Rerun

http://github.com/alexch/rerun

Rerun launches your program, then watches the filesystem. If a relevant file changes, then it restarts your program.

Rerun works for both long-running processes (e.g. apps) and short-running ones (e.g. tests). It's basically a no-frills command-line alternative to Guard, Shotgun, Autotest, etc. that doesn't require config files and works on any command, not just Ruby programs.

Rerun's advantage is its simple design. Since it uses exec and the standard Unix SIGINT and SIGKILL signals, you're sure the restarted app is really acting just like it was when you ran it from the command line the first time.

By default only *.{rb,js,css,coffee,scss,sass,erb,html,haml,ru,slim,md} files are watched. Use the --pattern option if you want to change this.

As of version 0.7.0, we use the Listen gem, which tries to use your OS's built-in facilities for monitoring the filesystem, so CPU use is very light.

Rerun does not work on Windows. Sorry, but you can't do much relaunching without "fork".

Installation:

    gem install rerun

("sudo" may be required on older systems, but try it without sudo first.)

If you are using RVM you might want to put this in your global gemset so it's available to all your apps. (There really should be a better way to distinguish gems-as-libraries from gems-as-tools.)

    rvm @global do gem install rerun

The Listen gem looks for certain platform-dependent gems, and will complain if they're not available. Unfortunately, Rubygems doesn't understand optional dependencies very well, so you may have to install extra gems (and/or put them in your Gemfile) to make Rerun work more smoothly on your system. (Learn more at https://github.com/guard/listen#listen-adapters.) For example, on Mac OS X, use

    gem install rb-fsevent

Usage:

    rerun [options] [--] cmd

For example, if you're running a Sinatra app whose main file is app.rb:

    rerun ruby app.rb

If the first part of the command is a .rb filename, then ruby is optional, so the above can also be accomplished like this:

    rerun app.rb

Rails doesn't automatically notice all config file changes, so you can force it to restart when you change a config file like this:

    rerun --dir config rails s

Or if you're using Thin to run a Rack app that's configured in config.ru but you want it on port 4000 and in debug mode, and only want to watch the app and web subdirectories:

    rerun --dir app,web -- thin start --debug --port=4000 -R config.ru

The -- is to separate rerun options from cmd options. You can also use a quoted string for the command, e.g.

    rerun --dir app "thin start --debug --port=4000 -R config.ru"

Rackup can also be used to launch a Rack server, so let's try that:

    rerun -- rackup --port 4000 config.ru

Want to mimic autotest? Try

    rerun -x rake

or

    rerun -cx rspec

And if you're using Spork with Rails, you need to restart your spork server whenever certain Rails environment files change, so why not put this in your Rakefile...

desc "run spork (via rerun)"
task :spork do
  sh "rerun --pattern '{Gemfile,Gemfile.lock,spec/spec_helper.rb,.rspec,spec/factories/**,config/environment.rb,config/environments/test.rb,config/initializers/*.rb,lib/**/*.rb}' -- spork"
end

and start using rake spork to launch your spork server?

(If you're using Guard instead of Rerun, check out guard-spork for a similar solution.)

How about regenerating your HTML files after every change to your Erector widgets?

    rerun -x erector --to-html my_site.rb

Use Heroku Cedar? rerun is now compatible with foreman. Run all your Procfile processes locally and restart them all when necessary.

    rerun foreman start

Options:

--dir directory (or directories) to watch (default = "."). Separate multiple paths with ',' and/or use multiple -d options.

--pattern glob to match inside directory. This uses the Ruby Dir glob style -- see http://www.ruby-doc.org/core/classes/Dir.html#M002322 for details. By default it watches files ending in: rb,js,css,coffee,scss,sass,erb,html,haml,ru,slim,md. On top of this, it also ignores dotfiles, .tmp files, and some other files and directories (like .git and log). Run rerun --help to see the actual list.

--ignore pattern file glob to ignore (can be set many times). To ignore a directory, you must append '/' e.g. `--ignore 'coverage/'`.

On top of --pattern and --ignore, we ignore any changes to files and dirs starting with a dot.

--signal (or -s) use specified signal (instead of the default SIGTERM) to terminate the previous process. This may be useful for forcing the respective process to terminate as quickly as possible. (--signal KILL is the equivalent of kill -9)

--clear (or -c) clear the screen before each run

--exit (or -x) expect the program to exit. With this option, rerun checks the return value; without it, rerun checks that the launched process is still running.

--background (or -b) disable on-the-fly commands, allowing the process to be backgrounded

--no-growl don't use growl

--name set the app name (for display)

Also --version and --help, naturally.

Growl Notifications

If you have growlnotify available on the PATH, it sends notifications to growl in addition to the console. If you have growl but don't want rerun to use it, set the --no-growl option.

Download growlnotify here now that Growl has moved to the App Store.

On-The-Fly Commands

While the app is (re)running, you can make things happen by pressing keys:

  • r -- restart (as if a file had changed)
  • c -- clear the screen
  • x or q -- exit (just like control-C)
  • p -- pause/unpause filesystem watching

If you're backgrounding or using Pry or a debugger, you might not want these keys to be trapped, so use the --background option.

Signals

The current algorithm for killing the process is:

  • send SIGTERM (or the value of the --signal option)
  • if that doesn't work after 4 seconds, send SIGINT (aka control-C)
  • if that doesn't work after 2 more seconds, send SIGKILL (aka kill -9)

This seems like the most gentle and unixy way of doing things, but it does mean that if your program ignores SIGTERM, it takes an extra 4 to 6 seconds to restart.

To Do:

Must have for v1.0

  • ".rerun" file to specify options per project or in $HOME.
  • Make sure to pass through quoted options correctly to target process [bug]
  • Optionally do "bundle install" before and "bundle exec" during launch

Nice to have

  • Smarter --signal option (specifying signal to try and a timeout to wait, repeated)
  • If the last element of the command is a .ru file and there's no other command then use rackup
  • Figure out an algorithm so "-x" is not needed (if possible) -- maybe by accepting a "--port" option or reading config.ru
  • Specify (or deduce) port to listen for to determine success of a web server launch

Wacky Ideas

Other projects that do similar things

Why would I use this instead of Shotgun?

Shotgun does a "fork" after the web framework has loaded but before your application is loaded. It then loads your app, processes a single request in the child process, then exits the child process.

Rerun launches the whole app, then when it's time to restart, uses "kill" to shut it down and starts the whole thing up again from scratch.

So rerun takes somewhat longer than Shotgun to restart the app, but does it much less frequently. And once it's running it behaves more normally and consistently with your production app.

Also, Shotgun reloads the app on every request, even if it doesn't need to. This is fine if you're loading a single file, but if your web pages all load other files (CSS, JS, media) then that adds up quickly. (I can only assume that the developers of shotgun are using caching or a front web server so this isn't a pain point for them.)

And hey, does Shotgun reload your Worker processes if you're using Foreman and a Procfile? I'm pretty sure it doesn't.

YMMV!

Why would I use this instead of Rack::Reloader?

Rack::Reloader is certifiably beautiful code, and is a very elegant use of Rack's middleware architecture. But because it relies on the LOADED_FEATURES variable, it only reloads .rb files that were 'require'd, not 'load'ed. That leaves out (non-Erector) template files, and also, at least the way I was doing it, sub-actions (see this thread).

Rack::Reloader also doesn't reload configuration changes or redo other things that happen during app startup. Rerun takes the attitude that if you want to restart an app, you should just restart the whole app. You know?

Why would I use this instead of Guard?

Guard is very powerful but requires some up-front configuration. Rerun is meant as a no-frills command-line alternative requiring no knowledge of Ruby nor config file syntax.

Why did you write this?

I've been using Sinatra and loving it. In order to simplify their system, the Rat Pack removed auto-reloading from Sinatra proper. I approve of this: a web application framework should be focused on serving requests, not on munging Ruby ObjectSpace for dev-time convenience. But I still wanted automatic reloading during development. Shotgun wasn't working for me (see above) so I spliced Rerun together out of code from Rspactor, FileSystemWatcher, and Shotgun -- with a heavy amount of refactoring and rewriting. In late 2012 I migrated the backend to the Listen gem, which was extracted from Guard, so it should be more reliable and performant on multiple platforms.

Credits

Rerun: Alex Chaffee, [email protected], http://github.com/alexch/

Based upon and/or inspired by:

Patches by:

Version History

  • v0.10.0 4 May 2014

    • add '.coffee,.slim,.md' to default pattern (thanks @xylinq)
    • --ignore option
  • v0.9.0 6 March 2014

    • --dir (or -d) can be specified more than once, for multiple directories (thanks again Barry!)
    • --name option
    • press 'p' to pause/unpause filesystem watching (Barry is the man!)
    • works with Listen 2 (note: needs 2.3 or higher)
    • cooldown works, thanks to patches to underlying Listen gem
    • ignore all dotfiles, and add actual list of ignored dirs and files
  • v0.8.2

    • bugfix, forcing Rerun to use Listen v1.0.3 while we work out the troubles we're having with Listen 1.3 and 2.1
  • v0.8.1

    • bugfix release (#30 and #34)
  • v0.8.0

    • --background option (thanks FND!) to disable the keyboard listener
    • --signal option (thanks FND!)
    • --no-growl option
    • --dir supports multiple directories (thanks Barry!)
  • v0.7.1

    • bugfix: make rails icon work again
  • v0.7.0

    • uses Listen gem (which uses rb-fsevent for lightweight filesystem snooping)

License

Open Source MIT License. See "LICENSE" file.