.to_io
Note that you probably want to use IO#readpartial or IO#sysread to read at least mtu bytes from the device thereby ensuring you are reading off entire packets/frames.
raw_ip = tun.to_io.sysread(tun.mtu)
You can get some really convenient (eth) packet parsing using tap interfaces and the PacketFu gem:
irb(main)> require 'packetfu'
=> true
# We're reading an ethernet frame off the tap interface
irb(main)> raw = tap.to_io.sysread(tap.mtu)
# From another terminal, attempt to ping 192.168.168.11
# "raw" holds the packet we just read off the device.
irb(main)> arp = PacketFu::ARPPacket.new.read(raw)
=> --EthHeader---------------------------------------
eth_dst ff:ff:ff:ff:ff:ff PacketFu::EthMac
eth_src 9a:34:76:31:b5:6a PacketFu::EthMac
eth_proto 0x0806 StructFu::Int16
--ARPHeader---------------------------------------
arp_hw 1 StructFu::Int16
arp_proto 0x0800 StructFu::Int16
arp_hw_len 6 StructFu::Int8
arp_proto_len 4 StructFu::Int8
arp_opcode 1 StructFu::Int16
arp_src_mac 9a:34:76:31:b5:6a PacketFu::EthMac
arp_src_ip 192.168.168.168 PacketFu::Octets
arp_dst_mac 00:00:00:00:00:00 PacketFu::EthMac
arp_dst_ip 192.168.168.11 PacketFu::Octets
Similarly, you can use PacketFu to parse packets from the tun interface (ip packets) as well. You have to do a little more work since PacketFu works with full ethernet frames:
irb(main)> require 'packetfu'
=> true
# Assuming the tun interface is up()'ed and assigned valid IP and netmask
# (192.168.168.1/24 in this example).
#
# From another terminal, ensure that the tun interface is serving as the gateway
# via which its network is reachable. For this example, the routing table is:
#
# default via 10.0.2.2 dev eth0
# 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15
# 192.168.168.0/24 via 192.168.168.1 dev tun0
#
# Note that the tun interface is on the 192.168.168.x network and the route indicates
# that the 192.168.168.x network is reachable via the tun interface
#
# Now trying to ping an imaginary machine on the 192 network (e.g. 192.168.168.14)
# Read a packet off the tun interface
irb(main)> ip = tun.to_io.sysread(tun.mtu)
# Create an eth packet (using packetfu)
irb(main)> eth = PacketFu::EthPacket.new
# Set its payload to be the IP packet we just read
irb(main)> eth.payload = ip
# Now create a packetfu ICMPPacket using this eth packet
irb(main)> PacketFu::ICMPPacket.new.read(eth.to_s)
=> --EthHeader-----------------------------------
eth_dst 00:01:ac:00:00:00 PacketFu::EthMac
eth_src 00:01:ac:00:00:00 PacketFu::EthMac
eth_proto 0x0800 StructFu::Int16
--IPHeader------------------------------------
ip_v 4 Fixnum
ip_hl 5 Fixnum
ip_tos 0 StructFu::Int8
ip_len 84 StructFu::Int16
ip_id 0xbfba StructFu::Int16
ip_frag 16384 StructFu::Int16
ip_ttl 64 StructFu::Int8
ip_proto 1 StructFu::Int8
ip_sum 0xa98d StructFu::Int16
ip_src 192.168.168.1 PacketFu::Octets
ip_dst 192.168.168.14 PacketFu::Octets
--ICMPHeader----------------------------------
icmp_type 8 StructFu::Int8
icmp_code 0 StructFu::Int8
icmp_sum 0xde39 StructFu::Int16
----- 8< OUTPUT SNIPPED 8< -----
Finally, don't forget to clean up
tun.down
tun.close
See the examples directory for a script that demonstrates similar usage of this gem.
Contributing
- Create an issue, describe the bugfix/feature you wish to implement
- Fork the repository ( from here )
- Create your feature branch (
git checkout -b my-new-feature) - Commit your changes (
git commit -am 'Add some feature') - Push to the branch (
git push origin my-new-feature) - Create a new Pull Request
TODOs
- Add multiqueue support (i.e.
IFF_MULTI_QUEUE) for parallel access - Add documentation for ruby API
- Add tests