PryRemoteEm enables you to start instances of Pry in a running EventMachine program and connect to those Pry instances over a network or the Internet. Once connected you can interact with the internal state of the program.

It's based off of Mon-Ouie's pry-remote for DRb.

It adds user authentication and SSL support along with tab-completion and paging. It's compatble with MRI 1.9, or any other VM with support for Fibers and EventMachine.

Installation

gem install pry-remote-em

Usage

require 'pry-remote-em/server'

class Foo
  def initialize(x, y)
    binding.remote_pry_em
  end
end

EM.run { Foo.new 10, 20 }

Running it will print out a message telling you Pry is waiting for a program to connect itself to it:

 [pry-remote-em] listening for connections on pryem://127.0.0.1:6462/

You can then connect to the pry session using pry-remote-em:

$ pry-remote-em pryem://127.0.0.1:6462/
[pry-remote-em] client connected to pryem://127.0.0.1:6462/
[pry-remote-em] remote is PryRemoteEm 0.1.0
[1] pry(#<Foo>)> stat
Method Information:
--
Name: initialize
Owner: Foo
Visibility: private
Type: Bound
Arity: 2
Method Signature: initialize(x, y)
Source Location: (irb):2

[2] pry(#<Foo>)> self
=> #<Foo:0x007fe66a426fa0>

[3] pry(#<Foo>)> ls
locals: _  _dir_  _ex_  _file_  _in_  _out_  _pry_  x  y
[4] pry(#<Foo>)> x
=> 10

[5] pry(#<Foo>)> x = 12
=> 12

[6] pry(#<Foo>)> x
=> 12

[7] pry(#<Foo>)> exit
[pry-remote-em] session terminated

$ pry-remote-em pryem://127.0.0.1:6462/
[pry-remote-em] client connected to pryem://127.0.0.1:6462/
[pry-remote-em] remote is PryRemoteEm 0.1.0
[1] pry(#<Foo>)> x
=> 12

[2] pry(#<Foo>)> exit
[pry-remote-em] session terminated

Features

Multiple Servers

It's easy to run more than one PryRemoteEm service on a single machine, or even in the same process. When you start the service via #remote_pry_em, just specify :auto as the port to use. The service will automatically take the next free port from 6462.

require 'pry-remote-em/server'

os     = ObjectSpace.each_object
expose = []
while expose.length < 5
  o = os.next
  expose.push(o) unless o.frozen?
end

EM.run do
  expose.each {|o| o.remote_pry_em('localhost', :auto) }
end
$ ruby test/auto-demo.rb
[pry-remote-em] listening for connections on pryem://localhost:6462/
[pry-remote-em] listening for connections on pryem://localhost:6463/
[pry-remote-em] listening for connections on pryem://localhost:6464/
[pry-remote-em] listening for connections on pryem://localhost:6465/
[pry-remote-em] listening for connections on pryem://localhost:6466/

$ pry-remote-em pryem://127.0.0.1:6462/
[pry-remote-em] client connected to pryem://127.0.0.1:6462/
[pry-remote-em] remote is PryRemoteEm 0.4.0 pryem
[1] pry("pretty_print")>

$ pry-remote-em  pryem://127.0.0.1:6463/
[pry-remote-em] client connected to pryem://127.0.0.1:6463/
[pry-remote-em] remote is PryRemoteEm 0.4.0 pryem
[1] pry("pack")>

$ pry-remote-em  pryem://127.0.0.1:6464/
[pry-remote-em] client connected to pryem://127.0.0.1:6464/
[pry-remote-em] remote is PryRemoteEm 0.4.0 pryem
[1] pry("to_json")>

$ pry-remote-em  pryem://127.0.0.1:6465/
[pry-remote-em] client connected to pryem://127.0.0.1:6465/
[pry-remote-em] remote is PryRemoteEm 0.4.0 pryem
[1] pry("to_json")>

$ pry-remote-em  pryem://127.0.0.1:6466/
[pry-remote-em] client connected to pryem://127.0.0.1:6466/
[pry-remote-em] remote is PryRemoteEm 0.4.0 pryem
[1] pry(#<RubyVM::InstructionSequence>)>

Server Broker

When more than one server is running on a given host and each server is started with :auto it can be time consuming to manually figure out which port each server is running on. The Broker which listens on port 6462 keeps track of which server is running on which port.

By default the pry-remote-em cli utility will connect to the broker and retrieve a list of known servers. You can then select one to connect to by its id, name or url. You can also choose to proxy your connection through the broker to the selected server.


$ bin/pry-remote-em
[pry-remote-em] client connected to pryem://127.0.0.1:6462/
[pry-remote-em] remote is PryRemoteEm 0.7.0 pryem
-----------------------------------------------------------------------------
| id  |  name                              |  url                           |
-----------------------------------------------------------------------------
|  1  |  #<#<Class:0x007f924b9bbee8>>      |  pryem://127.0.0.1:6462/       |
|  2  |  #<Foo>                            |  pryem://127.0.0.1:1337/       |
|  3  |  #<#<Class:0x007f924b9bbee8>>      |  pryems://127.0.0.1:6463/      |
|  4  |  #<#<Class:0x007f924b9bbee8>>      |  pryems://127.0.0.1:6464/      |
|  5  |  #<#<Class:0x007f924b9bbee8>>      |  pryems://127.0.0.1:6465/      |
|  6  |  #<#<Class:0x007f924b9bbee8>>      |  pryems://127.0.0.1:6466/      |
|  7  |  #<#<Class:0x007f924b9bbee8>>      |  pryems://127.0.0.1:6467/      |
|  8  |  #<#<Class:0x007f924b9bbee8>>      |  pryem://127.0.0.1:6468/       |
|  9  |  #<#<Class:0x007f924b9bbee8>>      |  pryem://127.0.0.1:6469/       |
-----------------------------------------------------------------------------
(q) to quit; (r) to refresh (p) to proxy
connect to: 3
[pry-remote-em] client connected to pryem://127.0.0.1:6463/
[pry-remote-em] remote is PryRemoteEm 0.7.0 pryems
[pry-remote-em] negotiating TLS
[pry-remote-em] TLS connection established
[1] pry(#<#<Class:0x007f924b9bbee8>>)>

By default the Broker will listen on 127.0.0.1:6462. To change the ip address that the Broker binds to specify it in a PRYEMBROKER environment variable, or in :broker_host option passed to #remote_pry_em.


$ PRYEMBROKER=0.0.0.0 be ./test/service.rb
I, [2012-07-13T21:10:00.936993 #88528]  INFO -- : [pry-remote-em] listening for connections on pryem://0.0.0.0:6462/
I, [2012-07-13T21:10:00.937132 #88528]  INFO -- : [pry-remote-em broker] listening on pryem://0.0.0.0:6462
I, [2012-07-13T21:10:00.937264 #88528]  INFO -- : [pry-remote-em] listening for connections on pryem://0.0.0.0:1337/
I, [2012-07-13T21:10:00.937533 #88528]  INFO -- : [pry-remote-em] listening for connections on pryems://0.0.0.0:6463/
I, [2012-07-13T21:10:00.937804 #88528]  INFO -- : [pry-remote-em] listening for connections on pryems://0.0.0.0:6464/
I, [2012-07-13T21:10:00.938126 #88528]  INFO -- : [pry-remote-em] listening for connections on pryems://0.0.0.0:6465/
I, [2012-07-13T21:10:00.938471 #88528]  INFO -- : [pry-remote-em] listening for connections on pryems://0.0.0.0:6466/
I, [2012-07-13T21:10:00.938835 #88528]  INFO -- : [pry-remote-em] listening for connections on pryems://0.0.0.0:6467/
I, [2012-07-13T21:10:00.939230 #88528]  INFO -- : [pry-remote-em] listening for connections on pryem://0.0.0.0:6468/
I, [2012-07-13T21:10:00.939640 #88528]  INFO -- : [pry-remote-em] listening for connections on pryem://0.0.0.0:6469/
I, [2012-07-13T21:10:01.031576 #88528]  INFO -- : [pry-remote-em broker] received client connection from 127.0.0.1:62288
I, [2012-07-13T21:10:01.031931 #88528]  INFO -- : [pry-remote-em] client connected to pryem://127.0.0.1:6462/
I, [2012-07-13T21:10:01.032120 #88528]  INFO -- : [pry-remote-em] remote is PryRemoteEm 0.7.0 pryem
I, [2012-07-13T21:10:01.032890 #88528]  INFO -- : [pry-remote-em broker] registered pryem://127.0.0.1:6462/ - "#<#<Class:0x007f924b9bbee8>>"
I, [2012-07-13T21:10:01.125123 #88528]  INFO -- : [pry-remote-em broker] registered pryem://127.0.0.1:6469/ - "#<#<Class:0x007f924b9bbee8>>"
I, [2012-07-13T21:10:01.125487 #88528]  INFO -- : [pry-remote-em broker] registered pryems://127.0.0.1:6467/ - "#<#<Class:0x007f924b9bbee8>>"
I, [2012-07-13T21:10:01.490729 #88528]  INFO -- : [pry-remote-em broker] registered pryems://127.0.0.1:6464/ - "#<#<Class:0x007f924b9bbee8>>"
I, [2012-07-13T21:10:01.583015 #88528]  INFO -- : [pry-remote-em broker] registered pryem://127.0.0.1:1337/ - "#<Foo>"
I, [2012-07-13T21:10:01.674842 #88528]  INFO -- : [pry-remote-em broker] registered pryems://127.0.0.1:6466/ - "#<#<Class:0x007f924b9bbee8>>"
I, [2012-07-13T21:10:01.766813 #88528]  INFO -- : [pry-remote-em broker] registered pryem://127.0.0.1:6468/ - "#<#<Class:0x007f924b9bbee8>>"
I, [2012-07-13T21:10:01.858423 #88528]  INFO -- : [pry-remote-em broker] registered pryems://127.0.0.1:6465/ - "#<#<Class:0x007f924b9bbee8>>"

It is possible to have a pry-remote-em server register with a Broker running on a different host. Just specify the Brokers address in the PRYEMBROKER environment variable or the :broker_host option passed to #remote_pry_em.

To connect to a broker running on a seperate host with the cli client just specify it on the command line bin/pry-remote-em preym://10.0.0.2:6462/. You can then proxy your client connections to remote servers through that Broker.

The Broker will not run in TLS mode, but it can proxy connections to a TLS enabled server.

TLS Encryption

When creating a server pass the tls: true option to enable TLS.

obj.remote_pry_em('localhost', :auto, tls: true)

If you pass a Hash it will be used to configure the internal TLS handler.

obj.remote_pry_em('localhost', :auto, tls: { private_key_file: '/tmp/server.key' })

See EventMachine::Connection#start_tls for the available options.

When the command line client connects to a TLS enabled server it will automatically use TLS mode even if the user didn't request it.

$ pry-remote-em pryem://localhost:6462/
[pry-remote-em] client connected to pryem://127.0.0.1:6462/
[pry-remote-em] remote is PryRemoteEm 0.4.0 pryems
[pry-remote-em] negotiating TLS
[pry-remote-em] TLS connection established
[1] pry(#<Hash>)>

To always require a TLS connection give pry-remote-em a pryem*s* URL. If the server doesn't support TLS the connection will be terminated.

$ pry-remote-em pryems://localhost:6468/
[pry-remote-em] client connected to pryem://127.0.0.1:6468/
[pry-remote-em] remote is PryRemoteEm 0.4.0 pryem
[pry-remote-em] connection failed
[pry-remote-em] server doesn't support required scheme "pryems"
[pry-remote-em] session terminated

User Authentication

Server

If the service is started with the :auth option it will require all clients to authenticate on connect. The :auth option can be a Hash, proc or any object that responds to #call.

Auth with a Hash

auth_hash = { 'caleb' => 'crane', 'john' => 'lowski' }
obj       = { encoding: __ENCODING__, weather: :cloudy }
EM.run do
  obj.remote_pry_em('localhost', :auto, tls: true, auth: auth_hash)
end

Auth with a lambda

require 'net/ldap'
ldap_anon = lambda do |user, pass|
  ldap = Net::LDAP.new host: '10.0.0.1', port: 389, auth: { method: :simple, username: user, password: pass }
  ldap.bind
end
obj       = { encoding: __ENCODING__, weather: :cloudy }
EM.run do
  obj.remote_pry_em('localhost', :auto, tls: true, auth: ldap_anon)
end

Auth with an object

class Authenticator
  def initialize(db)
    @db = db
  end
  def call(user, pass)
    @db[user] && @db[user] == pass
  end
end

obj       = { encoding: __ENCODING__, weather: :cloudy }
EM.run do
  obj.remote_pry_em('localhost', :auto, tls: true, auth: Authenticator.new(auth_hash))
end

Client

The included command line client pry-remote-em can take a username and/or password as part of the url argument. If either a username or password is not supplied, but required by the server it will prompt for them.

$ pry-remote-em pryems://localhost:6464/
[pry-remote-em] client connected to pryem://127.0.0.1:6464/
[pry-remote-em] remote is PryRemoteEm 0.4.0 pryems
[pry-remote-em] negotiating TLS
[pry-remote-em] TLS connection established
user: caleb
caleb's password: *****
[1] pry(#<Hash>)>
$ pry-remote-em pryems://caleb@localhost:6464
[pry-remote-em] client connected to pryem://127.0.0.1:6464/
[pry-remote-em] remote is PryRemoteEm 0.4.0 pryems
[pry-remote-em] negotiating TLS
[pry-remote-em] TLS connection established
caleb's password: *****
[1] pry(#<Hash>)> exit
$ pry-remote-em pryems://caleb:crane@localhost:6464
[pry-remote-em] client connected to pryem://127.0.0.1:6464/
[pry-remote-em] remote is PryRemoteEm 0.4.0 pryems
[pry-remote-em] negotiating TLS
[pry-remote-em] TLS connection established
[1] pry(#<Hash>)> exit

Tab Completion

Tab completion candidates will be retrieved from the server and presented on the client side.

$ bin/pry-remote-em pryems:///
[pry-remote-em] client connected to pryem://127.0.0.1:6462/
[pry-remote-em] remote is PryRemoteEm 0.2.0 pryems
[1] pry(#<Hash>)> key (^TAB ^TAB)
key   key?  keys
[1] pry(#<Hash>)> keys
=> [:encoding]

Paging

The standard Pry pager is supported through the included client.

[1] pry(#<Hash>)> ENV
=> {"COMMAND_MODE"=>"unix2003",
 "DISPLAY"=>"/tmp/launch-0EGhJW/org.x:0",
 "EDITOR"=>"mvim -f --nomru -c \"au VimLeave * !open -a Terminal\"",
 "GEM_HOME"=>"/Users/caleb/.rvm/gems/ruby-1.9.2-p290",
 "GEM_PATH"=>
  "/Users/caleb/.rvm/gems/ruby-1.9.2-p290:/Users/caleb/.rvm/gems/ruby-1.9.2-p290@global",
 "GREP_COLOR"=>"1;32",
 "GREP_OPTIONS"=>"--color=auto",
 "HOME"=>"/Users/caleb",
 "IRBRC"=>"/Users/caleb/.rvm/rubies/ruby-1.9.2-p290/.irbrc",
 "LC_CTYPE"=>"",
 "LOGNAME"=>"caleb",
 "LSCOLORS"=>"Gxfxcxdxbxegedabagacad",
:

Sandbox

The PryRemoteEm::Sandbox class introduced to help in case when you do not mush interested in console's executing context but just want to access a remote server's "control panel" with usefull methods and without worrying about breaking some object's internal state.

To use sandbox just run PryRemoteEm::Server.run instead of binding.remote_pry_em. You can include any modules with your application's business logic in this class to get real "control panel" for your program.

The simple example:

# Microservice A, a.rb

require 'bundler'
Bundler.require

DB = Sequel.sqlite

module ControlPanel
  def u(id)
    DB[:users].find(id)
  end

  def ban(id)
    DB[:users].where(id: id).update u(id).merge('status' => 'banned')
  end
end

PryRemoteEm::Sandbox.include ControlPanel

EventMachine.run do
  trap(:INT) { EventMachine.stop }

  PryRemoteEm::Server.run name: 'Microservice A', port: :auto, remote_broker: true, details: { environment: 'staging' }
end
# Microservice B, b.rb

require 'bundler'
Bundler.require

module Transport
  # ...
end

module ControlPanel
  def ping(microservice)
    Transport.send_ping(microservice)
  end
end

PryRemoteEm::Sandbox.include ControlPanel

EventMachine.run do
  trap(:INT) { EventMachine.stop }

  PryRemoteEm::Server.run name: 'Microservice B', port: :auto, remote_broker: true, details: { environment: 'staging' }
end

Then, in shell:

$ pry-remote-em-broker > /dev/null &
$ ruby a.rb > /dev/null &
$ ruby b.rb > /dev/null &
$
$ pry-remote-em -P --sn -d environment
[pry-remote-em] client connected to pryem://127.0.0.1:6462/
[pry-remote-em] remote is PryRemoteEm 1.0.0 pryem
------------------------------------------
|     |  name            |  environment  |
------------------------------------------
|  1  |  Microservice A  |  staging      |
|  2  |  Microservice B  |  staging      |
------------------------------------------
(q) to quit; (r) to refresh; (c) to connect without proxy
proxy to: 1
[pry-remote-em] remote is PryRemoteEm 1.0.0 pryem

Server details:
  environment: staging

[1] Microservice A (sandbox)> u 13
=> {"id"=>13, "violations"=>4, "status"=>"active"}
[2] Microservice A (sandbox)> @my_bad_user = _
=> {"id"=>13, "violations"=>4, "status"=>"active"}
[3] Microservice A (sandbox)> ban 13 # You can use control panel to work with some business cases
=> 1
[4] Microservice A (sandbox)> exit
[pry-remote-em] session terminated
$
$ pry-remote-em pryem://127.0.0.1:6463
[pry-remote-em] remote is PryRemoteEm 1.0.0 pryem

Server details:
  environment: staging

[1] Microservice A (sandbox)> @my_bad_user
=> {"id"=>13, "violations"=>4, "status"=>"banned"}
[2] Microservice A (sandbox)> exit
[pry-remote-em] session terminated
$
$ pry-remote-em pryem://127.0.0.1:6464
[pry-remote-em] remote is PryRemoteEm 1.0.0 pryem

Server details:
  environment: staging

[1] Microservice A (sandbox)> ping :A # Or you can use it to check infrastructure and perform custom communications between servers
=> "pong"
[2] Microservice A (sandbox)> exit
[pry-remote-em] session terminated

In sandbox you have those possibilities "out of the box":

  • puts, putc, print, p and pp methods works almost as you expected. In other contexts they will use server's STDOUT, but in sandbox they will send all the data to client. Remember, you'll lost those methods out of the sandbox context:
$ pry-remote-em pryem://127.0.0.1:6463
[pry-remote-em] remote is PryRemoteEm 1.0.0 pryem
[1] Demo Server (sandbox)> puts 'Hello World' # It works!
Hello World
=> nil
[2] Demo Server (sandbox)> Object.new.instance_eval { puts "Hello World" } # Do not work
=> nil
[3] Demo Server (sandbox)> cd Object.new
[4] Demo Server (#<Object>):1> puts "Hello World" # Do not work
=> nil
  • any_errors?, last_error and last_errors methods in sandbox context with PryRemoteEm::Sandbox.add_error method from your code to help you store all the bugs and debug it in the bug's execution context. It also integrated with wtf? command. For example:
require 'bundler'
Bundler.require

def safe_handler(source_binding)
  yield
rescue => exception
  PryRemoteEm::Sandbox.add_error(exception, source_binding)
  raise
end

def danger_mathod(a, b)
  safe_handler(binding) do
    a / b
  end
end

EventMachine.run do
  trap(:INT) { EventMachine.stop }

  EventMachine.error_handler do |exception|
    PryRemoteEm::Sandbox.add_error(exception)
  end

  EventMachine.add_timer(5) { danger_mathod 1, 0 }

  PryRemoteEm::Server.run name: 'Demo Server', details: { hostname: 'local' }
end

Then, in shell:

$ pry-remote-em -P --sn -d hostname
[pry-remote-em] client connected to pryem://127.0.0.1:6462/
[pry-remote-em] remote is PryRemoteEm 1.0.0 pryem
---------------------------------------------
|     |  name         |  hostname  | errors |
---------------------------------------------
|  1  |  Demo Server  |  local     | 1      |
---------------------------------------------
(q) to quit; (r) to refresh; (c) to connect without proxy
proxy to: 1
[pry-remote-em] remote is PryRemoteEm 1.0.0 pryem

Server details:
  hostname: local

Server metrics:
  errors: 1

[1] Demo Server (sandbox)> any_errors?
=> true
[2] Demo Server (sandbox)> last_error
=> #<ZeroDivisionError: divided by 0>
[3] Demo Server (sandbox)> last_error.source_timestamp
=> 2018-08-09 14:53:19 UTC
[4] Demo Server (sandbox)> wtf?
Exception: ZeroDivisionError: divided by 0
--
0: demo_server.rb:13:in `/'
1: demo_server.rb:13:in `block in danger_mathod'
2: demo_server.rb:5:in `safe_handler'
3: demo_server.rb:12:in `danger_mathod'
4: demo_server.rb:24:in `block (2 levels) in <main>'
5: /usr/local/lib/ruby/gems/2.4.0/gems/eventmachine-1.2.7/lib/eventmachine.rb:195:in `run_machine'
6: /usr/local/lib/ruby/gems/2.4.0/gems/eventmachine-1.2.7/lib/eventmachine.rb:195:in `run'
7: demo_server.rb:17:in `<main>'
[5] Demo Server (sandbox)> cd last_error.source_binding
[6] Demo Server (main):1> whereami

From: /Users/user/Projects/demo/demo_server.rb @ line 12 Object#danger_mathod:

    11: def danger_mathod(a, b)
 => 12:   safe_handler(binding) do
    13:     a / b
    14:   end
    15: end

[7] Demo Server (main):1> ls
self.methods: inspect  to_s
locals: _  __  _dir_  _ex_  _file_  _in_  _out_  _pry_  a  b
[8] Demo Server (main):1> a
=> 1
[9] Demo Server (main):1> b
=> 0

There is maximum number of errors to store in sandbox to avoid memory leaks. It is 100 by default, but you can tune it with PRYEMSANDBOXERRORS environment variable. You can see simple log about errors in memory (not from server start) and also statistics about errors class from server start (not in memory):

[1] Demo Server (sandbox)> error_history
No errors, yay!
[2] Demo Server (sandbox)> 3.times { 1/0 rescue PryRemoteEm::Sandbox.add_error($!) }
=> nil
[3] Demo Server (sandbox)> undefined_method rescue PryRemoteEm::Sandbox.add_error($!)
=> nil
[4] Demo Server (sandbox)> error_history
2018-08-10 10:25:21 +0300 ZeroDivisionError: divided by 0
2018-08-10 10:25:21 +0300 ZeroDivisionError: divided by 0
2018-08-10 10:25:21 +0300 ZeroDivisionError: divided by 0
2018-08-10 10:25:32 +0300 NameError: undefined local variable or method `unde...
=> nil
[5] Demo Server (sandbox)> error_classes
ZeroDivisionError: 3
NameError: 1
=> nil
[6] Demo Server (sandbox)> 100.times { undefined_method rescue PryRemoteEm::Sandbox.add_error($!) }
=> 100
[7] Demo Server (sandbox)> last_errors.size
=> 100
[8] Demo Server (sandbox)> error_classes
ZeroDivisionError: 3
NameError: 101
[9] Demo Server (sandbox)> error_history
2018-08-10 10:35:17 +0300 NameError: undefined local variable or method `unde...
2018-08-10 10:35:17 +0300 NameError: undefined local variable or method `unde...
... 100 entries total

You can also ignore some error classes. For example, you already monitor database disconnections with another tool and don't interested in user's NotFound excaptions:

PryRemoteEm::Sandbox.ignore_errors.push ActiveRecord::ConnectionTimeoutError, ActiveRecord::RecordNotFound
User.find(-1) rescue PryRemoteEm::Sandbox.add_error($!)
PryRemoteEm::Sandbox.last_errors # => []
  • Simple metrics collector. It can store some instance-specific integers like requests or errors counts, number of connected users, latencies, reconnections, cache size etc. It is not full-featured monitoring solution, but much better than nothing, and also it is super-simple to use. Just call following methods from anywhere in your code:
Metrics = PryRemoteEm::Metrics # Just simplify naming, not necessarily
Metrics.add :requests # Add 1 to `requests` metric, starting from 0
Metrics.add :profit, 42 # Add custom value
Metrics.reduce :waiting_jobs # Using custom value is possible too (pass positive numbers)
Metrics.maximum :daily_online, current_online # Set new value only if it is bigger than current
EM.add_periodic_timer(1.day) { Metrics.set :daily_online, 0 } # Set some value explicitly
Metrics.minimum :best_latency, last_latency # Set new value only if it is smaller than current
Metrics.any? # => true
Metrics.get :requests # => 100500
Metrics.list # Hash with current values

You can see all the metrics when connecting to a server and also in the sandbox console with show_metrics method:

$ pry-remote-em pryem://127.0.0.1:6463
[pry-remote-em] remote is PryRemoteEm 1.0.0 pryem

Server details:
  hostname: local

Server metrics:
  requests: 100500
  profit: 300000000
  waiting_jobs: 0
  daily_online: 70000
  best_latency: 0.003

[1] Demo Server (sandbox)> show_metrics
requests: 100500
profit: 300000000
waiting_jobs: 0
daily_online: 70000
best_latency: 0.003

You also can see the metrics in the broker's table with a new option:

$ pry-remote-em -P --sn -d hostname -m requests
[pry-remote-em] client connected to pryem://127.0.0.1:6462/
[pry-remote-em] remote is PryRemoteEm 1.0.0 pryem
-----------------------------------------------
|     |  name         |  hostname  | requests |
-----------------------------------------------
|  1  |  Demo Server  |  local     | 100500   |
-----------------------------------------------
(q) to quit; (r) to refresh; (c) to connect without proxy
proxy to: q
$
$ pry-remote-em -P --sn -d hostname -m @
[pry-remote-em] client connected to pryem://127.0.0.1:6462/
[pry-remote-em] remote is PryRemoteEm 1.0.0 pryem
----------------------------------------------------------
|     |  name         |  hostname  | metrics             |
----------------------------------------------------------
|  1  |  Demo Server  |  local     | requests: 100500    |
|     |               |            | profit: 300000000   |
|     |               |            | waiting_jobs: 0     |
|     |               |            | daily_online: 70000 |
|     |               |            | best_latency: 0.003 |
----------------------------------------------------------
(q) to quit; (r) to refresh; (c) to connect without proxy
proxy to:

One metric, errors, is enabled by default and will be shown in the broker's table if it was incremented at least once. It will be incremented on PryRemoteEm::Sandbox.add_error call.

  • server method to access PryRemoteEm::Server description object. For example, it can be useful for changing details:
require 'bundler'
Bundler.require

module HealthChecker
  # ...
end

EventMachine.run do
  trap(:INT) { EventMachine.stop }

  PryRemoteEm::Server.run name: 'Demo Server', heartbeat_interval: 1, details: { hand_check: false }
end

Then, in shell:

$ pry-remote-em -P --sn -d hand_check
[pry-remote-em] client connected to pryem://127.0.0.1:6462/
[pry-remote-em] remote is PryRemoteEm 1.0.0 pryem
--------------------------------------
|     |  name         |  hand_check  |
--------------------------------------
|  1  |  Demo Server  |  true        |
|  2  |  Demo Server  |  true        |
|  3  |  Demo Server  |  false       |
|  4  |  Demo Server  |  false       |
|  5  |  Demo Server  |  false       |
--------------------------------------
(q) to quit; (r) to refresh; (c) to connect without proxy
proxy to: 3

Server details:
  hand_check: false

[1] Demo Server (sandbox)> HealthChecker.all_ok?
=> true
[2] Demo Server (sandbox)> server[:details][:hand_check] = true
=> true
[3] Demo Server (sandbox)> exit
[pry-remote-em] session terminated
$
$ sleep 1
$ pry-remote-em -P --sn -d hand_check
[pry-remote-em] client connected to pryem://127.0.0.1:6462/
[pry-remote-em] remote is PryRemoteEm 1.0.0 pryem
--------------------------------------
|     |  name         |  hand_check  |
--------------------------------------
|  1  |  Demo Server  |  true        |
|  2  |  Demo Server  |  true        |
|  3  |  Demo Server  |  true        |
|  4  |  Demo Server  |  false       |
|  5  |  Demo Server  |  false       |
--------------------------------------
(q) to quit; (r) to refresh; (c) to connect without proxy
proxy to:

Messaging

It is possible for each pry-remote-em service to host multiple simultaneous connections. You can send messages to other connections with the '^' and '^^' prefix.

The '^' prefix will send the message to connections on the same object. the '^^' prefix will send the message to all connections in the current process.

Message will not be displayed by the clients until the presses enter.

Authentication Event Callbacks

Available events are:

  • auth_attempt - called each time authentication is attempted
  • auth_fail - called each time authentication fails
  • auth_ok - called each time authentication succeeds
log = ::Logger.new('/var/log/auth.pry.log')
obj.new.remote_pry_em('0.0.0.0', :auto, tls: true, auth: auth_hash) do |pry|
  pry.auth_attempt do |user, ip|
    log.info("got an authentication attempt for #{user} from #{ip}")
  end
  pry.auth_fail do |user, ip|
    log.fatal("failed authentication attempt for #{user} from #{ip}")
  end
  pry.auth_ok do |user, ip|
    log.info("successful authentication for #{user} from #{ip}")
  end
end

Shell Commands

Unless the pry-remote-em service is started with the allow_shell_cmds: false option set it will spawn sub processes for any command prefixed with a '.'.

[1] pry(#<#<Class:0x007fe0be072618>>)> .uname -a
Darwin kiff.local 11.3.0 Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64 x86_64

Interactive commands like vim will probably not behave appropriately.

If the server was started with the allow_shell_cmds: false option then all shell commands will be met with a rejection notice.

[1] pry(#<#<Class:0x007fe0be072618>>)> .ls
shell commands are not allowed by this server

The server will also log whenever a user attempts to execute a shell command.

W, [2012-02-11T19:21:27.663941 #36471]  WARN -- : executing shell command 'ls -al' for  (127.0.0.1:63878)
E, [2012-02-11T19:23:40.770380 #36471] ERROR -- : refused to execute shell command 'ls' for caleb (127.0.0.1:63891)

Environment variables

  • PRYEMNAME - pry server name to show in broker's list, default - target object's inspect
  • PRYEMURL - pry server URL to show in broker's list, default - pryem://#server_host:#server_port/
  • PRYEMHOST - host to bind pry server, default - 127.0.0.1
  • PRYEMPORT - port to bind pry server, default - 6463
  • PRYEMBROKER - host to bind pry broker, default - 127.0.0.1
  • PRYEMBROKERPORT - port to bind pry broker, default - 6462
  • PRYEMREMOTEBROKER - start server without starting broker, default - broker starting with server
  • PRYEMNOPAGER - disable paging on long output, default - pager enabled
  • PRYEMNEGOTIMEOUT - connection negotiation timeout in seconds, default - 15
  • PRYEMHBSEND - server to broker heartbeat interval in seconds, default - 15
  • PRYEMHBCHECK - heartbeat check on broker interval in seconds, default - 20
  • PRYEMBROKERTIMEOUT - reconnect to broker timeout in seconds, default - 3
  • PRYEMSANDBOXERRORS - number of errors to store in sandbox, default - 100

Missing Features

  • HTTP Transport (ticket)
  • SSH key based authentication
  • Looking for connected users and their history

Issues

Please post any bug reports or feature requests on Github

Copyright

Copyright (c) 2012 Caleb Crane

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.