Kitchen::Vagrant

Gem Version Build Status Code Climate Test Coverage

A Test Kitchen Driver for Vagrant.

This driver works by generating a single Vagrantfile for each instance in a sandboxed directory. Since the Vagrantfile is written out on disk, Vagrant needs absolutely no knowledge of Test Kitchen. So no Vagrant plugins are required.

Requirements

Vagrant

A Vagrant version of 1.1.0 or higher is required for this driver which means that a native package must be installed on the system running Test Kitchen.

Note: If you have previously installed Vagrant as a gem (a version prior to 1.1.0), this version may be resolved first in your PATH. If you receive an error message that Vagrant is too old despite having installed Vagrant as a package, you may be required to uninstall the gem version or modify your PATH environment. If you require the vagrant gem for older projects you should consider the vagrant-wrapper gem which helps manage both styles of Vagrant installations (background details).

If you are creating Windows VMs over a WinRM Transport, then the vagrant-winrm Vagrant plugin must be installed. As a consequence, the minimum version of Vagrant required is 1.6 or higher.

Virtualization Hypervisor(s)

Currently this driver supports Parallels, VirtualBox, and VMware Fusion/Workstation hypervisors. VirtualBox is free and is the default provider for Vagrant.

VirtualBox package

If you would like to use VMware Fusion/Workstation you must purchase the software from VMware and then must also purchase the Vagrant VMware plugin.

Vagrant VMware Plugin

VMware Fusion

VMware Workstation

If you would like to use Parallels Desktop you must also purchase the software but the vagrant-parallels plugin is freely available.

Parallels Desktop for Mac

Vagrant Parallels Provider

Installation and Setup

Please read the Driver usage page for more details.

Default Configuration

For a select number of platforms and a select number of hypervisors (VirtualBox, VMware, and Parallels) default boxes are published under the Bento organization on Atlas such as:

---
platforms:
  - name: ubuntu-16.04
  - name: centos-7.3
  - name: freebsd-11

This will effectively generate a configuration similar to:

---
platforms:
  - name: ubuntu-16.04
    driver:
      box: bento/ubuntu-16.04
  - name: centos-7.3
    driver:
      box: bento/centos-7.3
  - name: freebsd-11.0
    driver:
      box: bento/freebsd-11.0
  # ...

Any other platform names will set a more reasonable default for box and leave box_url unset. For example:

---
platforms:
  - name: slackware-14.1
  - name: openbsd-5.6
  - name: windows-2012r2

This will effectively generate a configuration similar to:

---
platforms:
  - name: slackware-14.1
    driver:
      box: slackware-14.1
  - name: openbsd-5.6
    driver:
      box: openbsd-5.6
  - name: windows-2012r2
    driver:
      box: windows-2012r2

Many host wide defaults for Vagrant can be set using $HOME/.vagrant.d/Vagrantfile. See the Vagrantfile documentation for more information.

Configuration

cachier

Enable and configure scope for vagrant-cachier plugin. Valid options are :box or :machine, setting to a truthy value yields :box

For example:

---
driver:
  cachier: true

will generate a Vagrantfile configuration similar to:

  config.cache.scope = :box

The default is nil, indicating unset.

box

Required This determines which Vagrant box will be used. For more details, please read the Vagrant machine settings page.

The default will be computed from the platform name of the instance. However, for a number of common platforms in the Bento project, the default will prefix the name with bento/ in accordance with Atlas naming standards.

For example, a platform with name ubuntu-16.04 will produce a default box value of bento/ubuntu-16.04. Alternatively, a box called slackware-14.1 will produce a default box value of slackware-14.1.

box_check_update

Whether to check for box updates (enabled by default).

box_url

A box_url is not required when using the Atlas format of bento/ubuntu-16.04 assuming the organization and box referenced exist. If using a custom box this can be an https:// or file:// URL.

box_download_ca_cert

Path relative to the .kitchen.yml file for locating the trusted CA bundle. Useful when combined with box_url.

The default is nil, indicating to use the default Mozilla CA cert bundle. See also box_download_insecure.

box_download_insecure

If true, then SSL certificates from the server will not be verified.

The default is false, meaning if the URL is an HTTPS URL, then SSL certs will be verified.

box_version

The version of the configured box.

The default is nil, indicating unset.

This option is only relevant when used with Atlas boxes which support versioning.

communicator

Note: It should largely be the responsibility of the underlying Vagrant base box to properly set the config.vm.communicator value. For example, if the base box is a Windows operating system and does not have an SSH service installed and enabled, then Vagrant will be unable to even boot it (using vagrant up), without a custom Vagrantfile. If you are authoring a base box, please take care to set your value for communicator to give your users the best possible out-of-the-box experience.

For overriding the default communicator setting of the base box.

For example:

---
driver:
  communicator: ssh

will generate a Vagrantfile configuration similar to:

  config.vm.communicator = "ssh"

The default is nil assuming ssh will be used.

customize

A Hash of customizations to a Vagrant virtual machine. Each key/value pair will be passed to your providers customization block. For example, with the default virtualbox provider:

---
driver:
  customize:
    memory: 1024
    cpuexecutioncap: 50

will generate a Vagrantfile configuration similar to:

Vagrant.configure("2") do |config|
  # ...

  config.vm.provider :virtualbox do |virtualbox|
    virtualbox.customize ["modifyvm", :id, "--memory", "1024"]
    virtualbox.customize ["modifyvm", :id, "--cpuexecutioncap", "50"]
  end
end

Please read the "Customizations" sections for VirtualBox and VMware for more details.

VirtualBox additional disk

Adding the createhd and storageattach keys in customize allows for creation of an additional disk in VirtualBox. Full paths must be used as required by VirtualBox.

NOTE: IDE Controller based drives always show up in the boot order first, regardless of if they are bootable.

driver:
  customize:
    createhd:
      filename: /tmp/disk1.vmdk
      size: 1024
    storageattach:
      storagectl: SATA Controller
      port: 1
      device: 0
      type: hdd
      medium: /tmp/disk1.vmdk

will generate a Vagrantfile configuration similar to:

Vagrant.configure("2") do |config|
  # ...

  config.vm.provider :virtualbox do |virtualbox|
    virtualbox.customize ["createhd", "--filename", "./tmp/disk1.vmdk", "--size", 1024]
    virtualbox.customize ["storageattach", :id, "--storagectl", "IDE Controller", "--port", "1", "--device", 0, "--type", "hdd", "--medium", "./tmp/disk1.vmdk"]
  end
end

Please read createhd and storageattach for additional information on these options.

guest

Note: It should largely be the responsibility of the underlying Vagrant base box to properly set the config.vm.guest value. For example, if the base box is a Windows operating system, then Vagrant will be unable to even boot it (using vagrant up), without a custom Vagrantfile. If you are authoring a base box, please take care to set your value for communicator to give your users the best possible out-of-the-box experience.

For overriding the default guest setting of the base box.

The default is unset, or nil.

gui

Allows GUI mode for each defined platform. Default is nil. Value is passed to the config.vm.provider but only for the VirtualBox and VMware-based providers.

---
platforms:
  - name: ubuntu-16.04
    driver:
      gui: true

will generate a Vagrantfile configuration similar to:

Vagrant.configure("2") do |config|
  # ...

  c.vm.provider :virtualbox do |p|
    p.gui = true
  end
end

For more info about GUI vs. Headless mode please see vagrant configuration docs

linked_clone

Allows to use linked clones to import boxes for VirtualBox, VMware and Parallels Desktop. Default is nil.

---
platforms:
  - name: ubuntu-16.04
    driver:
      linked_clone: true

will generate a Vagrantfile configuration similar to:

Vagrant.configure("2") do |config|
  # ...

  c.vm.provider :virtualbox do |p|
    p.linked_clone = true
  end
end

network

An Array of network customizations for the virtual machine. Each Array element is itself an Array of arguments to be passed to the config.vm.network method. For example:

---
driver:
  network:
    - ["forwarded_port", {guest: 80, host: 8080}]
    - ["private_network", {ip: "192.168.33.33"}]

will generate a Vagrantfile configuration similar to:

Vagrant.configure("2") do |config|
  # ...

  config.vm.network :forwarded_port, guest: 80, host: 8080
  config.vm.network :private_network, ip: "192.168.33.33"
end

Please read the Vagrant networking basic usage page for more details.

The default is an empty Array, [].

pre_create_command

An optional hook to run a command immediately prior to the vagrant up --no-provisioner command being executed.

There is an optional token, {{vagrant_root}} that can be used in the pre_create_command string which will be expanded by the driver to be the full path to the sandboxed Vagrant root directory containing the Vagrantfile. This command will be executed from the directory containing the .kitchen.yml file, or the kitchen_root.

For example, if your project requires Bindler, this command could be:

---
driver
  pre_create_command: cp .vagrant_plugins.json {{vagrant_root}}/ && vagrant plugin bundle

The default is unset, or nil.

provider

This determines which Vagrant provider to use. The value should match the provider name in Vagrant. For example, to use VMware Fusion the provider should be vmware_fusion. Please see the docs on providers for further details.

By default the value is unset, or nil. In this case the driver will use the Vagrant default provider which at this current time is virtualbox unless set by VAGRANT_DEFAULT_PROVIDER environment variable.

provision

Set to true if you want to do the provision of vagrant in create. Useful in case of you want to customize the OS in provision phase of vagrant

ssh_key

This is the path to the private key file used for SSH authentication if you would like to use your own private ssh key instead of the default vagrant insecure private key.

If this value is a relative path, then it will be expanded relative to the location of the main Vagrantfile. If this value is nil, then the default insecure private key that ships with Vagrant will be used.

The default value is unset, or nil.

synced_folders

Allow the user to specify a collection of synced folders on each Vagrant instance. Source paths can be relative to the kitchen root.

The default is an empty Array, or []. The example:

---
driver:
  synced_folders:
    - ["data/%{instance_name}", "/opt/instance_data"]
    - ["/host_path", "/vm_path", "create: true, type: :nfs"]

will generate a Vagrantfile configuration similar to:

Vagrant.configure("2") do |config|
  # ...

  c.vm.synced_folder "/Users/mray/cookbooks/pxe_dust/data/default-ubuntu-1204", "/opt/instance_data"
  c.vm.synced_folder "/host_path", "/vm_path", create: true, type: :nfs
end

cache_directory

Customize the cache directory on the instance. This parameter must be an absolute path.

The defaults are:

  • Windows: C:\\omnibus\\cache
  • Unix: /tmp/omnibus/cache

The example:

---
driver:
  cache_directory: Z:\\custom\\cache

vagrantfile_erb

An alternate Vagrantfile ERB template that will be rendered for use by this driver. The binding context for the ERB processing is that of the Driver object, which means that methods like config[:kitchen_root], instance.name, and instance.provisioner[:run_list] can be used to compose a custom Vagrantfile if necessary.

Warning: Be cautious when going down this road as your setup may cease to be portable or applicable to other Test Kitchen Drivers such as Ec2 or Docker. Using the alternative Vagrantfile template strategy may be a dangerous road--be aware.

The default is to use a template which ships with this gem.

vagrantfiles

An array of paths to other Vagrantfiles to be merged with the default one. The paths can be absolute or relative to the .kitchen.yml file.

Note: the Vagrantfiles must have a .rb extension to satisfy Ruby's Kernel#require.

---
driver:
  vagrantfiles:
    - VagrantfileA.rb
    - /tmp/VagrantfileB.rb

vm_hostname

Sets the internal hostname for the instance. This is not used when connecting to the Vagrant virtual machine.

For more details on this setting please read the config.vm.hostname section of the Vagrant documentation.

To prevent this value from being rendered in the default Vagrantfile, you can set this value to false.

The default will be computed from the name of the instance. For example, the instance was called "default-fuzz-9" will produce a default vm_hostname value of "default-fuzz-9". For Windows-based platforms, a default of nil is used to save on boot time and potential rebooting.

Development

Pull requests are very welcome! Make sure your patches are well tested. Ideally create a topic branch for every separate change you make. For example:

  1. Fork the repo
  2. Create your feature branch (git checkout -b my-new-feature)
  3. Commit your changes (git commit -am 'Added some feature')
  4. Push to the branch (git push origin my-new-feature)
  5. Create new Pull Request

Authors

Created by Fletcher Nichol ([email protected])

License

Apache 2.0 (see LICENSE)