Deterministic

Deterministic is to help your code to be more confident, by utilizing functional programming patterns.

This is a spiritual successor of the Monadic gem. The goal of the rewrite is to get away from a bit too forceful aproach I took in Monadic, especially when it comes to coercing monads, but also a more practical but at the same time more strict adherence to monad laws.

Patterns

Deterministic provides different monads, here is a short guide, when to use which

Result: Success & Failure

• an operation which can succeed or fail
• the result (content) of of the success or failure is important
• you are building one thing
• chaining: if one fails (Failure), don't execute the rest

Option: Some & None

• an operation which returns either some result or nothing
• in case it returns nothing it is not important to know why
• you are working rather with a collection of things
• chaining: execute all and then select the successful ones (Some)

Either: Left & Right

• an operation which returns several good and bad results
• the results of both are important
• chaining: if one fails, continue, the content of the failed and successful are important

Maybe

• an object may be nil, you want to avoid endless nil? checks

Enums (Algebraic Data Types)

• roll your own pattern

Usage

Result: Success & Failure

Success(1).to_s                        # => "1"
Success(Success(1))                    # => Success(1)

Failure(1).to_s                        # => "1"
Failure(Failure(1))                    # => Failure(1)

Maps a Result with the value a to the same Result with the value b.

Success(1).fmap { |v| v + 1}           # => Success(2)
Failure(1).fmap { |v| v - 1}           # => Failure(0)

Maps a Result with the value a to another Result with the value b.

Success(1).bind { |v| Failure(v + 1) } # => Failure(2)
Failure(1).bind { |v| Success(v - 1) } # => Success(0)

Maps a Success with the value a to another Result with the value b. It works like #bind but only on Success.

Success(1).map { |n| Success(n + 1) }  # => Success(2)
Failure(0).map { |n| Success(n + 1) }  # => Failure(0)

Maps a Failure with the value a to another Result with the value b. It works like #bind but only on Failure.

Failure(1).map_err { |n| Success(n + 1) } # => Success(2)
Success(0).map_err { |n| Success(n + 1) } # => Success(0)

Success(0).try { |n| raise "Error" }   # => Failure(Error)

Replaces Success a with Result b. If a Failure is passed as argument, it is ignored.

Success(1).and Success(2)              # => Success(2)
Failure(1).and Success(2)              # => Failure(1)

Replaces Success a with the result of the block. If a Failure is passed as argument, it is ignored.

Success(1).and_then { Success(2) }     # => Success(2)
Failure(1).and_then { Success(2) }     # => Failure(1)

Replaces Failure a with Result. If a Failure is passed as argument, it is ignored.

Success(1).or Success(2)               # => Success(1)
Failure(1).or Success(1)               # => Success(1)

Replaces Failure a with the result of the block. If a Success is passed as argument, it is ignored.

Success(1).or_else { Success(2) }      # => Success(1)
Failure(1).or_else { |n| Success(n)}   # => Success(1)

Executes the block passed, but completely ignores its result. If an error is raised within the block it will NOT be catched.

Try failable operations to return Success or Failure

include Deterministic::Prelude::Result

try! { 1 }                             # => Success(1)
try! { raise "hell" }                  # => Failure(#<RuntimeError: hell>)

Result Chaining

You can easily chain the execution of several operations. Here we got some nice function composition.
The method must be a unary function, i.e. it always takes one parameter - the context, which is passed from call to call.

The following aliases are defined

alias :>> :map
alias :<< :pipe

This allows the composition of procs or lambdas and thus allow a clear definiton of a pipeline.

Success(params) >>
  validate >>
  build_request << log >>
  send << log >>
  build_response

Complex Example in a Builder Class

class Foo
  include Deterministic
  alias :m :method # method conveniently returns a Proc to a method

  def call(params)
    Success(params) >> m(:validate) >> m(:send)
  end

  def validate(params)
    # do stuff
    Success(validate_and_cleansed_params)
  end

  def send(clean_params)
    # do stuff
    Success(result)
  end
end

Foo.new.call # Success(3)

Chaining works with blocks (#map is an alias for #>>)

Success(1).map {|ctx| Success(ctx + 1)}

it also works with lambdas

Success(1) >> ->(ctx) { Success(ctx + 1) } >> ->(ctx) { Success(ctx + 1) }

and it will break the chain of execution, when it encounters a Failure on its way

def works(ctx)
  Success(1)
end

def breaks(ctx)
  Failure(2)
end

def never_executed(ctx)
  Success(99)
end

Success(0) >> method(:works) >> method(:breaks) >> method(:never_executed) # Failure(2)

#map aka #>> will not catch any exceptions raised. If you want automatic exception handling, the #try aka #>= will catch an error and wrap it with a failure

def error(ctx)
  raise "error #{ctx}"
end

Success(1) >= method(:error) # Failure(RuntimeError(error 1))

Pattern matching

Now that you have some result, you want to control flow by providing patterns. #match can match by

• success, failure, result or any
• values
• lambdas
• classes

Success(1).match do
  Success() { |s| "success #{s}"}
  Failure() { |f| "failure #{f}"}
end # => "success 1"

Note1: the variant's inner value(s) have been unwrapped, and passed to the block.

Note2: only the first matching pattern block will be executed, so order can be important.

Note3: you can omit block parameters if you don't use them, or you can use _ to signify that you don't care about their values. If you specify parameters, their number must match the number of values in the variant.

The result returned will be the result of the first #try or #let. As a side note, #try is a monad, #let is a functor.

Guards

Success(1).match do
  Success(where { s == 1 }) { |s| "Success #{s}" }
end # => "Success 1"

Note1: the guard has access to variable names defined by the block arguments.

Note2: the guard is not evaluated using the enclosing context's self; if you need to call methods on the enclosing scope, you must specify a receiver.

Also you can match the result class

Success([1, 2, 3]).match do
  Success(where { s.is_a?(Array) }) { |s| s.first }
end # => 1

If no match was found a NoMatchError is raised, so make sure you always cover all possible outcomes.

Success(1).match do
  Failure() { |f| "you'll never get me" }
end # => NoMatchError

Matches must be exhaustive, otherwise an error will be raised, showing the variants which have not been covered.

core_ext

You can use a core extension, to include Result in your own class or in Object, i.e. in all classes.

require 'deterministic/core_ext/object/result'

[1].success?        # => false
Success(1).failure? # => false
Success(1).success? # => true
Failure(1).result?  # => true

Option

Some(1).some?                          # #=> true
Some(1).none?                          # #=> false
None.some?                             # #=> false
None.none?                             # #=> true

Maps an Option with the value a to the same Option with the value b.

Some(1).fmap { |n| n + 1 }             # => Some(2)
None.fmap { |n| n + 1 }                # => None

Maps a Result with the value a to another Result with the value b.

Some(1).map  { |n| Some(n + 1) }       # => Some(2)
Some(1).map  { |n| None }              # => None
None.map     { |n| Some(n + 1) }       # => None

Get the inner value or provide a default for a None. Calling #value on a None will raise a NoMethodError

Some(1).value                          # => 1
Some(1).value_or(2)                    # => 1
None.value                             # => NoMethodError
None.value_or(0)                       # => 0

Add the inner values of option using +.

Some(1) + Some(1)                      # => Some(2)
Some([1]) + Some(1)                    # => TypeError: No implicit conversion
None + Some(1)                         # => Some(1)
Some(1) + None                         # => Some(1)
Some([1]) + None + Some([2])           # => Some([1, 2])

Coercion

Option.any?(nil)                       # => None
Option.any?([])                        # => None
Option.any?({})                        # => None
Option.any?(1)                         # => Some(1)

Option.some?(nil)                      # => None
Option.some?([])                       # => Some([])
Option.some?({})                       # => Some({})
Option.some?(1)                        # => Some(1)

Option.try! { 1 }                      # => Some(1)
Option.try! { raise "error"}           # => None

Pattern Matching

Some(1).match {
  Some(where { s == 1 }) { |s| s + 1 }
  Some()                 { |s| 1 }
  None()                 { 0 }
}                                      # => 2

Enums

All the above are implemented using enums, see their definition, for more details.

Define it, with all variants:

Threenum = Deterministic::enum {
            Nullary()
            Unary(:a)
            Binary(:a, :b)
           }

Threenum.variants                      # => [:Nullary, :Unary, :Binary]

Initialize

n = Threenum.Nullary                   # => Threenum::Nullary.new()
n.value                                # => Error

u = Threenum.Unary(1)                  # => Threenum::Unary.new(1)
u.value                                # => 1

b = Threenum::Binary(2, 3)             # => Threenum::Binary(2, 3)
b.value                                # => { a:2, b: 3 }

Pattern matching

Threenum::Unary(5).match {
  Nullary() {        0 }
  Unary()   { |u|    u }
  Binary()  { |a, b| a + b }
}                                      # => 5

# or
t = Threenum::Unary(5)
Threenum.match(t) {
  Nullary() {        0 }
  Unary()   { |u|    u }
  Binary()  { |a, b| a + b }
}                                      # => 5

If you want to return the whole matched object, you'll need to pass a reference to the object (second case). Note that self refers to the scope enclosing the match call.

def drop(n)
  match {
    Cons(where { n > 0 }) { |h, t| t.drop(n - 1) }
    Cons()                { |_, _| self }
    Nil() { raise EmptyListError }
  }
end

See the linked list implementation in the specs for more examples

With guard clauses

Threenum::Unary(5).match {
  Nullary() {     0 }
  Unary()   { |u| u }
  Binary(where { a.is_a?(Fixnum) && b.is_a?(Fixnum) }) { |a, b| a + b }
  Binary()  { |a, b| raise "Expected a, b to be numbers" }
}                                      # => 5

Implementing methods for enums

Deterministic::impl(Threenum) {
  def sum
    match {
      Nullary() {        0 }
      Unary()   { |u|    u }
      Binary()  { |a, b| a + b }
    }
  end

  def +(other)
    match {
      Nullary() {        other.sum }
      Unary()   { |a|    self.sum + other.sum }
      Binary()  { |a, b| self.sum + other.sum }
    }
  end
}

Threenum.Nullary + Threenum.Unary(1)   # => Unary(1)

All matches must be exhaustive, i.e. cover all variants

Maybe

The simplest NullObject wrapper there can be. It adds #some? and #null? to Object though.

require 'deterministic/maybe' # you need to do this explicitly
Maybe(nil).foo        # => Null
Maybe(nil).foo.bar    # => Null
Maybe({a: 1})[:a]     # => 1

Maybe(nil).null?      # => true
Maybe({}).null?       # => false

Maybe(nil).some?      # => false
Maybe({}).some?       # => true

Mimic

If you want a custom NullObject which mimicks another class.

class Mimick
  def test; end
end

naught = Maybe.mimick(Mimick)
naught.test             # => Null
naught.foo              # => NoMethodError

Inspirations

• My Monadic gem of course
• #attempt_all was somewhat inspired by An error monad in Clojure (attempt all has now been removed)
• Pithyless' rumblings
• either by rsslldnphy
• Functors, Applicatives, And Monads In Pictures
• Naught by avdi
• Rust's Result

Installation

Add this line to your application's Gemfile:

gem 'deterministic'

And then execute:

$ bundle

Or install it yourself as:

$ gem install deterministic

Contributing

1. Fork it
2. Create your feature branch (git checkout -b my-new-feature)
3. Commit your changes (git commit -am 'Add some feature')
4. Push to the branch (git push origin my-new-feature)
5. Create new Pull Request