LiveAST

Summary

Live abstract syntax trees of methods and procs. Fork of live_ast (quix.github.com/live_ast).

Synopsis

require 'live_ast'

class Greet
  def default
    "hello"
  end
end

#### ASTs of methods

p Greet.instance_method(:default).to_ast
# => s(:defn, :default, s(:args), s(:str, "hello"))

#### ASTs of lambdas, procs, blocks

f = lambda { "foo" }
p f.to_ast
# => s(:iter, s(:call, nil, :lambda), 0, s(:str, "foo"))

def query(&block)
  p block.to_ast
  # => s(:iter, s(:call, nil, :query), 0, s(:str, "bar"))
end

query do
  "bar"
end

#### ASTs from dynamic code -- pure ruby version

u = ast_eval "lambda { 'dynamic3' }", binding
p u.to_ast
# => s(:iter, s(:call, nil, :lambda), 0, s(:str, "dynamic3"))

ast_eval "def v ; 'dynamic4' ; end", binding
p method(:v).to_ast
# => s(:defn, :v, s(:args), s(:str, "dynamic4"))

#### ASTs from dynamic code -- fully integrated version

require 'live_ast/full'

f = eval "lambda { 'dynamic1' }"
p f.to_ast
# => s(:iter, s(:call, nil, :lambda), 0, s(:str, "dynamic1"))

eval "def g ; 'dynamic2' ; end"
p method(:g).to_ast
# => s(:defn, :g, s(:args), s(:str, "dynamic2"))

Install

% gem install mvz-live_ast

Description

LiveAST enables a program to find the ASTs of objects created by dynamically generated code. It may be used in a strictly noninvasive manner, where no standard classes or methods are modified, or it may be transparently integrated into Ruby. The default setting is in between.

RubyParser is the default parsing engine. To replace it with Ripper, gem install live_ast_ripper and then require 'live_ast_ripper'. A simple plug-in interface allows LiveAST to work with any parser.

The advantage of RubyParser is that it gives the traditional ParseTree sexps used by tools such as ruby2ruby.

LiveAST is thread-safe.

Ruby 2.3.0 or higher is required.

to_ruby

When the default parser is active,

require 'live_ast/to_ruby'

will define the to_ruby method for the Method, UnboundMethod, and Proc classes. These methods are one-liners which pass the extracted ASTs to ruby2ruby.

require 'live_ast/to_ruby'

p lambda { |x, y| x + y }.to_ruby # => "lambda { |x, y| (x + y) }"

class A
  def f
    "A#f"
  end
end

p A.instance_method(:f).to_ruby # => "def f\n  \"A#f\"\nend"

In general, to_ruby will hook into the unparser provided by the parser plug-in, if one is found.

Pure Ruby and ast_eval

An essential feature of require 'live_ast' is that it is implemented in pure ruby. However since pure ruby is not powerful enough to replace eval, in this case ast_eval must be used instead of eval for AST-accessible objects. ast_eval has the same semantics as eval except that the binding argument is required.

require 'live_ast'

u = ast_eval "lambda { 'dynamic3' }", binding
p u.to_ast
# => s(:iter, s(:call, nil, :lambda), 0, s(:str, "dynamic3"))

Full Integration

In order for LiveAST to be transparent to the user, eval must be replaced. This is accomplished with the help of the binding_of_caller gem (github.com/banister/binding_of_caller).

To replace eval,

require 'live_ast/full'

The new AST-electrified eval, instance_eval, module_eval, class_eval, and Binding#eval all pass RubySpec (rubyspec.org) with the minor exception of backtraces sometimes not matching that of the original eval (see the “Backtraces” section below for details).

require 'live_ast/full'

f = eval "lambda { 'dynamic1' }"
p f.to_ast
# => s(:iter, s(:call, nil, :lambda), 0, s(:str, "dynamic1"))

Since LiveAST itself is pure ruby, any platforms supported by binding_of_caller should work with live_ast/full.

Limitations

A method or block definition must not share a line with other methods or blocks in order for its AST to be accessible.

require 'live_ast'

class A
  def f ; end ; def g ; end
end
A.instance_method(:f).to_ast # => raises LiveAST::MultipleDefinitionsOnSameLineError

a = lambda { } ; b = lambda { }
a.to_ast # => raises LiveAST::MultipleDefinitionsOnSameLineError

Code given to the -e command-line switch is not AST-accessible.

Evaled code appearing before require 'live_ast/full' is not AST-accessible.

In some circumstances ast_eval and the replaced eval will not give the same backtrace as the original eval (next section).


Technical Issues

You can probably skip these next sections. Goodbye.


Backtraces

ast_eval is meant to be compatible with eval. For instance the first line of ast_eval‘s backtrace should be identical to that of eval:

require 'live_ast'

ast_eval %{ raise "boom" }, binding
# => test.rb:3:in `<main>': boom (RuntimeError)

Let’s make a slight change,

require 'live_ast'

f = ast_eval %{ lambda { raise "boom" } }, binding
f.call
# => test.rb|ast@a:3:in `block in <main>': boom (RuntimeError)

What the heck is ‘|ast@a’ doing there? LiveAST’s implementation has just been exposed: each source input is assigned a unique key which enables a Ruby object to find its own definition.

In the first case above, ast_eval has removed the key from the exception backtrace. But in the second case there is no opportunity to remove it since ast_eval has already returned.

If you find this to be problem—for example if you cannot add a filter for the jump-to-location feature in your editor—then raise may be redefined to strip these tokens,

require 'live_ast'
require 'live_ast/replace_raise'

f = ast_eval %{ lambda { raise "boom" } }, binding
f.call
# => test.rb:4:in `block in <main>': boom (RuntimeError)

However this only applies to a raise call originating from Ruby code. An exception from within a native method will likely still contain the token in its backtrace (e.g., in MRI the exception raised by 1/0 comes from C).

Replacing the Parser

Despite its name, LiveAST knows nothing about ASTs. It merely reports what it finds in the line-to-AST hash returned by the parser’s parse method. Replacing the parser class is therefore easy: the only specification is that the parse instance method return such a hash.

To override the default parser with your own,

LiveAST.parser = YourParser

To test it, provide some examples of what the ASTs look like in YourParser::Test. See live_ast/ruby_parser for reference.

Noninvasive Mode

For safety purposes, require 'live_ast' performs the invasive act of redefining load (but not require); otherwise bad things can happen to the unwary. The addition of to_ast to a few standard Ruby classes is also a meddlesome move.

To avoid these modifications,

require 'live_ast/base'

will provide the essentials of LiveAST but will not touch core classes or methods.

To select features individually,

require 'live_ast/to_ast'       # define to_ast for Method, UnboundMethod, Proc
require 'live_ast/to_ruby'      # define to_ruby for Method, UnboundMethod, Proc
require 'live_ast/ast_eval'     # define Kernel#ast_eval
require 'live_ast/ast_load'     # define Kernel#ast_load (mentioned below)
require 'live_ast/replace_load' # redefine Kernel#load

Noninvasive Interface

The following alternative interface is available.

require 'live_ast/base'

class A
  def f
    "A#f"
  end
end

p LiveAST.ast(A.instance_method(:f))
# => s(:defn, :f, s(:args), s(:str, "A#f"))

p LiveAST.ast(lambda { })
# => s(:iter, s(:call, nil, :lambda), 0)

f = LiveAST.eval("lambda { }", binding)

p LiveAST.ast(f) 
# => s(:iter, s(:call, nil, :lambda), 0)

ast_eval  # => raises NameError

Reloading Files In Noninvasive Mode

Use ast_load or (equivalently) LiveAST.load when reloading an AST-aware file.

require 'live_ast/ast_load'
require 'live_ast/to_ast'

require "foo"
Foo.instance_method(:bar).to_ast  # caches AST

# ... the bar method is changed in foo.rb ...

ast_load "foo.rb"
p Foo.instance_method(:bar).to_ast  # => updated AST

Note if load is called instead of ast_load then the last line will give the old AST,

load "foo.rb"                       # oops! forgot to use ast_load
p Foo.instance_method(:bar).to_ast  # => stale AST

Realize that foo.rb may be referenced by an unknown number of methods and blocks. If the original foo.rb source were dumped in favor of the modified foo.rb, then an unknown number of those references would be invalidated (and some may even point to the wrong AST).

This is the reason for the caching that results in the stale AST above. It should now be clear why the default behavior of require 'live_ast' is to redefine load: doing so prevents this problem entirely. On the other hand if it is fully known where files are being reloaded (if at all) then there’s no need for paranoia; the noninvasive option may be the most appropriate.

The Source/AST Cache

ast_eval and load cache all incoming code, while required files are cached on a need-to-know basis. When an AST is requested, the corresponding source file is parsed and discarded, leaving behind method and block ASTs. to_ast fetches an AST from the cache and attaches it to the appropriate object (a Proc or Module).

Ignored, unextracted ASTs will therefore linger in the cache. Since sexps are generally small there is little need for concern unless one is continually evaling/reloading. Nevertheless it is possible that old ASTs will eventually need to be garbage collected. To flush the cache,

(1) Check that to_ast has been called on all objects whose ASTs are desired.

(2) Call LiveAST.flush_cache.

Calling to_ast prevents the object’s AST from being flushed (since it grafts the AST onto the object).

ASTs of procs and methods whose sources lie in required files will never be flushed. However a method redefined via ast_eval or load is susceptible to flush_cache even when its original definition pointed to a required file.

About require

No measures have been taken to detect manipulations of $LOADED_FEATURES which would cause require to load the same file twice. Though require could be replaced in similar fashion to load—heading off problems arising from such “raw” reloads—the overhead would seem inappropriate in relation to the rarity of this case.

Therefore the working assumption is that require will load a file only once. Furthermore, if a file has not been reloaded then it is assumed that the file is unmodified between the moment it is required and the moment the first AST is pulled from it.

Authors

License

Copyright (c) 2011 James M. Lawrence. All rights reserved.
Copyright (c) 2014 Matijs van Zuijlen. All rights reserved.

Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation files
(the "Software"), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software,
and to permit persons to whom the Software is furnished to do so,
subject to the following conditions:

The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.

LiveAST includes the source code of live_ast_ruby_parser, which is licensed as follows:

Copyright (c) 2011 James M. Lawrence. All rights reserved.

Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation files
(the "Software"), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software,
and to permit persons to whom the Software is furnished to do so,
subject to the following conditions:

The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.