Class: Zlib::Inflate
Overview
Zlib:Inflate is the class for decompressing compressed data. Unlike Zlib::Deflate, an instance of this class is not able to duplicate (clone, dup) itself.
Class Method Summary collapse
-
.inflate ⇒ Object
call-seq: Zlib.inflate(string) Zlib::Inflate.inflate(string).
Instance Method Summary collapse
-
#<<(string) ⇒ Object
Inputs
string
into the inflate stream just like Zlib::Inflate#inflate, but returns the Zlib::Inflate object itself. -
#add_dictionary ⇒ Object
call-seq: add_dictionary(string).
-
#inflate ⇒ Object
call-seq: inflate(deflate_string) -> String inflate(deflate_string) { |chunk| … } -> nil.
-
#initialize ⇒ Object
constructor
call-seq: Zlib::Inflate.new(window_bits = Zlib::MAX_WBITS).
-
#set_dictionary ⇒ Object
Sets the preset dictionary and returns
string
. -
#sync(string) ⇒ Object
Inputs
string
into the end of input buffer and skips data until a full flush point can be found. -
#sync_point? ⇒ Boolean
Quoted verbatim from original documentation:.
Methods inherited from ZStream
#adler, #avail_in, #avail_out, #avail_out=, #close, #closed?, #data_type, #end, #ended?, #finish, #finished?, #flush_next_in, #flush_next_out, #reset, #stream_end?, #total_in, #total_out
Constructor Details
#initialize ⇒ Object
call-seq:
Zlib::Inflate.new(window_bits = Zlib::MAX_WBITS)
Creates a new inflate stream for decompression. window_bits
sets the size of the history buffer and can have the following values:
- 0
-
Have inflate use the window size from the zlib header of the compressed stream.
(8..15)
Overrides the window size of the inflate header in the compressed stream.
The window size must be greater than or equal to the window size of the
compressed stream.
- Greater than 15
-
Add 32 to window_bits to enable zlib and gzip decoding with automatic header detection, or add 16 to decode only the gzip format (a Zlib::DataError will be raised for a non-gzip stream).
- (-8..-15)
-
Enables raw deflate mode which will not generate a check value, and will not look for any check values for comparison at the end of the stream.
This is for use with other formats that use the deflate compressed data format such as zip which provide their own check values.
Example
open "compressed.file" do |compressed_io|
zi = Zlib::Inflate.new(Zlib::MAX_WBITS + 32)
begin
open "uncompressed.file", "w+" do |uncompressed_io|
uncompressed_io << zi.inflate(compressed_io.read)
end
ensure
zi.close
end
end
1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 |
# File 'zlib.c', line 1869
static VALUE
rb_inflate_initialize(int argc, VALUE *argv, VALUE obj)
{
struct zstream *z;
VALUE wbits;
int err;
rb_scan_args(argc, argv, "01", &wbits);
Data_Get_Struct(obj, struct zstream, z);
err = inflateInit2(&z->stream, ARG_WBITS(wbits));
if (err != Z_OK) {
raise_zlib_error(err, z->stream.msg);
}
ZSTREAM_READY(z);
return obj;
}
|
Class Method Details
.inflate ⇒ Object
call-seq:
Zlib.inflate(string)
Zlib::Inflate.inflate(string)
Decompresses string
. Raises a Zlib::NeedDict exception if a preset dictionary is needed for decompression.
This method is almost equivalent to the following code:
def inflate(string)
zstream = Zlib::Inflate.new
buf = zstream.inflate(string)
zstream.finish
zstream.close
buf
end
See also Zlib.deflate
1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 |
# File 'zlib.c', line 1922
static VALUE
rb_inflate_s_inflate(VALUE obj, VALUE src)
{
struct zstream z;
VALUE dst, args[2];
int err;
StringValue(src);
zstream_init_inflate(&z);
err = inflateInit(&z.stream);
if (err != Z_OK) {
raise_zlib_error(err, z.stream.msg);
}
ZSTREAM_READY(&z);
args[0] = (VALUE)&z;
args[1] = src;
dst = rb_ensure(inflate_run, (VALUE)args, zstream_end, (VALUE)&z);
OBJ_INFECT(dst, src);
return dst;
}
|
Instance Method Details
#<<(string) ⇒ Object
Inputs string
into the inflate stream just like Zlib::Inflate#inflate, but returns the Zlib::Inflate object itself. The output from the stream is preserved in output buffer.
2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 |
# File 'zlib.c', line 2051
static VALUE
rb_inflate_addstr(VALUE obj, VALUE src)
{
struct zstream *z = get_zstream(obj);
OBJ_INFECT(obj, src);
if (ZSTREAM_IS_FINISHED(z)) {
if (!NIL_P(src)) {
StringValue(src);
zstream_append_buffer2(z, src);
}
}
else {
do_inflate(z, src);
if (ZSTREAM_IS_FINISHED(z)) {
zstream_passthrough_input(z);
}
}
return obj;
}
|
#add_dictionary ⇒ Object
call-seq: add_dictionary(string)
Provide the inflate stream with a dictionary that may be required in the future. Multiple dictionaries may be provided. The inflate stream will automatically choose the correct user-provided dictionary based on the stream’s required dictionary.
1967 1968 1969 1970 1971 1972 1973 1974 1975 |
# File 'zlib.c', line 1967
static VALUE
rb_inflate_add_dictionary(VALUE obj, VALUE dictionary) {
VALUE dictionaries = rb_ivar_get(obj, id_dictionaries);
VALUE checksum = do_checksum(1, &dictionary, adler32);
rb_hash_aset(dictionaries, checksum, dictionary);
return obj;
}
|
#inflate ⇒ Object
call-seq:
inflate(deflate_string) -> String
inflate(deflate_string) { |chunk| ... } -> nil
Inputs deflate_string
into the inflate stream and returns the output from the stream. Calling this method, both the input and the output buffer of the stream are flushed. If string is nil
, this method finishes the stream, just like Zlib::ZStream#finish.
If a block is given consecutive inflated chunks from the deflate_string
are yielded to the block and nil
is returned.
Raises a Zlib::NeedDict exception if a preset dictionary is needed to decompress. Set the dictionary by Zlib::Inflate#set_dictionary and then call this method again with an empty string to flush the stream:
inflater = Zlib::Inflate.new
begin
out = inflater.inflate compressed
rescue Zlib::NeedDict
# ensure the dictionary matches the stream's required dictionary
raise unless inflater.adler == Zlib.adler32(dictionary)
inflater.set_dictionary dictionary
inflater.inflate ''
end
# ...
inflater.close
See also Zlib::Inflate.new
2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 |
# File 'zlib.c', line 2014
static VALUE
rb_inflate_inflate(VALUE obj, VALUE src)
{
struct zstream *z = get_zstream(obj);
VALUE dst;
OBJ_INFECT(obj, src);
if (ZSTREAM_IS_FINISHED(z)) {
if (NIL_P(src)) {
dst = zstream_detach_buffer(z);
}
else {
StringValue(src);
zstream_append_buffer2(z, src);
dst = rb_str_new(0, 0);
OBJ_INFECT(dst, obj);
}
}
else {
do_inflate(z, src);
dst = zstream_detach_buffer(z);
if (ZSTREAM_IS_FINISHED(z)) {
zstream_passthrough_input(z);
}
}
return dst;
}
|
#set_dictionary ⇒ Object
Sets the preset dictionary and returns string
. This method is available just only after a Zlib::NeedDict exception was raised. See zlib.h for details.
2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 |
# File 'zlib.c', line 2122
static VALUE
rb_inflate_set_dictionary(VALUE obj, VALUE dic)
{
struct zstream *z = get_zstream(obj);
VALUE src = dic;
int err;
OBJ_INFECT(obj, dic);
StringValue(src);
err = inflateSetDictionary(&z->stream,
(Bytef*)RSTRING_PTR(src), RSTRING_LENINT(src));
if (err != Z_OK) {
raise_zlib_error(err, z->stream.msg);
}
return dic;
}
|
#sync(string) ⇒ Object
Inputs string
into the end of input buffer and skips data until a full flush point can be found. If the point is found in the buffer, this method flushes the buffer and returns false. Otherwise it returns true
and the following data of full flush point is preserved in the buffer.
2082 2083 2084 2085 2086 2087 2088 2089 2090 |
# File 'zlib.c', line 2082
static VALUE
rb_inflate_sync(VALUE obj, VALUE src)
{
struct zstream *z = get_zstream(obj);
OBJ_INFECT(obj, src);
StringValue(src);
return zstream_sync(z, (Bytef*)RSTRING_PTR(src), RSTRING_LEN(src));
}
|
#sync_point? ⇒ Boolean
Quoted verbatim from original documentation:
What is this?
:)
2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 |
# File 'zlib.c', line 2099
static VALUE
rb_inflate_sync_point_p(VALUE obj)
{
struct zstream *z = get_zstream(obj);
int err;
err = inflateSyncPoint(&z->stream);
if (err == 1) {
return Qtrue;
}
if (err != Z_OK) {
raise_zlib_error(err, z->stream.msg);
}
return Qfalse;
}
|