rbczmq - binding for the high level ZeroMQ C API <img src=“https://secure.travis-ci.org/methodmissing/rbczmq.png” alt=“Build Status” />

© 2011-2014 Lourens Naudé (methodmissing), James Tucker (raggi), Matt Connolly (mattconnolly) with API guidance from the czmq (czmq.zeromq.org/) project.

http://github.com/methodmissing/rbczmq

About ZeroMQ

In a nutshell, ZeroMQ is a hybrid networking library / concurrency framework. I quote the ØMQ Guide (zguide.zeromq.org/page:all) :

“ØMQ (ZeroMQ, 0MQ, zmq) looks like an embeddable networking library but acts like a concurrency framework. It gives you sockets that carry whole messages across various transports like in-process, inter-process, TCP, and multicast. You can connect sockets N-to-N with patterns like fanout, pub-sub, task distribution, and request-reply. It’s fast enough to be the fabric for clustered products. Its asynchronous I/O model gives you scalable multicore applications, built as asynchronous message-processing tasks. It has a score of language APIs and runs on most operating systems. ØMQ is from iMatix and is LGPL open source.”

Another ZeroMQ extension ?

This extension bundles both ZeroMQ (libzmq, www.zeromq.org/) and CZMQ (libczmq, czmq.zeromq.org/) and as such have no third party dependencies other than a Ruby distribution and a C compiler. My goals for this project were :

  • Access to a powerful messaging technology without having to install a bunch of dependencies

  • A stable and mostly version agnostic (2.x and 3.x series) API

  • Leverage and build upon a mature and maintained client (CZMQ)

  • Target Ruby distributions with a stable and comprehensive C API (MRI, Rubinius, JRuby is work in progress)

  • Support for running sockets in Threads - both green and native threads should be supported and preempt properly with edge-triggered multiplexing from libzmq.

  • Integrate with the Garbage Collector in a predictable way. CZMQ and the ZeroMQ framework is very fast and can allocate an enormous amount of objects in no time when using the Frame, Message and String wrappers. Resources such as socket connections should be cleaned up when objects are finalized as well.

  • Expose Message envelopes and Frames to developers as well to allow for higher level protocols and constructs.

  • Enforce well known best practices such as restricting socket interactions to within the thread the socket was created in etc.

Performance

ZeroMQ can have higher throughput than TCP in most cases by using a message batching technique. Please have a look through the Performance section in the ZeroMQ FAQ (www.zeromq.org/area:faq#toc2) for further implementation details.

Some notes about these benchmarks :

  • Messages go through the full network stack on localhost (TCP/IP transport)

  • The sender and receiver endpoints are Ruby processes which coerce transferred data to native String objects on both ends.

  • There’s thus a definite method dispatch cost in addition to intermittent pauses from the Garbage Collector

  • It’s still plenty fast for most soft real-time applications and we’re able to push in excess of 1 gigabits/s with the 1024 byte payloads. A language with automatic memory management cannot easily comply to hard real-time guarantees anyways.

TCP/IP loopback, 100k messages, 100 byte payloads

Lourenss-MacBook-Air:rbczmq lourens$ MSG_COUNT=100000 MSG_SIZE=100 ruby perf/pair.rb
Local pids: 2042
Remote pid: 2043
Sent 100000 messages in 0.3933s ...
[2043] Memory used before: 1128kb
[2043] Memory used after: 3012kb
[2042] Memory used before: 1120kb
====== [2042] transfer stats ======
message encoding: string
message size: 100 [B]
message count: 100000
mean throughput: 227978 [msg/s]
mean throughput: 182.383 [Mb/s]
[2042] Memory used after: 22432kb

TCP/IP loopback, 100k messages, 1024 byte payloads

Lourenss-MacBook-Air:rbczmq lourens$ MSG_COUNT=100000 MSG_SIZE=1024 ruby perf/pair.rb
Local pids: 2027
Remote pid: 2028
Sent 100000 messages in 0.641198s ...
[2028] Memory used before: 1120kb
[2028] Memory used after: 12776kb
[2027] Memory used before: 1144kb
====== [2027] transfer stats ======
message encoding: string
message size: 1024 [B]
message count: 100000
mean throughput: 160756 [msg/s]
mean throughput: 1316.919 [Mb/s]
[2027] Memory used after: 189004kb

TCP/IP loopback, 100k messages, 2048 byte payloads

Lourenss-MacBook-Air:rbczmq lourens$ MSG_COUNT=100000 MSG_SIZE=2048 ruby perf/pair.rb
Local pids: 2034
Remote pid: 2035
Sent 100000 messages in 0.94703s ...
[2035] Memory used before: 1140kb
[2035] Memory used after: 7212kb
[2034] Memory used before: 1128kb
====== [2034] transfer stats ======
message encoding: string
message size: 2048 [B]
message count: 100000
mean throughput: 123506 [msg/s]
mean throughput: 2023.528 [Mb/s]
[2034] Memory used after: 277712kb

Have a play around with the performance runner and other socket pairs as well - github.com/methodmissing/rbczmq/tree/master/perf

Usage

As a first step I’d highly recommend you read (and reread) through the zguide (zguide.zeromq.org/page:all) as understanding the supported messaging patterns and topologies is fundamental to getting the most from this binding. Here’s a few basic examples. Please refer to documentation (methodmissing.github.com/rbczmq/) and test cases (github.com/methodmissing/rbczmq/tree/master/test) for detailed usage information.

Basic send / receive, in process transport

ctx = ZMQ::Context.new
rep = ctx.socket(:PAIR)
port = rep.bind("inproc://send.receive")
req = ctx.socket(:PAIR)
req.connect("inproc://send.receive")
req.send("ping") # true
rep.recv # "ping"

ctx.destroy

Fair-queued work distribution to a set of worker threads

ctx = ZMQ::Context.new
push = ctx.bind(:PUSH, "inproc://push-pull-distribution.test")
threads = []
5.times do
  threads << Thread.new do
    pull = ctx.connect(:PULL, "inproc://push-pull-distribution.test")
    msg = pull.recv
    pull.close
    msg
  end
end

sleep 0.5 # avoid "slow joiner" syndrome
messages = %w(a b c d e f)
messages.each do |m|
  push.send m
end

threads.each{|t| t.join }
threads.all?{|t| messages.include?(t.value) } # true

ctx.destroy

Async request / reply routing

ctx = ZMQ::Context.new
router = ctx.bind(:ROUTER, "inproc://routing-flow.test")
dealer = ctx.socket(:DEALER)
dealer.identity = "xyz"
dealer.connect("inproc://routing-flow.test")

router.sendm("xyz")
router.send("request")
dealer.recv # "request"

dealer.send("reply")
router.recv # "xyz"
router.recv # "reply"

ctx.destroy

Send / receive frames

ctx = ZMQ::Context.new
rep = ctx.socket(:PAIR)
rep.bind("inproc://frames.test")
req = ctx.socket(:PAIR)
req.connect("inproc://frames.test")
ping = ZMQ::Frame("ping")
req.send_frame(ping) # true
rep.recv_frame # ZMQ::Frame("ping")
rep.send_frame(ZMQ::Frame("pong")) # true
req.recv_frame # ZMQ::Frame("pong")
rep.send_frame(ZMQ::Frame("pong")) # true
req.recv_frame_nonblock # nil
sleep 0.3
req.recv_frame_nonblock # ZMQ::Frame("pong")

ctx.destroy

Send / receive messages

ctx = ZMQ::Context.new
rep = ctx.socket(:PAIR)
rep.bind("inproc://messages.test")
req = ctx.socket(:PAIR)
req.connect("inproc://messages.test")

msg = ZMQ::Message.new
msg.push ZMQ::Frame("header")
msg.push ZMQ::Frame("body")

req.send_message(msg) # nil

recvd_msg = rep.recv_message
recvd_msg.class # ZMQ::Message
recvd_msg.pop # ZMQ::Frame("header")
recvd_msg.pop # ZMQ::Frame("body")

ctx.destroy

Resources

Requirements

  • A POSIX compliant OS, known to work well on Linux, BSD variants, Mac OS X and SmartOS.

  • Ruby MRI 1.9, 2.0 or Rubinius (JRuby capi support forthcoming)

  • A C compiler

  • This is a “fat” gem, including its own source code for both ZeroMQ and CZMQ libraries. No system installation of either library is required.

Installation

Rubygems installation

gem install rbczmq

Building from source

git clone https://github.com/methodmissing/rbczmq.git
cd rbczmq
git submodule init
git submodule update
rake

Running all tests

rake test

Running a single test file:

ruby -Ilib test/test_context.rb

OS X notes:

If you are installing the package on a new Mac ensure you have libtool and autoconf installed. You can get those with brew packaging system:

brew install libtool autoconf automake

LICENSE

The rbczmq gem is licensed under the MIT license. See the file “MIT-LICENSE” for details. This gem uses the “zmq” and “czmq” libraries, both of which are licensed under the LGPL license.

TODO

  • ZMQ::Message#save && ZMQ::Message.load

  • Optimize zloop handler callbacks (perftools)

  • Handle GC issue with timers in loop callbacks

  • czmq send methods aren’t non-blocking by default

  • Revisit the ZMQ::Loop API

  • RDOC fail on mixed C and Ruby source files that document that same constants

  • GC guards to prevent recycling objects being sent / received.

  • Watch out for further cases where REQ / REP pairs could raise EFSM

  • Do not clobber local scope from macros (James’s commit in master)

  • Incorporate examples into CI as well

  • Zero-copy semantics for frames

  • Enable use of a system installed ZeroMQ/CZMQ libraries.

Contact, feedback and bugs

This project is still work in progress and I’m looking for guidance on API design, use cases and any outlier experiences. Please log bugs and suggestions at github.com/methodmissing/rbczmq/issues