Macros4Cuke is a Cucumber extension that adds a macro facility for your Cucumber scenarios.
With it, you can create any new step that replaces a sequence of sub-steps. All this can be done directly in your feature files without programming step definitions.
- Works with out-of-the-box Cucumber
- Simple installation and setup (no programming required),
- Familiar syntax for macro-step definitions,
- Sub-step sequence can be of arbitrary length,
- Macro-steps may have data arguments,
- Data values can be passed to the sub-steps,
- Domain neutral: applicable to any kind of application that can be driven with Cucumber,
- A group of sub-steps can be made conditional.
Since version 0.4.00, it is also possible to list all the encountered macro definitions.
A quick example
Here is a macro-step example taken from our demo files:
Given I define the step "When I [enter my userid <userid> and password <password>]" to mean: """ Given I landed in the homepage When I click "Sign in" And I fill in "Username" with "<userid>" And I fill in "Password" with "<password>" And I click "Submit" """
The first line above specifies the syntax of the macro-step (it is the text between the square brackets).
Notice also how the macro-step arguments userid and password are enclosed between chevrons (angle brackets) <...>. Finally, the text lines between by the triple quotes """ represent the Cucumber steps to execute when the macro-step is invoked(used) elsewhere in a feature file.
That macro-step can then be used/invoked in a scenario like this:
When I [enter my userid "jdoe" and password "hello-world"]
Once it is executing, the invoked macro-step should be equivalent to:
Given I landed in the homepage When I click "Sign in" And I fill in "Username" with "jdoe" And I fill in "Password" with "hello-world" And I click "Submit"
In other words, this sequence of 5 steps can be replaced by just one. Macros4Cuke not only helps in getting rid of the repeated step sequences, it allows the feature writers to create themselves higher-level steps that are closer to the business logic.
See also the working examples in the
Nicely formatted documentation extracted from these feature files is also available on the Relish website
Macros4Cuke works with:
- MRI Ruby 1.9.x, 2.0.x and 2.1.x.
- JRuby (was tested with version 1.7.3 and above),
- Rubinius 2.x
Macros4Cuke requires Cucumber.
The macros4cuke gem installation is fairly standard.
If you have a
macros4cuke to it. Otherwise, install the gem like this:
$[sudo] gem install macros4cuke
Configuring your Cucumber projects
The procedure to add support for macros in an existing Cucumber project was simplified since version 0.5.00.
There are two possible ways to do it:
- By editing manually a support file; or,
- Let Macros4cuke configure your project.
Alternative 1: manually add one line in a support file
Require the library in one of your ruby files under
# /features/support/env.rb # Add the next single line require 'macros4cuke/cucumber'
That's it! Now you can start writing macros in your Cucumber project.
Alternative 2: let macros4cuke configure your project
Use the following command-line:
$[sudo] macros4cuke --setup project_path
Where project_path is the location of your Cucumber project.
In case the working directory of the shell/command prompt is already the directory containing the Cucumber project, then the command-line is simply:
$[sudo] macros4cuke --setup .
Notice that ending dot above means "the current directory".
Working with a macro-step is a two-stages process:
- Defining a new macro-step; and,
- Using that macro-step in a scenario.
Let's begin by taking a closer look at the definition part.
Defining a macro-step
To create a macro-step, you'll need to use a defining step bundled with Macros4Cuke.
It is a rather unusual Cucumber step in the sense that its sole purpose is to build another step!
The defining step follows the general pattern:
Given I define the step "When I [some phrase]" to mean: """ # A sequence of sub-steps comes here """
The defining step has two key components:
- The quoted sentence
"When I [some phrase]". That part specifies the syntax of your future macro-step.
- The multiline text enclosed between the triple quotes (""") that immediately follows the
the defining step. It is the place where the sub-steps are listed.
These two components are detailed now.
Specifying the syntax of a macro-step
As just mentioned earlier, the quoted sentence determines the syntax of the new macro-step. Its syntax is defined like this:
- The text outside the square brackets follows a fixed pattern. In other words,
the quoted sentence MUST always start as follows:
"When I [.... Notice however, that the Given, Then and '*' keywords are also allowed.
- The text delimited by the square brackets [...], is called the phrase.
A few remarks about the phrase part:
- It must be unique. In other words, it is not possible to create another
macro-step with the same phrase. In fact, Macros4Cuke uses the phrase internally as a mean to identify/name
- It may have one or more arguments. Besides that, the text inside the phrase can be arbitrary (well, almost).
A phrase can be without argument as in:
# A phrase without argument [enter my credentials]
Alternatively, a phrase can have one or more arguments enclosed between chevrons <...>. For instance, the next first phrase has two arguments, the second has three arguments:
[enter my <userid> and <password>] [travel from <origin> to <destination> via <waypoint>]
Each argument (variable) is enclosed between <...> chevrons. In our last example, the argument names are: origin and destination. Notice that origin and destination are variable names that will take a value (if any) when the step is invoked (more on this later).
Specifying the sub-steps of a macro-step
The sub-steps are placed in a Gherkin multiline text, that is, a text that is enclosed between triple quotes ("""). In the next example,
Given I define the step "When I [enter my credentials]" to mean: """ Given I landed in the homepage And I fill in "Username" with "tweedledum" And I fill in "Password" with "tweedledee" And I click "Sign in" """
the text between triple quotes enumerates the sub-steps associated with the macro-step.
A pleasing aspect is the familiar syntax the sub-steps have: they closely look to genuine steps of a scenario.
Sub-steps can also have macro arguments. For instance, the previous step sequence could have two arguments called userid and password:
""" Given I landed in the homepage And I fill in "Username" with "<userid>" And I fill in "Password" with "<password>" And I click "Sign in" """
Using (invoking) a macro-step
A macro-step can only be invoked after its definition has been read by Cucumber.
The syntax rules for using a given macro-step in a scenario are pretty straightforward:
- Follow closely the syntax of the quoted sentence in the macro definition.
- Replace every <argument> in the phrase by its actual value between quotes.
Consider the following macro-step definition:
Given I define the step "When I [log in as <userid>]" to mean: """ # Sub-steps come here... """
Its quoted sentence is
"When I [log in as <userid>]", therefore
the macro-step can be invoked in a scenario like this:
Given I do this ... When I [log in as "jdoe"] And I do that...
Here is another -partial- macro-step definition:
Given I define the step "When I [travel from <origin> to <destination> via <stop>]" to mean: """ # Sub-steps come here... """
This macro-step can occur in a scenario as:
When I [travel from "San Francisco" to "New-York" via "Las Vegas"]
The actual values for the arguments origin, destination and stop are respectively San Francisco, New-York and Las Vegas.
Passing argument data via a table
Passing more than three arguments in the phrase becomes problematic from a readability viewpoint.
One ends up with lengthy and clumsy steps.
Therefore Macros4Cuke has an alternative way to pass data values via a Gherkin table.
To enable this mechanism for a given macro, ensure that in its definition the quoted sentence ends with a terminating colon (:) character.
The next example is based on one of the demo feature files:
# Next step has a colon ':' after the ']': data can be passed with a table Given I define the step "When I [enter my address as follows]:" to mean: """ When I fill in firstname with "<firstname>" And I fill in lastname with "<lastname>" And I fill in street with "<street_address>" And I fill in postcode with "<postcode>" And I fill in locality with "<city>" And I fill in country with "<country>" """
This step can be used like this:
When I [enter my address as follows]:" |lastname|Doe| |firstname|John| |street_address| Main Street, 22| |city| Old White Castle| |postcode|JK345|
Here are few observations worth noticing:
- The data table has two columns.
- Each row is of the form: |argument name| actual value|. For instance, the argument street_address takes
the value "Main Street, 22".
- Data rows don't have to follow strictly the order of the arguments in the sub-step sequence.
In line with most computer languages, Macros4Cuke accepts argument names containing alphanumeric characters and
In fact, the only characters that are not allowed in argument names are the following punctuation or delimiting signs:
Assigning a value to an argument
An argument appearing in the phrase MUST always be bound to a value at the step invokation. Taking again a previous example of a -partial- macro-step definition:
Given I define the step "When I [travel from <origin> to <destination> via <stop>]" to mean: """ # Sub-steps come here... """
The following step invokation is invalid:
When I [travel from "San Francisco" to via "Las Vegas"]
The issue is: the destination value is missing, Macros4Cuke won't be able to find a step with that syntax.
The next invokation is syntactically correct for Macros4Cuke:
When I [travel from "San Francisco" to "" via "Las Vegas"]
The destination argument gets an empty text as actual value.
For any argument that can receive a value through a data table, three situations can occur:
- A row for that argument together with a text value are specified at invokation. The argument is bound to that text value.
- A row for that argument and an empty text value are specified at invokation. The argument is bound to an empty text.
- There is no row for that argument. The argument is unbound (nil) but is rendered as an empty text.
Sub-steps with multiline text argument
- Question: is it possible to define a macro-step with a sub-step that itself
uses a multiline text argument (also called a docstring)?
- Answer: Yes but there is a catch.
Consider the following attempt of a macro-step definition:
Given I define the step "* I [make a long journey]" to mean: """ When I visit the cities: """ Amsterdam Brussels Copenhagen """ """
This will result in an error. The issue is caused by the nesting of triple quotes:
Cucumber simply doesn't allow this. In fact, the error is reported by Gherkin,
a component used by Cucumber.
As Gherkin has other issues with docstrings, we need a workaround today until the fixes are applied.
The workaround is the following:
- There exists in Macros4Cuke a predefined sub-step argument called <quotes> and its value
is set to a triple quote sequence """.
- Use it everywhere you want to place nested triple quotes.
Thus to make the previous example work, one must change it like follows:
Given I define the step "* I [make a long journey]" to mean: """ When I visit the cities: <quotes> Amsterdam Brussels Copenhagen <quotes> """
Conditional sections in substeps.
To make the macros more flexible, it is possible to define conditional sections in the substep sequence.
The general pattern for the conditional section is:
<?foobar> substep1 substep2 </foobar>
This works like this:
<?foobar> marks the begin of a conditional section. The end of that section is marked by
Anything that is in this section will be executed provided the argument
foobar has a value bound to it.
Stated otherwise, when
foobar has no value at invokation, then
substep2 will be skipped.
Conditional sections are useful for steps that are optional or for which an empty value '' isn't equal to no value. This is the case in user interface testing: skipping a field or entering a field and leaving it empty may lead to very different system behaviour (e.g. setting the focus in a field can trigger UI-events).
Consider the following example:
Given I define the step "* I [fill in the form with]:" to mean: """ When I fill in "first_name" with "<firstname>" And I fill in "last_name" with "<lastname>" And I fill in "street_address" with "<street_address>" And I fill in "zip" with "<postcode>" And I fill in "city" with "<city>" # Let's assume that e-mail is optional <?email> And I fill in "email" with "<email>" </email> And I click "Save" """
When invoked like this:
When I [fill in the form with]: |firstname |Alice| |lastname | Inn | |street_address| 11, No Street| |city| Nowhere-City| |country|Wonderland|
the following substep sequence is executed:
When I fill in "first_name" with "Alice" And I fill in "last_name" with "Inn" And I fill in "street_address" with "11, No Street" And I fill in "zip" with "" And I fill in "city" with "Nowhere-City" And I click "Save"
A few remarks concerning the executed sequence:
- Every macro argument (say, firstname) that takes a value (say, "Alice"), is replaced
that by that value in the substeps.
- Every macro argument (say, zip) that doesn't have a corresponding row in the data table,
is replaced by an empty text (look at the substep for the zip code entry).
- The substep with the email entry doesn't appear at all. This can be explained by the conditional section <?email>... that prevents the enclosed substep(s) to be generated in absence of a value for the email macro argument.
A typical use case for conditional sections is to prevent the execution of one or more steps in absence of a given data item. This simulates, for instance, the behaviour of a user that skips one or more widgets in a page/screen. From a user interface testing viewpoint, entering an empty text in an entry field may be noticeably different than skipping that same entry field. Think of specific UI-events that can trigger some special system response.
More samples and documentation can be found in the
features folder. It contains
many feature files and README.md -in Markdown format-.
Most of the material has been rewritten and adapted so that it can be consulted at the Relish website.
Relish -The living document- website is great to turn your feature files into an attractive documentation.
Listing all the macro definitions
When one begins to write macros spread over a large collection of feature files
it becomes interesting to have an overview, a list of all macro ever defined.
Therefore Macros4Cuke comes with a pre-defined step that generates such a list of macro definitions.
This specialized step has the following syntax:
When I want to list all the macros in the file "all_macros.feature"
all_macros.feature is a feature file that will be generated when Cucumber
terminates. The resulting feature file lists all the macros (one per scenario) in
the familiar Gherkin syntax. The file is placed in the current directory (i.e. the directory where
Cucumber was launched).
A word on Step Argument Transforms
Cucumber provides a handy facility that helps to convert implicitly the values of step arguments.
A first description of this lesser-known functionality is available at
Step Argument Transforms.
Does Macros4Cuke provide such a facility for its own macro-step arguments?
The answer is no: if macro-steps had their own kind of transformations, then these would have interfere with the ones defined directly in Cucumber. In fact, Cucumber will happily apply transformations on any step, including the macro definition steps and the steps invoking macros. Stated otherwise, all the rules pertaining to the Step Argument Transforms work as usual. Or almost. There is one very specific case where Cucumber behaves slightly differently: the transforms aren't applied when a sub-step is executed. Internally, Macros4Cuke calls the
Cucumber::RbSupport::RbWorld::#steps method that allows to run a Gherkin snippet (the substeps),
and it appears that this method does not trigger the transforms. In practice, this doesn't prevent the use of transforms together
with Macros4Cuke. In the vast majority of cases both will work fine as expected.
Q: Can I define a macro in one scenario and invoke it in another scenario in the same feature file?
A: Yes. Once a macro is defined in a feature file it can be invoked in any scenario that follows the definition.
In fact, the macro can be invoked in any scenario from any feature file, provided the invokation takes place after the macro definition.
Q: So, a macro can be shared between multiple files.
A: Indeed. This is similar to genuine step definitions which are global (accessible to every feature files). For macro-steps, again, they can be used anywhere after their definition.
Q: How should I pass arguments: via the phrase or a data table?
A: Both data passing mechanisms can be used at the same time. Favour data value passing via the phrase when the number of macro arguments is small (say, <= 2).
Q: Can I define a macro-step in a
A: No. Here is why: every step from the Background section is executed in each scenario (outline). If a macro were defined in the Background, then the macro definition will occur multiple times, which is flagged as an error by Macros4Cuke.
Q: Can I define a macro-step in a
A: No, if the scenario outline has multiple rows then an error will occur. Bear in mind, that steps in a scenario outline are repeating n times, n being the number of rows in the example table. Since a macro can only be defined once, placing a macro definition in a scenario outline will most likely cause an error.
Q: Can I invoke/call a macro-step in a
A: Yes. As a macro-step can be invoked multiple times.
Macros4Cuke's changelog is available here.
With great power comes great responsibility.
Our experience is that macro-steps change deeply the way one designs and writes feature files.
Macro-steps are most useful in UI-testing (e.g. with tools like Capybara) because they help to close the gap between the user's intent and the low-level user interface actions.
In addition Macros4Cuke allows advanced users to craft their own steps without having to program step definitions. This last argument becomes important in the context of user acceptance testing, a domain where the assumption that every tester is also Rubyist is -alas!- far from the truth.
Copyright (c) 2014-2019, Dimitri Geshef. Macros4Cuke is released under the MIT License see LICENSE.txt for details.